Details
PP partition wall, 353 x 180 x 3 mm, spacing 20 mmspacing 14 x 20 mm (15 slots). "EPAstore"
with external support AS = approx. 14 mm
volume conductive (DIN EN 61340-5-1)
- Compartments Compartments
- 14
- Grid spacing [mm] Grid spacing [mm]
- 20
- Slots Slots
- 15
- AS External support
- yes
- Color DefaultColor
- black
- H [mm] Height
- 180
- L [mm] Length
- 353
- Thickness [mm] Thickness
- 3
- Conductivity conductivity
- volume conductive
- Surface resistance Rs Surface resistance
- 106 Ω
- Material BasicMaterial
- polypropylene
- Material structure Material structure
- cavity material
- Suitable for containers Suitable for containers
- 600x400 / 400x300
- Weight [g/m²] Weight Material
- 600
In order to satisfy the constantly increasing requirements in electronics manufacturing you must protect your components against electrostatic discharge.
The ESD-safe parting inserts for Euro containers complete your workstation.
Parting inserts facilitate the removal of components to be processed from containers. Cut-outs can be adapted to your requirements. You will find hereinafter our standard parting inserts for the most common applications.
Technical data for standard versions
| Lateral length container: | - 300 / 400 / 600 mm outside |
| - 253 / 353 / 553 mm inside | |
| Partition heights: | - 80 / 120 / 180 mm |
| Thicknesses: | - 3.0 mm (weight 600g/m²) |
| - 3.5 mm extra sturdy (weight 800g/m²) |
- available with different raster widths/numbers of subdivisions
- volume conductive
- In compliance with ESD standard DIN EN 61340-5-1 
customizable
Upon request - Standard partitions
- specific heights between 30 - 600 mm
- handhold cut-outs
Also for KLT containers
| H | = | Partition height (80, 120 or 180 mm) |
| L | = | Partition length (253, 353 or 553 mm) |
| G | = | Grid spacing |
| AS | = | External support (if existing) |
| SW | = | Slot width |
Technical data for standard versions
| Lateral length container: | - 300 / 400 / 600 / 800 mm |
| Thicknesses: | - 3.0 mm (weight 600g/m²) |
| - 3.5 mm extra sturdy (weight 800g/m²) |
- available in different dimensions with different cut-outs
- electrostatically volume conductive
- In compliance with ESD standard DIN EN 61340-5-1
Handhold cut-outs for easier removal from Euro containers available in 3 versions:
- Standard: 2 corners sloped
- Type A: 2 handhold cut-outs semicular 34 X 17 mm
- Type C: 2 grip holes round 30 mm
In our product range you will find a wide selection of interlayers and parting inserts (partitions) for the use in transport containers. The combination is ideal for transporting different components susceptible to ESD. Available in 3 different materials for various requirements
PP cavity material:
- made of extruded polypropylene (PP)
- high abrasion resistance
- low weight
PS solid material:
- made of polystyrene (PS)
- high abrasion resistance
- high stability
- made of polyethylene foam (PE)
- abrasion-resistant and corrosion-free
- very low weight
Our standard dimensions are based on the most commonly used Euro transport containers.
If you don't find what you are looking for among our standard dimensions, please don't hesitate to ask us for customer-specific dimensions.
Downloads
- Please log in to download datasheets! :
- There are several datasheets for this product. Please log in!
