TP / TS 1 - OLAMEF

The TP / TS 1 is a pneumatically operated cutting and bending machine for loose, radial components. It was developed for the precise shortening and forming of wire connections - ideal for preparing components for manual or automatic PCB assembly.

The machine is operated via a foot switch, which significantly simplifies and speeds up the work process. It delivers consistent, reproducible results and thus supports a stable production process.

Thanks to interchangeable tools, the TP / TS 1 can be flexibly adapted to different component shapes and requirements. This makes it a practical solution for efficient and reliable component preparation in electronics production

The image shows a mechanical device that has two transparent chambers, connected by a metal part. There are two lids on top and a connection for air at the bottom.
Pneumatic cutting beading machine TP / TS 1
TP/TS 1 cutting and beading machine for
loose radial components, P = 45 mm
Basic machine ++ without processing tools++
(Model 18.0000)

Product No.: 415.927.G
3.495,00 EUR
excl. 19% tax
Show product
The image displays a technical diagram with a sketch of an element and a table with dimensions. The table includes minimum and maximum measurements in millimeters for various parameters.
Tool stand-off / snap-in
Tool kit + stand-off/snap-in + + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 600 TS 1)

Product No.: 415.928.180600
994,70 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component, likely an LED, and a table with measurements for the dimensions a, b, c, and D. The table includes minimum and maximum values in millimeters.
LED tool stand-off / snap-in
Tool kit + stand-off/snap-in + LED
+ standard +, P = 2.54 mm
(tool code 180 700 TS 1)

Product No.: 415.928.180700
685,30 EUR
excl. 19% tax
Show product
The image displays a technical drawing and a table. On the left is a view of a component with various dimensions, while on the right, the table contains minimum and maximum values for certain dimensions.
Tool stand-off
Tool kit + stand - off + + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 800 TS1)

Product No.: 415.928.180800
994,70 EUR
excl. 19% tax
Show product
The image shows a technical drawing of a component with dimensions in a table. On the left is a schematic representation, on the right are dimensions listed in millimeters.
Tool snap-in
Tool kit + snap-in + component lying on PCB
+ standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 900 TS 1)

Product No.: 415.928.180900
994,70 EUR
excl. 19% tax
Show product
The image shows a technical drawing with a schematic component and a table. The table lists dimensions (Min./Max.) for various diameters and heights.
Cutting tool
Tool kit + just cut + + standard
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 000 TS 1)

Product No.: 415.928.181000
810,65 EUR
excl. 19% tax
Show product
The image displays a technical drawing and a table. The drawing illustrates two cylindrical components with dimensions. The table includes minimum and maximum measurements in millimeters for various parameters.
Tool diode with 4 leads stand-off
Tool kit + stand-off + diode with 4 leads
+ standard +, P = 5.08 mm
(tool code 181 100 TS 1)

Product No.: 415.928.181100
685,30 EUR
excl. 19% tax
Show product
The image shows a technical drawing of an LED with dimensions and a table that contains minimum and maximum values for various measurements.
LED tool polarity stand-off /snap-in
Tool kit + stand-off / snap-in + LED polarity
+ standard +, P = 2.54 mm
(tool code 181 200 TS 1)

Product No.: 415.928.181200
744,05 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component with dimensions. On the left is a schematic representation, on the right a table with minimum and maximum size specifications for various measurements.
Tool 90° bend and cut
Tool set 90 ° bend and cut
+ standard +, b = 6 mm fix
(tool code 181 300 TS 1)

Product No.: 415.928.181300
1.114,35 EUR
excl. 19% tax
Show product
The image displays a technical drawing with a cross-section and a table. The table lists dimensions (a, b, c, d, D) with minimum and maximum values in millimeters, as well as fixing points.
Tool SMD mounting, bend and cut
Tool kit SMD mounting bend and cut
+ standard +, b = 2 mm fix, c = 2.5 mm fix
(tool code 181 400 TS 1)

Product No.: 415.928.181400
1.114,35 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component with dimensions in millimeters. Next to the drawing is a table with minimum and maximum values for various measurements.
Tool stand-off
Tool kit + stand-off + bead inside + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 500 TS 1)

Product No.: 415.928.181500
994,70 EUR
excl. 19% tax
Show product
The image shows a technical drawing of a component with dimensions for various distances and diameters in a table format. On the left is a schematic representation of the component, on the right is the corresponding dimension table.
Tool increasing pitch
Tool kit increase/cut grid dimension
+ standard + from 2.54 to 5.08 mm
(tool code 181 700 TS 1)

Product No.: 415.928.181700
725,95 EUR
excl. 19% tax
Show product
The image shows a technical drawing of a component with a rectangular head and two usable connectors. Next to it is a table with dimensions in millimeters.
Tool reducing pitch
Tool kit reduce/cut grid dimension
+ standard + from 5.08 to 2.54 mm
(tool code 181 800 TS 1)

Product No.: 415.928.181800
725,95 EUR
excl. 19% tax
Show product
The image shows a technical drawing with the dimensions of a part, schematically represented on the left, and on the right a table with minimum and maximum values for various dimensions (a, b, c).
Tool TO-220
Tool kit TO 220 center lead spread/
cut + standard +, p = 2.54 mm fix
(tool code 182 100 TS 1)

Product No.: 415.928.182100
994,70 EUR
excl. 19% tax
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch with lines and labels for dimensions. On the right, there is a table with minimum and maximum values in millimeters.
Tool TO-220, center lead
Tool kit TO 220 center lead bead / spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 200 TS 1)

Product No.: 415.928.182200
1.158,40 EUR
excl. 19% tax
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with min. and max. values for a, b, c, and p.
Tool TO-220
Tool kitTO 220 center lead spread /
bead / cut + standard +, p = 2.54 mm fix
(tool code 182 300 TS 1)

Product No.: 415.928.182300
1.269,05 EUR
excl. 19% tax
Show product
1 to 16 (from a total of 22)