Dissipative flooring made vinyl DIN EN 649, homogeneous
suitable for the use with following requirements:
- resistance to ground RE according to DIN EN 1081 < 106 ohm
and/or
- resistance to ground RE according to IEC 6-1340 5 x 104 Ohm to < 106 Ohm (ECF)
without chemical antistatic agents, conductive back coating, ensuring the electrical properties during the entire useful life; super-compact, cut from the block, low plasticizer concentration, suitable for chair castors DIN EN 12529 type W.
Fire behaviour DIN 4102-1 class B1/Q1 (hardly inflammable/little smoke) EN 13501-1 class Bfl-S1, chemical resistance according to EN 423, suitable for abrasive cleaning technique.
| Thickness: | 2.0 mm |
| Tile width: | 61 x 61 cm |
veined, smooth surface, to be bonded on completely smoothed surfaces with conductive dispersion adhesive < 5 x 104 ohm.
Technical data:
| CE mark | EN 14014 | compliant |
| Surface | smooth | |
| Total thickness | EN ISO 24346 | 2,0 mm |
| Tile size | EN ISO 24342 | 615 x 615 mm |
| Basis weight | EN ISO 23997 | 3.2 kg/m² |
| Tile weight | 3.2 kg | |
| Fire behavior | EN 13501-1 | Bfl -s1 |
| Thermal conductivity | EN 12524 | 0.25 W/(m-K) |
| Slip resistance | ||
| EN 51130 | R9, µ ≥ 0.3 | |
| Chair castor load | ISO 4918 | suitable (type W) |
| Electric resistance | IEC 61340-4-1 | < 1 x 106 Ohm - < 1 x 108 Ohm |
| ESD STM7.1 | ||
| Walk charging | IEC 61340-4-5 | < 100 V |
| ESD STM 97.2 | ||
| EN 1815 | ||
| Impact sound reduction | EN ISO 140-8 | 2 dB |
| Trafficability with hard tires (Variations possible depending on local conditions) | Lift truck and forklifts: up to a total weight from 2.5 t to 5 t with pneumatic tires. Static: 50 kg/cm³ - dynamic 90 kg/cm³ | |
| Chemical resistance | EN ISO 26987 | very good |
| Recyclable | yes | |
Structure of ColoRex
ColoRex contains dimensionally stable chips with a conductive coating instead of "liquid" chemical additives (antistatic agents).
Thus, the electrical properties of the surface are permanently constant. Furthermore, the conductivity is not affected by air humidity and aging.
ColoRex is turned into a highly durable covering because of the homogeneity achieved by the extremely high-pressure production. So, it is not only resistant to a high point load, but, due to its best wear-resistance, also to any damages caused by static and dynamic loads.
Possibilities of use
Due to its highly compacted material the surface of ColoRex is completely smooth and nonporous. Therefore, it is also suitable for the use in cleanrooms. In addition, it has extremely low emission, which is getting more and more important for the use in cleanrooms.
Repair
Even damages on ColoRex, such as long and deep scratches, holes, burns and other more or less serious surface damages, can be repaired effectively and easily without a trace and without affecting the original properties of the flooring. This 100% repairability is a unique characteristic of ColoRex.
Care and maintenance
Loosely floating dust can be removed by vacuuming or damp mopping with impregnated disposable wipes. Alternatively, the floor can be cleaned by spray with a single-disk machine with red pad and spray device with a neutral and wax free cleaning solvent. Large areas must be cleansed with a suitable scrubbing machine. Borders have to be cleaned manually.
Details
ColoRex EC - ESD flooringColors: in accordance with color card
Tiles 610 x 610 mm = 0.3721 m², thickness: 2 mm
(DIN EN 61340-5-1)
- Color Color
- see color selection
- Width [mm] Width [mm]
- 615
- Length [mm] Length [mm]
- 615
- Thickness [mm] Thickness [mm]
- 2
- Fire class Fire class
- Bfl – s1
- Bleeder resistance Bleeder resistance
- 106 - 108 Ω
- Weight Weight
- 3.2 kg
Accessories
Downloads
- Please log in to download datasheets! :
- There are several datasheets for this product. Please log in!
