Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco EPApro Gotschlich ideal tek SCS Simco
The image shows a compact, rectangular device in black with a yellow top layer that reads
Veribox
ESD
VERIBOX for the testing of high ohmic
measuring instruments before use

Product No.: 7100.VB
121,75 EUR
excl. 19% tax
Show product
The image shows a black label printer mounted on a stand. It has a roll of labeled adhesive labels, which are partially visible and protruding horizontally.
Label printer for PGT 120-COM Data Terminal
Printer for Data Terminal
Labels 36 x 67 mm

2 Products
Product No.: 7100.PGT120.COM.D.3
Price on request
to the product family
The image shows an RFID reader with a black casing and a yellow marking. A cable with a USB connection leads away from it. The reader is used for wireless data transmission.
Preview: The image shows an RFID reader with a black casing and a yellow marking. A cable with a USB connection leads away from it. The reader is used for wireless data transmission.
Preview: The image shows five white, rectangular plastic cards stacked on top of each other. Each card has numbers and letters embossed on one side. The background is gray.
Card reader and ID card
External card reader (USB)
Transponder ID card

2 Products
Product No.: 7100.PGT.XK.V4
Price on request
to the product family
The image shows a device casing with a cable and plug. On the front, there is a circular grille for air exchange, equipped with a small slider.
Preview: The image shows a device casing with a cable and plug. On the front, there is a circular grille for air exchange, equipped with a small slider.
Preview: The image shows a white-gray fan attached to a movable arm. The arm is made of metal and is green. The fan has a grid for air circulation and a small control light.
%
%
Further accessories for table ionizers
Power supply for ION type 6422
Spring joint arm for ionizer minION

2 Products
Product No.: 7500.6422.N
from 199,20 EUR
from 81,50 EUR
excl. 19% tax
to the product family
The image shows an elongated, white bar with two black pads at the ends. In the middle, there is a blue area with controls, presumably for operation.
Preview: The image shows two elongated, silver ventilation devices. Each has a blue control area with buttons and symbols. The devices are arranged one above the other. They are designed to be sturdy and functional.
Preview: The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
Preview: The image shows an elongated, white bar with two black pads at the ends. In the middle, there is a blue area with controls, presumably for operation.
Accessories for overhead ionizers
ESD-protective
Air filter frame for ionizer Aerostat CR2000
Air filter element / replacement (PU 6 pieces) for ionizer Aerostat CR2000
Power cable for ionizing blower 5810i
Air filter frame for ionizer Aerostat GUARDIAN
Air filter element / replacement (PU 6 pieces) for ionizer Aerostat GUARDIAN

5 Products
Product No.: 7500.G.Z11
from 16,00 EUR
excl. 19% tax
to the product family
The image displays a black barrier with yellow horizontal stripes. In the center, there is a yellow symbol shaped like a triangle featuring a fire icon and the inscription
EPA barrier banner incl. 2 cartridges
ESD
EPA stop banner incl. 2 cartridges with
metal connectors, dissipative vinyl, washable
dimensions.: 1220 x 840 mm, holm length 1340 mm
Exterior printed with EPA logo
2 post pipes are required for installation
(not included)

Product No.: 1801.B.V
356,25 EUR
excl. 19% tax
Show product
The image shows a metal turnstile. It has a rectangular shape with a horizontal bar that rotates when pushed. On the side, there are sometimes readers or QR code scanners.
Preview: The image shows a metal turnstile. It has a rectangular shape with a horizontal bar that rotates when pushed. On the side, there are sometimes readers or QR code scanners.
Preview: The image shows a stainless steel turnstile. It has a rectangular shape with three horizontal arms that rotate to control the entrance.
Barrier system MODUL CROSS
Turnstile MODUL CROSS 2-arm
passage width: 550 mm / Version: individual system / Drive type: motor drive / Operation mode: unidirectional operation / bidirectional operation / Locking arm/element: 2 arms, straight rail
Turnstile MODUL CROSS 3 arms
passage width: 550 mm / Version: individual system / Drive type: motor drive / Operation mode: unidirectional operation / bidirectional operation / Locking arm/element: 3 arms, straight rail

2 Products
Product No.: 6MCR.2.AEC
Price on request
to the product family
The image shows a low, curved metal barrier. It has two horizontal bars and is securely anchored at both ends. It appears simple and functional.
Lane divider IKARUS HOLM
Lane divider "IKARUS HOLM"
Height: 1000mm, external width: 900mm


Divided with a horizontal bar, fitting with floor flange, screw connection covered with rosette. Material: iameterm 40 mm, V2A surface brushe
d MADE IN EUROPE

Product No.: 6ISP.2SIH10
Price on request
Show product
Image
Installation of turnstiles and swing doors
Installation of a turnstile / swing door
Installation of two turnstiles / swing doors
Installation of three turnstiles / swing doors
Installation of four turnstiles / swing doors

4 Products
Product No.: 70007-1
Price on request
to the product family
The image shows a rectangular device with a yellow frame and a screen. The display shows information such as temperature, humidity, and a date/time stamp. An RFID symbol is visible.
Data Terminal Controller DT3
Data terminal controller DT3 incl. display, RFID
Reader and relay contact


Interfaces:
x USB
1 x D-SUB9 für PGT120.COM
1 x RJ45 - LAN
1 x RJ12 - Relais
1 x Micro USB - RFID Reader
1 x Micro USB - POWER 5VDC

Product No.: 7100.PGT120.COM.DT3
Price on request
Show product
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide

Product No.: 7100.PGT120.COM.TC18
Price on request
Show product
The diagram displays a system layout with multiple gates (1, 2, 32) connected via Ethernet. There is a data collector, user, and measurement data management.
Software for "Data Collection", CD-ROM
Software for "Data collection" on CD-ROM

Product No.: 7100.PGT120.COM.SOFT
Price on request
Show product
The image shows a white shoe with a transponder pocket, a cable, and a shoe electrode. This is used for separate measurement of left and right shoes.
Preview: The image shows a white shoe with a transponder pocket, a cable, and a shoe electrode. This is used for separate measurement of left and right shoes.
Preview: The image shows a simple, flat, rectangular card in white. It has no visible patterns or text and resembles a credit card. The surface is smooth.
Accessories for PGT2000 Personal test station
ESD-protective
ID module (transponder)
ID card (transponder card)

2 Products
Product No.: 7100.PGT2000.ID.V2
from 6,10 EUR
excl. 19% tax
to the product family
The image shows a device called
Preview: The image shows a device called
Preview: The image displays an electronic device labeled
Workstation monitor WS Aware
ESD-protective
WS Aware Workstation monitor Standard Remotes
ESD / Width : 81 mm / Height : 32 mm / Length : 57 mm / Recommended calibration interval: 12 months bzw. according to test equipment list
WS Aware Workstation monitor Big Brother
ESD / Width : 81 mm / Height : 32 mm / Length : 57 mm / Recommended calibration interval: 12 months bzw. according to test equipment list

2 Products
Product No.: 770067
from 941,00 EUR
excl. 19% tax
to the product family
The image displays a device with a black casing and a labeled screen. There are buttons and LEDs to indicate statuses like
Workstation monitor tester CTE701A
ESD
Workstation monitor tester 3M type CTE701A

Product No.: 3M-CTE701A
1.346,00 EUR
excl. 19% tax
Show product
The image shows a compact, rectangular device with a silver casing. On the front, there are five LED lights (red and green) and a rotary knob. Below it reads
Workstation monitor Ground Man Plus CTC334
ESD
Ground Man Plus type 3M-CTC334-WW
with 120V/240V power supply unit

Product No.: 3M-CTC334
353,00 EUR
excl. 19% tax
Show product
81 to 96 (from a total of 123)