Component processing

The precise preparation of electronic components is an essential production step and ranges from counting to mechanical processing. Component counting balances and counting devices for various designs such as axial or radial are used. For mechanical processing, cut-off saws as well as pneumatic and mechanical cutting and bending machines are available to ensure efficient and gentle processing. These solutions are designed for high productivity, repeat accuracy and component protection and are suitable for series production, prototyping and repair processes in electronics production.

The image shows a technical drawing of an LED with dimensions and a table that contains minimum and maximum values for various measurements.
LED tool polarity stand-off /snap-in
Tool kit + stand-off / snap-in + LED polarity
+ standard +, P = 2.54 mm
(tool code 181 200 TS 1)

Product No.: 415.928.181200
744,05 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component with dimensions. On the left is a schematic representation, on the right a table with minimum and maximum size specifications for various measurements.
Tool 90° bend and cut
Tool set 90 ° bend and cut
+ standard +, b = 6 mm fix
(tool code 181 300 TS 1)

Product No.: 415.928.181300
1.114,35 EUR
excl. 19% tax
Show product
The image displays a technical drawing with a cross-section and a table. The table lists dimensions (a, b, c, d, D) with minimum and maximum values in millimeters, as well as fixing points.
Tool SMD mounting, bend and cut
Tool kit SMD mounting bend and cut
+ standard +, b = 2 mm fix, c = 2.5 mm fix
(tool code 181 400 TS 1)

Product No.: 415.928.181400
1.114,35 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component with dimensions in millimeters. Next to the drawing is a table with minimum and maximum values for various measurements.
Tool stand-off
Tool kit + stand-off + bead inside + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 500 TS 1)

Product No.: 415.928.181500
994,70 EUR
excl. 19% tax
Show product
The image shows a technical drawing of a component with dimensions for various distances and diameters in a table format. On the left is a schematic representation of the component, on the right is the corresponding dimension table.
Tool increasing pitch
Tool kit increase/cut grid dimension
+ standard + from 2.54 to 5.08 mm
(tool code 181 700 TS 1)

Product No.: 415.928.181700
725,95 EUR
excl. 19% tax
Show product
The image shows a technical drawing of a component with a rectangular head and two usable connectors. Next to it is a table with dimensions in millimeters.
Tool reducing pitch
Tool kit reduce/cut grid dimension
+ standard + from 5.08 to 2.54 mm
(tool code 181 800 TS 1)

Product No.: 415.928.181800
725,95 EUR
excl. 19% tax
Show product
The image shows a technical drawing with the dimensions of a part, schematically represented on the left, and on the right a table with minimum and maximum values for various dimensions (a, b, c).
Tool TO-220
Tool kit TO 220 center lead spread/
cut + standard +, p = 2.54 mm fix
(tool code 182 100 TS 1)

Product No.: 415.928.182100
994,70 EUR
excl. 19% tax
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch with lines and labels for dimensions. On the right, there is a table with minimum and maximum values in millimeters.
Tool TO-220, center lead
Tool kit TO 220 center lead bead / spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 200 TS 1)

Product No.: 415.928.182200
1.158,40 EUR
excl. 19% tax
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with min. and max. values for a, b, c, and p.
Tool TO-220
Tool kitTO 220 center lead spread /
bead / cut + standard +, p = 2.54 mm fix
(tool code 182 300 TS 1)

Product No.: 415.928.182300
1.269,05 EUR
excl. 19% tax
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with values for a, b, and c, including minimum and maximum values.
Tool TO-220, in-line stand-off / snap-in
Tool kit TO-220 in-line stand off/snap-in
+ standard +, p = 2.54 mm fix
(tool code 182 400 TS 1)

Product No.: 415.928.182400
1.230,65 EUR
excl. 19% tax
Show product
The image displays technical drawings of a component with various dimensions. On the left, a side and top view are shown, while on the right, there is a table with minimum and maximum dimensions.
Tool TO-220 90° bending
Tool kit TO 220 90 ° bend, center
lead spread + standard +
(tool code 183100 TS 1)

Product No.: 415.928.183100
1.415,80 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a component with dimensions and a table. The table lists the minimum and maximum dimensions for the parameters a, b, c, and p.
Tool TO-92, center lead
Tool kit TO 92 center lead spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 500 TS 1)

Product No.: 415.928.182500
994,70 EUR
excl. 19% tax
Show product
The image shows a technical drawing with dimensions. On the left is a schematic representation of a component, on the right a table with minimum and maximum dimensions for various parameters.
Tool TO-92, center lead
Tool kit TO 92 center lead bead /
spread / cut + standard +, p = 2.54 mm fix
(tool code 182 600 TS 1)

Product No.: 415.928.182600
1.158,40 EUR
excl. 19% tax
Show product
The image displays a technical drawing of a fastening element with dimensions and a table. On the left is a schematic representation, while the right shows minimum and maximum dimensions for various measurements.
Tool TO-92, center lead
Tool kit TO 92 center lead spread /
bead / cut + standard +, p = 1.27 mm fix
(tool code 182 700 TS 1)

Product No.: 415.928.182700
1.269,05 EUR
excl. 19% tax
Show product
On the left is a technical drawing of an element with dimensions, on the right a table with two rows. The table lists minimum and maximum dimensions for the columns a, b, and c, as well as the word
Tool TO-92, in-line stand-off / snap-in
Tool kit TO-92 in-line stand off/snap - in
+ standard +
(tool code 182 800 TS 1)

Product No.: 415.928.182800
1.230,65 EUR
excl. 19% tax
Show product
The image shows a compact machine setup with an engine and various mechanical parts. It has buttons and an emergency stop area, as well as a workspace on the left side.
Cut-off saw Olamef
Cut-off saw Olamef
Saw blade (for strips saw SEP-4/Olamef)

2 Products
Product No.: 415.1090002
from 79,00 EUR
excl. 19% tax
to the product family
49 to 64 (from a total of 64)