The image shows a counting and verifying device for banknotes. It has a blue base, a digital display, and buttons. There is a black insertion device for bills at the top.
The image shows a device setup for labeling. In the center is a blue device with buttons, with rolls of labels and a printer on the left and right. A hand is holding a scanner.
Preview: The image shows a counting and verifying device for banknotes. It has a blue base, a digital display, and buttons. There is a black insertion device for bills at the top.
Preview: The image shows a device setup for labeling. In the center is a blue device with buttons, with rolls of labels and a printer on the left and right. A hand is holding a scanner.
County EVO, counting device 220 V / 50-60 Hz
(Product No.: 400.013)
The image shows a counting and verifying device for banknotes. It has a blue base, a digital display, and buttons. There is a black insertion device for bills at the top.
The image shows a device setup for labeling. In the center is a blue device with buttons, with rolls of labels and a printer on the left and right. A hand is holding a scanner.
Mobile Preview: The image shows a counting and verifying device for banknotes. It has a blue base, a digital display, and buttons. There is a black insertion device for bills at the top.
Mobile Preview: The image shows a device setup for labeling. In the center is a blue device with buttons, with rolls of labels and a printer on the left and right. A hand is holding a scanner.
Notice / Inquire

County EVO, counting device 220 V / 50-60 Hz

dpvlink:
5067
Voltage:
220 V
Axial tape width:
55 - 110 mm
Radial tape width:
18 mm
Further product information
 
available available
922,00 EUR
per PCE

excl. 19% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

County EVO, counting device 220 V / 50-60 Hz

The County EVO is an advanced component counting device specifically designed for precise counting of taped axial, radial, and SMD components. It operates at a voltage of 220 V and a frequency of 50-60 Hz. The width of the device is 130 mm, the height is 110 mm, and the depth is 240 mm, with a weight of 1.8 kg. The tape width for axial components ranges between 55 and 110 mm, while for radial components it is 18 mm.
Equipped with a microcomputer, the device allows counting in both directions and offers a division factor from 1 to 19, in addition to multiplication factors for smaller components such as 0402, 0201, and 01005. It features a total piece count capture and a preset piece count with an acoustic signal when the preset quantity is reached. A calibration test and self-diagnosis are integrated, as well as a memory for the last counted quantity.
Model 400.013 of the County EVO includes a battery, connections for a barcode reader, and printer/PC output. It is also equipped with a clock and a datalogger that stores the last 500 counts, enabling efficient tracking and analysis.
Voltage
Voltage
220 V
Axial tape width
Axial tape width
55 - 110 mm
Radial tape width
Radial tape width
18 mm
Depth
Depth
240 mm
Height
Height
110 mm
Width
Width
130 mm
Weight
Weight
1.8 kg
Show accessories
Accessories

Accessories

Image
Adapter for taped SMD components for County...
SMD adapter for taped SMD components
Mod. 8301.018
dpvlink
5067

179,00 EUR
Show product
The image shows a device with a large, round cardboard disc mounted on a blue stand. Next to the disc is a digital control panel with buttons.
Reel stand for axial/radial components for...
Reel stand for axial/radial components
Mod. 8301.023
dpvlink
5067

179,00 EUR
Show product
The image shows a physical experiment apparatus. It has a large, round wooden wheel on a stable blue base, with a digital display and buttons for control.
Handle for reels for County EVO
Hand crank for rolls (axial/radial)
for reel stand 400.023
dpvlink
5067

30,00 EUR
Show product
The image shows a blue spinner that stands on a wide, round base. In the center, there is a black, raised handle or pin used for spinning.
 Discontinuing
 Discontinuing
Unroll stand for SMD components for County...
SMD unroll holder
Mod. 8301.028
dpvlink
5067

81,00 EUR
Show product
The image shows a black L-shaped handle used for turning or cranking. The handle has a smooth surface and a round opening at one end.
Crank for SMD reel stand for County EVO
Hand crank for SMD reel stand
dpvlink
5067

22,00 EUR
Show product
The image shows a white label printer with a glossy lid and a green button. Next to it is a roll of white labels that is being unrolled.
Thermal printer
Thermal printer for County EVO + County-S EVO
Model 8301.095
Serial no.: ………………………………..

(suitable for County EVO model 8301.082 and County S EVO model 8301.131 / model. 8301.133)
dpvlink
19245

664,00 EUR
Show product
The image shows an electronic measuring station with a display, connected to two plates and a printer. A hand is holding a barcode scanner.
Label roll
Label roll with 1360 labels 57 x 51 mm
Model 8301.096


(suitable for thermal printer article no. 400.095 / model 8301.095)
dpvlink
19245

28,75 EUR
Show product
The image shows a blue device with two round discs on top and a printer next to it. A hand is holding a barcode scanner. The device has a display and buttons for operation.
Barcode reader
Bar code reader for County EVO + S EVO
Model 8301.155
Serial no.: ………………………………..
dpvlink
19245

300,80 EUR
Show product
NEW
NEW

176,00 EUR
Show product
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Product Family

County EVO

Component counting device for axial, radial and SMD components

Technical data:

min. leads Ø:

0.4 mm

Tape width axial:

55 - 110 mm

Tape width radial:

18 mm

max. component Ø:

14 mm

Display 4-line:

height 13 mm

Dimensions:

240 x 130 x 110 mm

Weight:

1.8 kg


Article image
Article description
ESD
Voltage
Axial tape width
Radial tape width
Depth
Height
Width
Weight
Price
Compare
400.011 - County EVO, counting device 100 - 240 V / 50-60 Hz
400.011
County EVO, counting device 100 - 240 V / 50-60 Hz
100 - 240 V
55 - 110 mm
18 mm
240 mm
110 mm
130 mm
1.8 kg
768,00 EUR
400.013 - County EVO, counting device 220 V / 50-60 Hz
400.013
County EVO, counting device 220 V / 50-60 Hz
220 V
55 - 110 mm
18 mm
240 mm
110 mm
130 mm
1.8 kg
922,00 EUR
400.023 - Reel stand for axial/radial components for County EVO
400.023
Reel stand for axial/radial components for County EVO
 
 
 
 
 
 
 
179,00 EUR
400.020 - Adapter for taped SMD components for County EVO
400.020
Adapter for taped SMD components for County EVO
 
 
 
 
 
 
 
179,00 EUR
400.027.1 - Crank for SMD reel stand for County EVO
400.027.1
Crank for SMD reel stand for County EVO
 
 
 
 
 
 
 
22,00 EUR
400.025 - Handle for reels for County EVO
400.025
Handle for reels for County EVO
 
 
 
 
 
 
 
30,00 EUR
 Discontinuing
400.027 - Unroll stand for SMD components for County EVO
400.027
Unroll stand for SMD components for County EVO
 
 
 
 
 
 
 
81,00 EUR
Show Compare List (0)

This product is similar to: