Soldering and desoldering tips

These high-quality soldering and desoldering tips are characterized by precision, durability and efficient heat transfer. They are optimally matched to modern soldering tools and enable reliable work on a wide range of soldering tasks - from professional electronics work to delicate repair work.

Thanks to fast heat-up times and intelligent cutting-edge technologies, they offer consistent performance for both delicate and power-intensive applications. A wide range of shapes and sizes ensures that the right tip is available for every requirement. Weller and JBC soldering tips are system-specific and only compatible with the respective soldering stations.

Factors restricting the service life of tips

Flux and solder alloy

Too much active flux can cause corrosion. IPC recommends: ROL, REL and ORL. The internal flux of small diameter solder rolls may not be sufficient. Provide compatible external flux if required.

Oxidation

Iron oxide does not wet well and does not transfer temperature (dewetting). The higher the temperature, the greater the risk of oxidation. Always keep the soldering tips tinned when not in use. Use flux for your solder joints. Use the sleep and hibernate functions.

Thickness of the iron coating

Plate wear shortens the service life of the tip (hollowing). Use the cleaning methods specified by the manufacturer. Do not apply too much pressure to the tip.

Correct techniques

Excessive pressure on the soldering surface can cause the tip or plate to break. Do not use as a pointed object or screwdriver. Select the largest possible tip for each application and work at the lowest possible temperature.

Working temperatures

The higher the temperature, the greater the oxidation and corrosion. Work at the lowest possible temperature. Use thermally efficient tools and ensure that the tips are free from oxidation.

Our Brands

NEW

Soldering tips series T53

		Soldering tip conical T53-B05 Soldering tip shape: tapered / Head size: 0.5 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 10.0 mm
		Soldering tip conical sloped 45° T53-BC2030 Soldering tip shape: sloped 45° / Head size: 2.0 x 3.0 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 12.0 mm
		Soldering tip sloped 45° T53-BC4060 Soldering tip shape: sloped 45° / Head size: 4.0 x 5.0 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 8.0 mm
		Soldering tip sloped 45° T53-BC6090 Soldering tip shape: sloped 45° / Head size: 6.0 x 9.0 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 8.0 mm
		Soldering tip sloped 45° with slotT53-BCR1645 Soldering tip shape: sloped 45° / Head size: 1.5 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 10.0 mm
		Soldering tip chisel-shaped T53-D16 Soldering tip shape: chisel-shaped / Head size: 1.6 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 10.0 mm
		Soldering tip chisel-shaped T53-D24 Soldering tip shape: chisel-shaped / Head size: 2.4 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 7.0 mm
		Soldering tip chisel-shaped T53-D32 Soldering tip shape: chisel-shaped / Head size: 3.2 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 7.0 mm
		Soldering tip chisel-shaped T53-D45 Soldering tip shape: chisel-shaped / Head size: 4.5 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 7.0 mm
		Soldering tip chisel-shaped T53-D52 Soldering tip shape: chisel-shaped / Head size: 5.2 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 7.0 mm
		Soldering tip chisel-shaped with V groove T53-DR32 Soldering tip shape: chisel-shaped / Head size: 3.2 mm / suitable soldering iron: FX 9707 / FX 9707 / Length : 10.0 mm
		Soldering tip chisel-shaped with V groove T53-DR45 Soldering tip shape: chisel-shaped / Head size: 4.5 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 10.0 mm
		Soldering tip chisel-shaped with V groove T53-DR52 Soldering tip shape: chisel-shaped / Head size: 5.2 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 10.0 mm
		Soldering tip blade tip T53-K Soldering tip shape: blade tip / Head size: 5.0 mm / suitable soldering iron: FX 9707 / FX 9708 / Length : 15.0 mm

14 Products

Product No.: HA-T53-D45

from 35,00 EUR

excl. 19% tax

to the product family

NEW

Soldering tip pairs series T52

		Soldering tip conical T52-I005 Soldering tip shape: tapered , straight / Head size: 0.05 mm / suitable soldering iron: FX 9706 / Length : 8.2 mm
		Soldering tip conical T52-I015 Soldering tip shape: tapered , straight / Head size: 0.15 mm / suitable soldering iron: FX 9706 / Length : 8.2 mm
		Soldering tip conical, bent T52-J005 Soldering tip shape: tapered , bent 30° / Head size: 0.05 mm / suitable soldering iron: FX 9706 / Length : 5.7 mm
		Soldering tip conical, bent T52-J015 Soldering tip shape: tapered , bent 30° / Head size: 0.15 mm / suitable soldering iron: FX 9706 / Length : 5.7 mm
		Soldering tip blade tip T52-K Soldering tip shape: blade tip , sloped 45° / Head size: 1.8 mm / suitable soldering iron: FX 9706 / Length : 8.0 mm
		Soldering tip chisel-shaped T52-L1 Soldering tip shape: chisel-shaped , straight / Head size: 1.0 x 0.2 mm / suitable soldering iron: FX 9706 / Length : 8.0 mm
		Soldering tip chisel-shaped T52-L2 Soldering tip shape: chisel-shaped , straight / Head size: 2.0 x 0.2 mm / suitable soldering iron: FX 9706 / Length : 8.0 mm

7 Products

Product No.: HA-T52-L2

from 96,50 EUR

excl. 19% tax

to the product family

NEW

Soldering tip pairs series T51

		Soldering tip cylindrical T51-C05 Soldering tip shape: cylindrical / Head size: 0.5 mm / suitable soldering iron: FX 9705
		Soldering tip conical, thin T51-I05 Soldering tip shape: tapered , thin / Head size: 0.5 mm / suitable soldering iron: FX 9705
		Soldering tip spatula T51-L10 Soldering tip shape: spatula , straight / Head size: 10.0 mm / suitable soldering iron: FX 9705
		Soldering tip spatula T51-L13 Soldering tip shape: spatula / Head size: 13.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form T51-L1 Soldering tip shape: special forme / Head size: 1.0 mm / suitable soldering iron: FX 9705
		Soldering tip spatula T51-L16 Soldering tip shape: spatula / Head size: 16.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form T51-L2 Soldering tip shape: special forme / Head size: 2.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form T51-13 Soldering tip shape: special forme / Head size: 3.0 mm / suitable soldering iron: FX 9705
		Soldering tip spatula T51-L6 Soldering tip shape: spatula / Head size: 6.0 mm / suitable soldering iron: FX 9705
		Soldering tip spatula T51-L8 Soldering tip shape: spatula / Head size: 8.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form bent 45° T51-LA10 Soldering tip shape: special forme , bent 45° / Head size: 10.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form bent 45° T51-LA3 Soldering tip shape: special forme , bent 45° / Head size: 3.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form bent 45° T51-LA6 Soldering tip shape: special forme , bent 45° / Head size: 6.0 mm / suitable soldering iron: FX 9705
		Soldering tip special form bent 45° T51-LA8 Soldering tip shape: special forme , bent 45° / Head size: 8.0 mm / suitable soldering iron: FX 9703

14 Products

Product No.: HA-T51-L2

91,50 EUR

excl. 19% tax

to the product family

NEW

Soldering tips series T50

		Soldering tip chisel-shaped T50-D02 Soldering tip shape: chisel-shaped / Head size: 0.2 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 5.5 mm
		Soldering tip chisel-shaped T50-D04 Soldering tip shape: chisel-shaped / Head size: 0.4 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 5.5 mm
		Soldering tip chisel-shaped T50-D06 Soldering tip shape: chisel-shaped / Head size: 0.6 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 6.0 mm
		Soldering tip chisel-shaped T50-D1 Soldering tip shape: chisel-shaped / suitable soldering iron: FX 9703 / FX 9704 / Length : 6.0 mm
		Soldering tip conical T50-I01 Soldering tip shape: tapered / Head size: 0.1 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 5.5 mm
		Soldering tip conical, bent T50-J01 Soldering tip shape: tapered , bent / Head size: 0.1 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 3.0 mm
		Soldering tip blade tip T50-KN Soldering tip shape: blade tip / Head size: 1.4 mm / suitable soldering iron: FX 9703 / FX 9704
		Soldering tip blade tip T50-KU Soldering tip shape: blade tip / Head size: 1.8 mm / suitable soldering iron: FX 9703 / FX 9704 / Length : 7.0 mm

8 Products

Product No.: HA-T50-KU

from 40,00 EUR

excl. 19% tax

to the product family

NEW

Soldering tips series T36

		Soldering tip conical T36-B
		Soldering tip conical T36-B2
		Soldering tip sloped T36-BC1
		Soldering tip sloped T36-BC2
		Soldering tip sloped T36-BC3
		Soldering tip conical T36-BL
		Soldering tip sloped T36-C1
		Soldering tip sloped T36-C4
		Soldering tip chisel-shaped T36-D08
		Soldering tip chisel-shaped T36-D16
		Soldering tip chisel-shaped T36-D24
		Soldering tip chisel-shaped T36-D52
		Soldering tip chisel-shaped T36-DL32
		Soldering tip thin, conical T36-I
		Soldering tip bent, conical T36-J02
		Soldering tip bent, conical T36-JS02
		Soldering tip blade tip T36-K
		Soldering tip thin, conical T36-ILS

18 Products

Product No.: HA-T36-B2

from 38,00 EUR

excl. 19% tax

to the product family

NEW

Soldering tips series T39

		Soldering tip conical T39-B02 Soldering tip shape: tapered / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 7.5 mm
		Soldering tip conical T39-B05 Soldering tip shape: tapered / Head size: 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip conical T39-B07 Soldering tip shape: tapered / Head size: 0.7 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 5 mm
		Soldering tip conical T39-BL02 Soldering tip shape: tapered / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 12 mm
		Soldering tip conical T39-BLL02 Soldering tip shape: tapered / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 15 mm
		Soldering tip conical T39-BS02 Soldering tip shape: tapered / Head size: 0.2 mm / suitable soldering iron: FX 9701 / Length : 14 mm
		Soldering tip conical T39-BS03 Soldering tip shape: tapered / Head size: 0.3 mm / suitable soldering iron: FX 9701 / Length : 16.5 mm
		Soldering tip sloped 45° T39-BC1020 Soldering tip shape: sloped 45° / Head size: 2.0 x 1.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip sloped 60° T39-BC1530 Soldering tip shape: sloped 60° / Head size: 3.0 x 1.5 mm / Length : 15 mm
		Soldering tip sloped 60° T39-BC2040 Soldering tip shape: sloped 60° / Head size: 4.0 x 2.0 mm / suitable soldering iron: FX 9701 / Length : 15 mm
		Soldering tip sloped 45° T39-BC2535 Soldering tip shape: sloped 45° / Head size: 3.5 x 2.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip sloped 45° T39-BC3545 Soldering tip shape: sloped 45° / Head size: 4.5 x 3.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip sloped 60° T39-BC3065 Soldering tip shape: sloped 60° / Head size: 6.5 x 3.0 mm / suitable soldering iron: FX 9701 / Length : 15 mm
		Soldering tip sloped 45° T39-BCF1020 Soldering tip shape: sloped 45° / Head size: 2.0 x 1.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip sloped 45° T39-BCF2535 Soldering tip shape: sloped 45° / Head size: 3.5 x 2.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip sloped 45° T39-BCF3545 Soldering tip shape: sloped 45° / Head size: 4.5 x 3.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Gullwing tip T39-BCM2335 Soldering tip shape: gullwing , sloped 45° / Head size: 3.5 x 2.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Gullwing tip T39-BCM3545 Soldering tip shape: gullwing , sloped 45° / Head size: 4.5 x 3.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip cylindrical sloped 45° T39-C1020 Soldering tip shape: cylindrical , sloped 60° / Head size: 2.0 x 1.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10.5 mm
		Soldering tip sloped 45° T39-C4055 Soldering tip shape: sloped 45° , cylindrical / Head size: 5.5 x 4.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip sloped 45° T39-CF4055 Soldering tip shape: sloped 45° / Head size: 5.5 x 4.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip chisel-shaped T39-D08 Soldering tip shape: chisel-shaped / Head size: 0.8 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D12 Soldering tip shape: chisel-shaped / Head size: 1.2 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D16 Soldering tip shape: chisel-shaped / Head size: 1.6 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D24 Soldering tip shape: chisel-shaped / Head size: 2.4 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D32 Soldering tip shape: chisel-shaped / Head size: 3.2 x 0.8 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D4 Soldering tip shape: chisel-shaped / Head size: 4.0 x 0.8 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-D52 Soldering tip shape: chisel-shaped / Head size: 5.2 x 1.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip chisel-shaped T39-DL32 Soldering tip shape: chisel-shaped / Head size: 3.2 x 0.8 mm / suitable soldering iron: FX 9701 / Length : 16 mm
		Soldering tip chisel-shaped T39-DL4 Soldering tip shape: chisel-shaped / Head size: 4.0 x 1.0 mm / suitable soldering iron: FX 9701 / Length : 16 mm
		Soldering tip chisel-shaped T39-DL52 Soldering tip shape: chisel-shaped / Head size: 5.2 x 1.2 mm / suitable soldering iron: FX 9701 / Length : 16 mm
		Soldering tip chisel-shaped T39-DLS15 Soldering tip shape: chisel-shaped / Head size: 1.5 x 1.2 mm / suitable soldering iron: FX 9701 / Length : 12 mm
		Soldering tip chisel-shaped T39-DS24 Soldering tip shape: chisel-shaped / Head size: 2.4 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 6 mm
		Soldering tip chisel-shaped T39-DS32 Soldering tip shape: chisel-shaped / Head size: 3.2 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 5 mm
		Soldering tip chisel-shaped T39-DS4 Soldering tip shape: chisel-shaped / Head size: 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 6 mm
		Soldering tip chisel-shaped T39-DS52 Soldering tip shape: chisel-shaped / Head size: 5.2 x 0.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 6 mm
		Soldering tip conical, thin T39-I02 Soldering tip shape: tapered , thin / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 9.5 mm
		Soldering tip conical, thin T39-IL02 Soldering tip shape: tapered , thin / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 12.5 mm
		Soldering tip conical, thin T39-ILS015 Soldering tip shape: tapered , thin / Head size: 0.15 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 13.5 mm
		Soldering tip conical, bent T39-J02 Soldering tip shape: tapered , bent 30° / Head size: 0.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.0 mm
		Soldering tip conical, bent T39-JL02 Soldering tip shape: tapered , bent 30° / Head size: 0.2 mm / suitable soldering iron: FX 9701 / Length : 9.0 mm
		Soldering tip conical, bent T39-JS02 Soldering tip shape: tapered , bent 30° / Head size: 0.2 mm / suitable soldering iron: FX 9701 / Length : 8.0 mm
		Soldering tip conical, bent T39-JD08 Soldering tip shape: tapered , bent 30° / Head size: 0.8 mm / suitable soldering iron: FX 9701 / Length : 11.0 mm
		Soldering tip conical, bent T39-JD14 Soldering tip shape: tapered , bent 30° / Head size: 1.4 mm / suitable soldering iron: FX 9701 / Length : 6 mm
		Soldering tip conical, bent T39-JD16 Soldering tip shape: tapered , bent 30° / Head size: 1.6 mm / suitable soldering iron: FX 9701 / Length : 4.5 mm
		Soldering tip blade tip T39-K Soldering tip shape: blade tip , sloped 45° / Head size: 5.0 x 2.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 15 mm
		Soldering tip blade tip T39-KF Soldering tip shape: blade tip , sloped 45° / Head size: 5.0 x 2.4 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 15 mm
		Soldering tip blade tip T39-KL Soldering tip shape: blade tip , sloped 45° / Head size: 5.0 x 1.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.0 mm
		Soldering tip blade tip T39-KR Soldering tip shape: blade tip , sloped 45° / Head size: 5.0 x 1.5 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.0 mm
		Soldering tip blade tip T39-KU Soldering tip shape: blade tip , sloped 45° / Head size: 3.0 x 1.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.0 mm
		Soldering tip with slot T39-BCR1235 Soldering tip shape: special forme , straight / Head size: 3.5 x 2.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-BCR12 Soldering tip shape: special forme , straight / Head size: 1.2 x 0.4 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip with V groove T39-BCR16 Soldering tip shape: special forme , straight / Head size: 1.6 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip with V groove T39-BCR24 Soldering tip shape: special forme , straight / Head size: 2.4 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 11.5 mm
		Soldering tip with V groove T39-BCR32 Soldering tip shape: special forme , straight / Head size: 3.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-BCR4 Soldering tip shape: special forme , straight / Head size: 3.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-BCR52 Soldering tip shape: special forme , straight / Head size: 5.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR12 Soldering tip shape: chisel-shaped , straight / Head size: 1.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR16 Soldering tip shape: chisel-shaped , straight / Head size: 1.6 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR24 Soldering tip shape: pointed , straight / Head size: 2.4 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR32 Soldering tip shape: chisel-shaped , straight / Head size: 3.2 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR4 Soldering tip shape: chisel-shaped , straight / Head size: 4.0 mm / suitable soldering iron: FX 9701 / FX 9702 / Length : 10 mm
		Soldering tip with V groove T39-DR52 Soldering tip shape: chisel-shaped , straight / Head size: 5.2 mm / Length : 10 mm
		Soldering tip spatula T39-SP157 Soldering tip shape: spatula / Head size: 15.7 x 2.0 mm / suitable soldering iron: FX 9701 / Length : 9.5 mm
		Soldering tip spatula T39-SP212 Soldering tip shape: spatula / Head size: 21.2 x 2.0 mm / suitable soldering iron: FX 9701 / Length : 9.5 mm

67 Products

Product No.: HA-T39-BCR12

from 16,00 EUR

excl. 19% tax

to the product family

The image shows a soldering iron with a narrow, pointed metal tip and a non-slip, black handle. The handle has a textured surface for better grip.

Preview: The image shows a soldering iron with a narrow, pointed metal tip and a non-slip, black handle. The handle has a textured surface for better grip.

Preview: The image displays a pen-like tool with a metallic tip and a non-slip, black rubberized grip. It features a point and a connection for a device.

RTM soldering tips conical

		Soldering tip conical RTM 002 C Head size: 0.2 mm / Soldering tip shape: tapered / suitable soldering iron: WXMP / WMRP / Length : 20 mm
		Soldering tip conical RTM 008 C Head size: 0.8 mm / Soldering tip shape: tapered / suitable soldering iron: WMRP / WXMP / Length : 19 mm

2 Products

Product No.: 544.601.99

27,30 EUR

excl. 19% tax

to the product family

The image displays a technical drawing of a pen or tip with a conical end. It includes measurements and a side view that depict the shape and dimensions.

Preview: The image displays a technical drawing of a tool attachment. It features a conical shape with a pointed, narrow opening and detailed dimensions in millimeters.

Preview: The image displays technical drawings of a thin pen. It has a sharp, conical shape and a body that widens at one end. The dimensions are provided.

Preview: The image displays technical drawings of a pen. It features a sharp tip, a thick grip, and dimensions on one side. The drawings are shown in various views.

Preview: The image displays a technical drawing of a pen or tip with a conical end. It includes measurements and a side view that depict the shape and dimensions.

Preview: The image displays a technical drawing of an object, likely a tool. It includes multiple views: a side view, a top view, and a perspective with dimensions.

Preview: The image displays a technical diagram of an object with a conical end. It includes side views and dimensions in millimeters. The lines are clear and schematic.

Preview: The image displays technical drawings of soldering tips from various perspectives. Dimensions are provided that describe the shape and size of the tips, intended for use with QFP packages.

Preview: The image displays technical drawings of soldering cartridges for PLCC packages. Various views and dimensions are shown, explaining the shape and size of the component.

Preview: The image displays technical drawings of chip components. There is a side view of a component that is inserted into a circuit board, as well as dimensions in millimeters.

Preview: The image displays technical drawings of chip components. Various shapes and sizes are depicted, including a cylindrical or rectangular element and a circuit board with components. Dimensions are provided.

Preview: The image displays a technical drawing of chip components on a circuit board. It includes dimensions and a depiction of a connection, along with detailed views of the components.

Preview: The image shows a technical drawing of components on a circuit board. There are several small components arranged on a green board piece, with dimensions in mm and inches.

Preview: The image shows a technical drawing of a thin, pointed tool with a conical attachment. Dimensions for length and diameter are provided.

Preview: The image shows a technical drawing of a sharp object, possibly a pen or tool. It includes dimensions and a detailed view of the tip.

Preview: The image displays a technical drawing of a sharp, cylindrical object with dimensions. It features a conical head and a narrow, elongated shape.

Preview: The image displays a technical drawing of a pen. The tip is shown at the top in various views. Dimensions and details are provided in millimeters.

Preview: The image displays a sharp, cylindrical object with a narrow end. It has a thicker base and is likely a tool or a tip. Dimensions are shown in millimeters.

Preview: The image shows a technical drawing of a sharp tip with an additional tinned area. It is slender and has a rounded base. Dimensions are also provided.

Preview: The image displays technical drawings of cartridges for plastic rivets. Dimensions and volume are provided, with a focus on the design and structure of the cartridges.

Preview: The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. It includes dimensions and a representation of the rivet volume.

Preview: The image displays technical drawings with dimensions for cartridges with a chromatic surface, used in plastic engineering. There is a groove design and a green block.

Preview: The image shows a technical drawing of a sharp object with a diameter of 3.5 mm, a length of 10.5 mm, and a 60-degree angle at the tip.

Preview: The image shows a technical drawing of a tool with an elongated body and a pointed, angled edge. Dimensions are provided, including lengths and diameters in millimeters.

Preview: The image shows a technical drawing of a specialized tool with a pointed tip. It features a thin, nickel-plated area and specifications for diameter and length.

Preview: The image displays technical drawings of a component, likely a connector. There are various views and dimensions, the shape is slim and cylindrical with different ends.

Preview: The image shows a technical drawing of a special iron-coated tip for robots. The tip has a wedge-shaped edge and is shown in two views: side and top.

Preview: The image displays technical drawings of a special pen with various tip shapes. The dimensions are provided in millimeters, highlighted by dimension lines.

Preview: The image displays a technical drawing draft of an object with a conical tip, a diameter of 3 mm, and varying lengths. Dimensions are specified precisely.

Preview: The image displays a technical drawing of a tool with a conical, chrome-plated head, suitable for processing plastics. Dimensions are provided.

Preview: The image displays technical drawings of a fastener sketch with two views (A and B). It includes dimensions and details for soldering pins in a connector.

Preview: The image displays technical drawings of a special soldering cartridge. It includes dimensions in millimeters and inches, as well as the shape of the cartridge with a round end and a wider middle.

Preview: The image displays a technical drawing of a cable soldering tool. It includes various views and dimensions of the tip used for soldering cables.

Preview: The image displays technical drawings of a Teflon-coated pen. It includes views from the side, top, and bottom, with measurements. The pen has a pointed shape.

Preview: The image shows technical drawings of a small tool, likely a needle or a probe. It includes dimensions and views from various perspectives.

Preview: The image shows a technical drawing of an object that looks like a sharp nozzle. It has a cylindrical body with a narrow end and is dimensioned. Various views are depicted.

Preview: The image displays a technical drawing of cassettes with a chrome-plated surface, designed for the use of plastic rivets. Dimensions are visible.

Preview: The image shows a technical drawing of a tool with rounded ends and precise measurements. It is intended for plastic riveting pliers and has a chrome-plated surface.

Preview: The image shows a technical drawing of a tool with a pointed end, a cylindrical handle, and measurements. Various views of the tool are depicted.

Preview: The image shows a technical drawing of a micro tactile switch from Panasonic. It includes different views of the switch and dimensions in millimeters.

Preview: The image displays a technical drawing of a cutting cartridge for rubber and plastic. It includes dimensions and a schematic representation that clarifies the shape and application of the cartridge.

Preview: The image displays a technical drawing of a connector. At the top is the plug with dimensions, followed by a circuit board with components below. Measurements are provided in both mm and inches.

Preview: The image shows a technical drawing of a pen. It has a pointed tip and a cylindrical casing. Dimensions in millimeters are indicated on the longitudinal side.

Preview: The image shows a technical drawing of a tool, consisting of a long, narrow handle and a pointed, conical tip. The dimensions are provided.

Preview: The image displays a technical drawing of a component with dimensions. It consists of a rectangular base with a long, narrow connector that is mounted on a circuit board.

Preview: The image displays technical drawings of an electronic component with a cylindrical connector, a small green package, and precise measurements in millimeters.

Preview: The image displays technical drawings of a DUAL IN LINE connector. Dimensions in mm are provided, showing the sizes of both the connector and the circuit board. The connector has a cylindrical shape and is attached to a circuit board.

Preview: The image shows a technical drawing of a dual in-line component with dimensions. It includes a connector seated on a circuit board and is shown in two views.

Preview: The image displays technical drawings of a cartridge for QFP and PLCC cases. Dimensions are provided in millimeters, as well as the shape of the cartridge and a green chip.

Preview: The image displays a technical drawing of a cartridge system for QFP and PLCC packages, with dimensions and a side view. A wire connects the cartridge to a control surface.

Preview: The image shows a technical drawing of a component with various dimensions. At the top, there is a casing visible, which sits on a green PCB, and below it, there is a tool connected by cables.

Preview: The image displays a technical drawing of a cartridge for QFP and PLCC packages. It shows dimensions and the shape of the device. A detail indicates the connection and the dimensions.

Preview: The image displays a technical drawing of a container for QFP and PLCC packages. It includes dimensions in millimeters and inches, as well as a schematic connection.

Preview: The image displays technical drawings of PLCC sockets. The top shows dimensions and a square component with 44 contact points. An additional cable is also illustrated.

Preview: The image displays technical drawings of PLCC cartridges. At the top are two views of a square connector with 32 contact positions. Below there is a description with dimensions in mm and inches.

Preview: The image displays technical drawings of a connector. At the top, dimensions and a 3D representation of the plug are visible. Below, there is a top view of the circuit board with connection.

Preview: The image displays a technical diagram of a pen with a conical tip. Dimensions are provided: diameter and length measurements in millimeters. The view is shown from both the front and the side.

Preview: The image shows a technical drawing of a precise tool with a long, narrow handle and a targeted, curved tip. Dimensions are indicated.

Preview: The image displays a technical drawing of a device with a curved end and a straight body. The dimensions are provided, including diameter and length.

Preview: The image displays technical drawings of a tool with a pointed end. There are front, side, and detailed views. Dimensions are provided. The shape is ergonomic.

Preview: The image displays technical drawings of a special soldering tip. It has a pointed, narrow shape and is used for quick soldering. Dimensions are provided in millimeters.

Preview: The image displays technical drawings of soldering tips. One tip has a conical shape with a large contact area. The dimensions are provided, including a detailed sectional view and a top view.

Preview: The image displays technical drawings of a component called

Preview: The image displays technical drawings of a component with various views and dimensions. It features a dual-in-line package with a connector and a chip on a circuit board.

Preview: The image displays a technical drawing of a dual in-line package with dimensions. It shows a marked component seated on a green circuit board, and a connecting wire.

Preview: The image shows technical drawings of a

Preview: The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. Dimensions and views from various perspectives are shown.

Preview: The image displays technical drawings of chrome coatings for special tools. Various views of an attachment designed for plastic rivets are depicted.

Preview: The image displays technical drawings of two cartridges with a chrome-colored surface. They are designed for use with plastic rivets. Dimensions are provided.

Preview: The image displays technical drawings of a cartridge for QFP and PLCC packages. It includes dimensions and details of a square base with a structure mounted on it and a thin cable.

Preview: The image shows a pen with a conical tip. There is a side view, a top view, and a detailed view of the tip. The dimensions are given in millimeters.

Preview: The image shows a technical drawing of a pen. It has a conical shape with a pointed, white tip. Dimensions such as diameter and length are provided.

Preview: The image shows a pencil. It has a conical tip, a round shaft, and measures 12 x 0.7 mm. Side view and top view are also shown.

Preview: The image displays a technical drawing of a pen. It has a pointed, conical shape and a labeled area with dimensions that specify lengths and diameters.

Preview: The image displays technical drawings of a curved instrument with a thin, pointed tip. There are measurements in millimeters that describe the size and shape of the object.

Preview: The image shows a technical component with a curved end, which has a cylindrical shape. There are dimensions and a side view of the object. The structure appears smooth and symmetrical.

Preview: The image displays technical drawings of a component. On the left, dimensions are provided, and on the right, a schematic representation shows the connection to a circuit board. An arrow indicates the movement or position.

Preview: The image displays technical drawings of a component. At the top, dimensions and sketches of a head are shown. Below, a wire leads to a circuit board with contact points.

Preview: The image displays technical drawings of a component with various views and dimensions. There are a top view, side views, and closer detailed views.

Preview: The image displays technical drawings of a component with various views and dimensions. Details such as diameter, lengths, and an assembly position on a circuit board are shown.

Preview: The image shows a technical drawing of a pen. It has a pointed tip, a round body, and is shown from various sides with dimensions.

Preview: The image displays a technical drawing of a chisel attachment. It has a conical shape with a flat tip. Dimensions are provided: length 13.5 mm and width 4.8 mm.

Preview: The image shows a technical drawing of a pointed object, possibly a tool. There is a side view, a top view, and a connection that includes dimensions.

Preview: The image displays a technical drawing of a pen with a pointed cap. Dimensions are provided in millimeters. The pen has a slim, elongated shape.

Preview: The image shows a technical drawing of a rework knife. It is a detailed representation with dimensions in mm and a marking on the handle. The blade head is flat and has a special shape.

Preview: The image displays a technical drawing of a pen. It features a pointed tip, a slim body, and a cap. Dimensions are provided in millimeters.

Preview: The image displays technical drawings of a thin, diagonally cut tool with a cylindrical handle. Dimensions are provided to clarify the size and shape.

Preview: The image displays a technical drawing of a pen. The view includes the tip, the shaft, and dimensions such as diameter and length. The pen has a conical shape and is rounded at the top.

Preview: The image shows a technical drawing of a sharp object with a cylindrical body and a narrow tip. It includes dimensions and a top view.

Preview: The image shows a technical drawing of a tool attachment with a pointed end, displayed in multiple perspectives. Dimensions are provided.

Preview: The image shows a technical drawing of a slender, conical tool with a long, thin handle and a pointed working surface. Dimensions are indicated.

Preview: The image displays technical drawings of connectors. In the top right, there is a plug that is inserted into a circuit board, with dimensions and various diameters.

Preview: The image displays a technical drawing of a tool blade. It includes various views, dimensions, and a description of the blade type, along with a detailed sketch.

Preview: The image shows a technical drawing of a connector. Dimensions are provided. On the right, the plug is depicted on a green circuit board, with various connections.

Preview: The image displays technical drawings of a tool or tip. The top left shows dimensions. Below, the tip is seen with a tapered round connection.

Preview: The image shows a technical drawing of an object, likely a pen or tool. It includes side views and dimensions in millimeters, with a curved handle and a pointed tip.

Preview: The image displays technical drawings of a component that has a conical shape and features a narrow slot on one side. Dimensions and labels are provided.

Preview: The image displays technical drawings of a component. It has a cylindrical shape with an elongated, slotted opening at one end. Dimensions are provided, including lengths and diameters.

Preview: The image displays technical drawings of a tool with various views. It features a conical tip and an elongated shape, with dimensions in millimeters.

Preview: The image displays technical diagrams of a component with multiple views. Various dimensions are provided, and a part is highlighted in blue. It is a precise technical drawing.

Preview: The image displays technical drawings of a device with a curved end that has a tip. Dimensions are provided in millimeters and inches to clarify the size and shape.

Preview: The image displays technical drawings of a cylindrical object with a rounded tip. It includes dimensions and a side view that clarifies the shape.

Preview: The image displays technical drawings of a component from various viewing perspectives. It includes dimensions in millimeters and a detailed view of the shape and structure.

Preview: The image displays technical drawings of a tip. It consists of two views: one from the top and one from the side. Additionally, a circuit board with several pins is depicted. Dimensions are provided.

Preview: The image displays a technical drawing of a tool attachment. Various views with dimensions are shown at the top. The attachment has a flat tip and a round handle.

Preview: The image displays technical drawings of a conical object with a tip. Dimensions are provided, including diameter and angle. There is a side view and a top view.

Preview: The image displays technical drawings of a pointed object, likely a pen or tool, with specifications for length and diameter. Three views are depicted.

Preview: The image displays technical drawings of a device with a sharp, conical tip in the foreground. On the left side, dimensions are given in millimeters, while the overall shape is cylindrical.

Preview: The image displays technical drawings of connection plugs and pins. Dimensions are provided that clarify the distances and diameters of the pins. A part is enlarged.

Preview: The image displays technical drawings of a pure nickel soldering tip attachment. The tip has a conical shape, with precise dimensions and a part number on the shaft.

Preview: The image shows a technical drawing of a pen. Various views are displayed: the tip, the casing, and the dimensions. The dimensions are given in millimeters and inches.

Preview: The image displays a technical drawing of a pen with a conical tip. It has a cylindrical shape and features various dimensions that are specified.

Preview: The image displays technical drawings of a tool attachment. It features a conical shape with dimensions and labeling. There is a top view and a side view.

Preview: The image displays a technical drawing of a tool head. It features a wide, flat blade with a round handle. Dimensions are provided in millimeters: length 37 mm, width 10 mm.

Preview: The image displays technical drawings of a component with various views. There are dimensions in millimeters and a sectional view. One side is marked as

Preview: The image displays technical drawings with dimensions of a component. There is a side view, a top view of a green base with two pins, and a detailed view of a tool.

Preview: The image displays a technical drawing of a pen with a pointed end. It has a cylindrical shape, with a description of the dimensions and details that clarify the size and shape.

Preview: The image shows a technical drawing of a tool attachment with a sharp, curved shape. Dimensions in millimeters are provided, describing the dimensions of the attachment.

Preview: The image displays a technical drawing of a marker pen. The top shows the tip view and the side view, with dimensions. Below, the length of the pen is visible.

Preview: The image displays technical drawings of a device. There are a side view, a top view, and an end view. The device has a tapered shape and is thinner in the middle. Dimensions are provided.

Preview: The image shows a technical drawing of a tool. It has a conical head with a wide tip and an elongated handle. Dimensions and designation are provided.

Preview: The image displays a technical drawing of a tool attachment. The top shows the front view and the top view, the middle features the entire attachment, and the bottom provides a detailed view of the tip. Dimensions are provided.

Preview: The image shows a technical drawing draft of an object with a sharp, conical shape. Dimensions are provided in millimeters. The body is cylindrical and has a smooth surface.

Preview: The image displays a technical drawing of a tool with three viewing perspectives: front, side, and top view. It features a slender shape and ends with a pointed tip. Dimensions are included.

Preview: The image shows a technical drawing of a pen with a conical tip. Dimensions are given in millimeters. The pen has a round, ergonomic body and a fine, pointed writing lead.

Preview: The image displays a technical drawing of a tool attachment with a curved end. Dimensions and details of the design are shown, including a sketch of the main part and the tip area.

Preview: The image displays technical drawings of a special tool. It features a curved handle and a pointed, narrow working surface. Dimensions are provided in millimeters.

Preview: The image shows technical drawings of a tool attachment with a curved end. It includes dimensions in mm and inches as well as a side and a top view.

Preview: The image displays a technical drawing of a cylindrical object with a rounded end. Dimensions are provided, and the object features a straight, narrow connector. The representation is three-dimensional.

Preview: The image displays technical drawings of a tool with a narrow, curved tip and a cylindrical handle. Dimensions are also provided, both in millimeters and inches.

Preview: The image displays a technical drawing of a tool with a sharp, conical tip. Dimensions and details are provided on the drawing that explain the shape and size of the tool.

Preview: The image displays a technical drawing of an instrument. It features a cylindrical handle and a pointed, flat blade. Dimensions are provided to clarify the size.

Preview: The image displays a narrow object with a conical end and a flat, rounded head. Dimensions are provided in millimeters, along with a part designation on the side.

Preview: The image displays a graphic design of a pen with a round tip. Three views are presented: front view, side view, and top view. Dimensions are provided.

Preview: The image displays a technical drawing of a tool sheet with dimensions. It shows a flat blade with a handle attached on one side.

Preview: The image shows a technical drawing of a measuring device with a flat blade attachment. It includes dimensions and views of the attachment as well as the handle. Sketches are presented in a precise, schematic representation.

Preview: The image displays a technical drawing of a precise, narrow tool with a conical tip. The body is long and cylindrical, with measurements in millimeters and inches.

Preview: The image shows a technical drawing of a sharp object, apparently a needle or a similar tool. There are three views: the side view, the top view, and a close-up of the tip area. Dimensions are provided.

Preview: The image displays a technical drawing of a mini-spoon attachment. The attachment features an oval opening and is mounted on a cylindrical handle. Dimensions are labeled.

Preview: The image displays technical drawings of an object, likely a pen or tool. There are views from the side, top, and a detailed view. Dimensions are provided.

Preview: The image displays various views of a precise, sharp tool or attachment with ????? dimensions. The attachment has a narrow, conical shape and is made of a solid material.

Preview: The image shows a technical drawing of a conical object with precise dimensions. It has a pointed shape, is thicker at the top, and tapers towards the bottom. Dimensions are provided in millimeters.

Preview: The image displays a technical drawing of a small spoon tip. It features an oval opening and measures approximately 10.5 mm in width and 3.8 mm in height.

Preview: The image displays various views of a sharp, angled tip. There are measurements for the length and diameter, as well as a detailed representation of the shape.

Preview: The image shows a technical pen from various perspectives. The pen has a conical tip and a round body. There is a model number on the body. Dimensions are provided.

Preview: The image shows a technical drawing of a pen. It features a sharp, conical tip and an elongated body. Dimensions and labels are included.

Preview: The image displays technical drawings of a tool from various perspectives. It features a round handle and a pointed, angled tip for precise applications. Dimensions are provided.

Preview: The image shows different views of an angled tip tool. It includes measurements for diameter and length, as well as a detailed view of the tip. The shapes are technical and precise.

Preview: The image displays technical drawings of a sharp, elongated object with a conically tapered tip. Dimensions in millimeters are provided, illustrating the size and shape of the object.

Preview: The image displays various views of the angled tips of a tool. It includes measurements for diameter and length, as well as a representation of the tip and the handle.

Preview: The image shows a technical drawing of an object with a tapered end and a cylindrical body. Dimensions in millimeters are provided, including diameter and length.

Preview: The image displays a technical drawing of a fine nozzle tool. It features a conical head with a narrow opening and a cylindrical handle. Dimensions are provided.

Preview: The image displays a technical drawing of a thin, curved instrument with a slender handle. Dimensions are provided that indicate the diameter and length of the tool.

Preview: The image shows a technical drawing of a

Preview: The image shows a technical drawing of an object with a rounded end, an elongated shape in the middle, and various views including dimensions in millimeters.

Preview: The image shows a technical drawing of a square sensor with a tube adjoining a square base. It includes measurements in millimeters.

JBC Soldering tips for T245

		Soldering tip C245-741 Head size: 2.4 x 0.6 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-903 Head size: 1.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Soldering tip C245-906 Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-907 Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-944 Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-001 Head size: 0.6 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
		Gullwing tip C245-009 Head size: 4.5 x 1.8 mm / Soldering tip shape: gullwing , straight / suitable soldering iron: T245
		Gullwing tip C245-010 Head size: 4.5 x 1.8 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
		SMD desoldering tip C245-016 Head size: 0.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-017 Head size: 2.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-018 Head size: 3.4 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-019 Head size: 4.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-029 Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
		Soldering tip C245-030 Head size: 0.3 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
		Soldering tip C245-032 Head size: 0.4 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
		Soldering tip C245-034 Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
		Soldering tip C245-036 Head size: 0.5 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
		Special soldering tip C245-041 Head size: 1.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Special soldering tip C245-052 Head size: 6.0 x 4.9 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-053 Head size: 5.0 x 3.8 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-054 Head size: 7.0 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-056 Head size: 3.4 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-061 Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: T245
		Soldering tip C245-064 Head size: 1.3 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Gullwing tip C245-067 Head size: 2.3 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
		Soldering tip C245-069 Head size: 5.0 x 1.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-102 Head size: 2.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-107 Head size: 3.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Special soldering tip C245-109 Head size: 4.3 x 0.1 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-116 Head size: 3.0 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
		Special soldering tip C245-117 Head size: 1.45 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD Special soldering tip C245-118 Head size: 2.5 x 0.8 mm / Soldering tip shape: special forme / suitable soldering iron: T245
		Soldering tip C245-119 Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
		Special soldering tip C245-121 Head size: 13.0 x 0.65 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-122 Head size: 1.5 x 0.5 mm / Soldering tip shape: special forme / suitable soldering iron: T245
		Special soldering tip C245-123 Head size: 4.0 x 4.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-124 Head size: 4.25 x 2.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-126 Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
		SMD desoldering tip C245-136 Head size: 7.1 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD Special soldering tip C245-138 Head size: 12.0 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
		SMD Special desoldering tip C245-150 Head size: 2.3 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-201 Head size: 0.6 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
		Soldering tip C245-234 Soldering tip shape: pointed , bent / suitable soldering iron: T245
		SMD desoldering tip C245-215 Head size: 18.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-220 Head size: 6.0 x 5.4 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-221 suitable soldering iron: T245
		SMD desoldering tip C245-222 suitable soldering iron: T245
		SMD desoldering tip C245-223 suitable soldering iron: T245
		SMD desoldering tip C245-224 suitable soldering iron: T245
		SMD desoldering tip C245-226 suitable soldering iron: T245
		SMD desoldering tip C245-227 suitable soldering iron: T245
		SMD desoldering tip C245-228 suitable soldering iron: T245
		SMD desoldering tip C245-247 suitable soldering iron: T245
		SMD desoldering tip C245-248 suitable soldering iron: T245
		SMD desoldering tip C245-250 suitable soldering iron: T245
		Soldering tip C245-256 Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-259 Soldering tip shape: round , bent / suitable soldering iron: T245
		Soldering tip C245-260 Soldering tip shape: round , bent / suitable soldering iron: T245
		Soldering tip C245-261 Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-268 Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-301 Head size: 8.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		SMD desoldering tip C245-303 Head size: 6.5 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-304 Head size: 15.0 x 9.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-305 Head size: 12.0 x 9.6 mm / Soldering tip shape: special forme / suitable soldering iron: T245
		SMD desoldering tip C245-306 Head size: 10.0 x 9.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-311 Head size: 20-0 x 6.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-312 Head size: 3.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-313 Head size: 4.1 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		SMD desoldering tip C245-315 Head size: 15.0 x 15.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-403 Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
		Soldering tip C245-405 Head size: 1.5 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-406 Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-407 Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-627 Head size: 3.0 mm / Soldering tip shape: tapered , bent / suitable soldering iron: T245
		Soldering tip C245-628 Head size: 4.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
		Special soldering tip C245-651 Head size: 4.0 x 3.25 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-654 Head size: 3.5 x 2.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-667 Head size: 4.0 x 3.25 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-669 Head size: 3.5 x 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-673 Head size: 0.8 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-708 Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-710 Head size: 1.2 mm / Soldering tip shape: tapered , sloped / suitable soldering iron: T245
		Soldering tip C245-729 Head size: 2.7 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		SMD special soldering tip C245-730 Head size: 10.0 x 1.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-731 Head size: 0.6 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-732 Head size: 3.2 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Soldering tip C245-742 Head size: 0.8 x 0.6 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-747 Head size: 0.6 mm / Soldering tip shape: tapered , sloped / suitable soldering iron: T245
		Special soldering tip C245-748 Head size: 0.6 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Special soldering tip C245-749 Head size: 0.6 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Special soldering tip C245-751 Head size: 4.0 x 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-752 Head size: 15.0 x 2.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
		Special soldering tip C245-754 Head size: 3.5 x 2.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-755 Head size: 4.0 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-756 Head size: 4.8 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-757 Head size: 3.2 x 1.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Special soldering tip C245-758 Head size: 4.3 x 2.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-759 Head size: 2.4 x 0.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-760 Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-761 Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Special soldering tip C245-762 Head size: 6.7 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-763 Head size: 4.0 x 2.5 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Special soldering tip C245-764 Head size: 0.5 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
		Soldering tip C245-765 Head size: 6.0 x 0.4 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: T245
		Soldering tip C245-766 Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-768 Head size: 1.5 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-770 Head size: 2.4 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-771 Head size: 0.1 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Special soldering tip C245-772 Head size: 1.4 x 0.7 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
		Soldering tip C245-773 Head size: 0.8 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-774 Head size: 1.2 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-775 Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Special soldering tip C245-776 Head size: 37.0 x 2.4 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
		Soldering tip C245-784 Head size: 2.8 mm / Soldering tip shape: sloped , tapered / suitable soldering iron: T245
		Soldering tip C245-785 Head size: 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
		Soldering tip C245-803 Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
		Soldering tip C245-804 Head size: 1.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
		Soldering tip C245-806 Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-807 Head size: 2.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-808 Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-811 Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-812 Head size: 3.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-844 Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-845 Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-846 Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Soldering tip C245-862 Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Soldering tip C245-863 Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Soldering tip C245-866 Head size: 6.6 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-904 Head size: 1.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
		Soldering tip C245-905 Head size: 1.5 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-908 Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-911 Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Soldering tip C245-912 Head size: 3.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		SMD Soldering tip C245-913 Head size: 21.0 x 2.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
		SMD Soldering tip C245-914 Head size: 10.0 x 2.4 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
		Soldering tip C245-929 Head size: 0.6 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
		Soldering tip C245-930 Head size: 0.5 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
		Gullwing tip C245-931 Head size: 2.7 mm / Soldering tip shape: gullwing , sloped / suitable soldering iron: T245
		Soldering tip C245-933 Head size: 2.2 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Soldering tip C245-935 Head size: 0.8 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
		Soldering tip C245-937 Head size: 0.6 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
		Gullwing tip C245-938 Head size: 3.8 mm / Soldering tip shape: gullwing , sloped / suitable soldering iron: T245
		Soldering tip C245-939 Head size: 6.0 x 0.4 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: T245
		Soldering tip C245-943 Head size: 1.7 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Soldering tip C245-945 Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-946 Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		SMD Soldering tip C245-949 Head size: 32.0 x 0.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
		Soldering tip C245-951 Head size: 3.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
		Soldering tip C245-955 Head size: 13.0 x 0.5 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
		Soldering tip C245-957 Head size: 0.8 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
		Soldering tip C245-962 Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Soldering tip C245-963 Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
		Gullwing tip C245-965 Head size: 1.9 mm / Soldering tip shape: gullwing / suitable soldering iron: T245
		Soldering tip C245-966 Head size: 6.6 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
		Solder pot tip C245-SP01 Head size: 18.0 x 10.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245

155 Products

Product No.: JBC-C245-907

from 28,00 EUR

excl. 19% tax

to the product family

The image shows a tool with a silver, conically shaped end and a rubberized, non-slip grip. It has a slender shape and a side blade.

Preview: The image shows a tool with a silver, conically shaped end and a rubberized, non-slip grip. It has a slender shape and a side blade.

Preview: The image shows a screwdriver with a non-slip, rubberized handle and a narrow, metallic blade. The handle surface has a wavy pattern for better grip.

Preview: The image shows a gray tool handle with a ridged rubber surface. At one end, there is a flat screwdriver. The handle is oval and ends in a point.

Preview: The image shows a tool that looks like a narrow pen. It has a rubberized grip with grooves for better hold and a pointed, metal working surface at the front.

Preview: The image shows a screwdriver with a long, narrow metal tip and a rubberized, ergonomic handle. The handle has a textured surface for better grip.

Preview: The image shows a writing instrument with a slender, metallic tip and a rubberized grip. The grip is black with grooves and the tip is pointed and silver.

RTM Chisel-shaped tip

		Soldering tip chisel-shaped RTM 013 S Head size: 1.3 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 20 mm
		Soldering tip chisel-shaped RTM 015 S Head size: 1.5 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 19 mm
		Soldering tip chisel-shaped RTM 022 S Head size: 2.2 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 19 mm
		Soldering tip chisel-shaped RTM 008 S Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 24 mm
		Soldering tip chisel-shaped RTM 036 S Head size: 3.6 x 0.9 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 19 mm
		Soldering tip chisel-shaped RTM 004 S Head size: 0.4 x 0.15 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WMRP / WXMP / Length : 20 mm

6 Products

Product No.: 544.603.99

from 27,30 EUR

excl. 19% tax

to the product family

The image displays a conical, metallically shiny object with a rounded tip. The lower half is gray, providing a matte contrast to the smooth, silver upper part.

Preview: The image shows a silver, conically shaped metal nail with a flat head. The tip is slightly darkened, and the body has a smooth surface.

Preview: The image shows a conical, metallic object that is wider on one side and tapers to a point on the other. The surface is smooth and has a slightly shiny silver tone.

Preview: The image displays a conical, metallically shiny object with a rounded tip. The lower half is gray, providing a matte contrast to the smooth, silver upper part.

Preview: The image displays a metallic cone with a sharp tip and a wider base. The surface is shiny and reflects light. It is a simple, elegant object.

Preview: The image shows a metal pin with a pointed, angled front and a flat, round head. It is silver-colored and has a smooth surface that reflects light.

LT Soldering tip chisel-shaped

		Soldering tip chisel-shaped LT H Soldering tip size (head): 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped LT H Soldering tip size (head): 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped LT A Soldering tip size (head): 1.6 x 0.7 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped LT A Soldering tip size (head): 1.6 x 0.7 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped LT B Soldering tip size (head): 2.4 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped LT B Soldering tip size (head): 2.4 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped LT C Soldering tip size (head): 3.2 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped LT C Soldering tip size (head): 3.2 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped LT D Soldering tip size (head): 4.6 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped LT D Soldering tip size (head): 4.6 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece

10 Products

Product No.: 544.405.99

from 5,20 EUR

excl. 19% tax

to the product family

The image shows a metallic pointed cone that is wider at the base and tapers towards the top. The surface is shiny and reflects light, giving it a smooth appearance.

LT Soldering tip round sloped

		Soldering tip round sloped LT F Soldering tip size (head): 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		XNT Soldering tip round sloped LT F Soldering tip size (head): 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece

2 Products

Product No.: 544.408.10

from 5,20 EUR

excl. 19% tax

to the product family

The image shows an electrical switch with two long metal guides. The switch has a rubberized surface and a rotary knob that can be set to the position

Soldering tip RTW 2

Head size: 0.7 x 0.4 mm / Soldering tip shape: bent 45° / suitable soldering iron: WXMT / WMRT / Length : 22 mm

RTW 2 pair of soldering tips 0.7 x 0.4 mm, 45 °
(suitable for WMRT)

Product No.: 544.652.99

60,30 EUR

excl. 19% tax

Show product

The image shows a conical metal pin with a rounded tip. It has a flat, wide head and a smooth, silver surface.

LT Gullwing tip

		Solder deposit tip LT GW Soldering tip size (head): 3.2 mm / Soldering tip shape: gullwing / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: individually / Package size: 1 piece
		Solder deposit tip LT GW Soldering tip size (head): 3.2 mm / Soldering tip shape: gullwing / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: loose / Package size: 10 piece

2 Products

Product No.: 544.410.10

from 6,10 EUR

excl. 19% tax

to the product family

The image depicts a conical, silver metal object. It has a wide, flat base and tapers to a point at the top. The surface appears smooth and shiny.

Preview: The image depicts a conical, silver metal object. It has a wide, flat base and tapers to a point at the top. The surface appears smooth and shiny.

Preview: The image shows a conical metal object with a pointed, sharply tapering tip and a wider, round base. It is silvery and shiny. The object is lying at an angle on a white surface.

Preview: The image shows a conical, metallic object with a pointed shape. The surface shines silver, while the tip has a matte, gray color.

Preview: The image shows a small, conical metal pin. It has a smooth, silver surface and a wider base. The tip is rounded and slightly recessed.

LT Soldering tip round

		Soldering tip round LT 1 Soldering tip size (head): 0.25 mm / Soldering tip shape: round / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip round LT 1 Soldering tip size (head): 0.25 mm / Soldering tip shape: round / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece
		Soldering tip round LT 1A Soldering tip size (head): 0.5 mm / Soldering tip shape: round / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip round LT AS Soldering tip size (head): 1.6 mm / Soldering tip shape: round / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
		Soldering tip round LT CS Soldering tip size (head): 3.2 mm / Soldering tip shape: round / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece

5 Products

Product No.: 544.435.10

from 5,20 EUR

excl. 19% tax

to the product family

The image shows a conical, silver-colored metal object. It has a wide, flat base and tapers to a point at the top. The surface is smooth and shiny.

Preview: The image shows a conical, silver-colored metal object. It has a wide, flat base and tapers to a point at the top. The surface is smooth and shiny.

Preview: The image shows a tapered, silver metal object with a flat base on one side. The other side is narrow and pointed, suitable for precise applications.

Preview: The image shows a conical, metallic drill bit. It tapers to a point at one end, while the other end has a wide base. The surface is shiny and silver.

LT Soldering tip chisel-shaped long

		Soldering tip chisel-shaped long LT K Soldering tip size (head): 1.2 x 0.4 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: WP 80 / FE 75 / Length : 20 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped long LT K Soldering tip size (head): 1.2 x 0.4 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: WP 80 / FE 75 / Length : 20 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped long LT L Soldering tip size (head): 2.0 x 1.0 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: WP 80 / FE 75 / Length : 20 mm / Packing: individually / Package size: 1 piece
		Soldering tip chisel-shaped long LT L Soldering tip size (head): 2.0 x 1.0 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: WP 80 / FE 75 / Length : 20 mm / Packing: loose / Package size: 10 piece
		Soldering tip chisel-shaped long LT M Soldering tip size (head): 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: WP 80 / FE 75 / Length : 20 mm / Packing: individually / Package size: 1 piece

5 Products

Product No.: 544.438.99

from 5,20 EUR

excl. 19% tax

to the product family

The image shows a technical illustration of a circuit board with several components. Individual parts are enlarged, and a tool is displayed in various views. Dimensions are provided.

Preview: The image displays a technical illustration of soldering tips targeting a circuit board. Details of the tips and the PCB are highlighted. Dimensions are provided.

Preview: The image displays a technical drawing of an electrical component. On the right side, there is a circuit board with four connections. On the left are side views of the component, including dimensions.

Preview: The image shows a technical drawing of a hand tool with a curved end for manipulating electronic components on a green circuit board. Dimensions are provided.

Preview: The image displays technical drawings of a component on a circuit board. It includes various views of the component, along with dimensions in millimeters.

Preview: The image displays technical drawings of two tool tips, C120007 and C120008, as well as a green circuit board with four black components. Dimensions are provided.

Preview: The image displays technical drawings of two components on a circuit board. Next to the board, dimensions and reference numbers of the components are depicted.

Preview: The image shows a technical drawing of soldering tips. Two pointed tools are depicted above a circuit board with various small components. Side views and dimensions are provided.

Preview: The image displays a technical drawing of a conical end piece with dimensions. There is a side view and a top view, both showing the end piece with a nozzle area and a thin cable.

Preview: The image shows a technical drawing. A tool with a fine tip is depicted. Additionally, two pliers targeting a circuit board with small rectangular components are shown. Dimensions are provided.

Preview: The image displays a technical drawing of a soldering iron with a special tip. Additionally, details of a circuit board with electronic components are shown. Dimensions and labels are also visible.

Preview: The image shows a technical illustration of a circuit board with several components. Individual parts are enlarged, and a tool is displayed in various views. Dimensions are provided.

JBC Soldering tips C120 for PA120

		Soldering tip C120-001 Head size: 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
		Soldering tip C120-003 Head size: 3.0 x 0.7 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: PA120
		Soldering tip C120-004 Head size: 0.7 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
		Soldering tip C120-005 Head size: 5.0 x 0.7 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: PA120
		Soldering tip C120-007 right Head size: 3.5 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
		Soldering tip C120-008 left Head size: 3.5 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
		Soldering tip C120-009 right Head size: 6.0 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
		Soldering tip C120-010 left Head size: 6.0 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
		Soldering tip C120-011 Head size: 0.6 x 0.3 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: PA120
		Soldering tip C120-012 Head size: 0.7 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
		Soldering tip Head size: 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
		Soldering tip Head size: 0.5 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
		Soldering tip Head size: 0.3 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120

13 Products

Product No.: JBC-C120-902

from 39,00 EUR

excl. 19% tax

to the product family

1 to 16 (from a total of 125)

Soldering and desoldering tips

Factors restricting the service life of tips

Our Brands

Any questions?

Your sales team