The image shows a soldering iron tip with a metallic handle. The handle has a non-slip, black rubber coating and ends in a sharp, long, metallic tip.
The image displays a technical drawing with dimensions. There is an elongated shape that tapers to a point at one end. Measurements are provided in millimeters.
The image shows a silver 3.5 mm jack plug with a non-slip, black rubber coating. The plug has three contact strips and is slightly conical in shape.
Preview: The image shows a soldering iron tip with a metallic handle. The handle has a non-slip, black rubber coating and ends in a sharp, long, metallic tip.
Preview: The image displays a technical drawing with dimensions. There is an elongated shape that tapers to a point at one end. Measurements are provided in millimeters.
Preview: The image shows a silver 3.5 mm jack plug with a non-slip, black rubber coating. The plug has three contact strips and is slightly conical in shape.
Soldering tip round sloped RTP 012 B MS
(Product No.: 501.020.99)
The image shows a soldering iron tip with a metallic handle. The handle has a non-slip, black rubber coating and ends in a sharp, long, metallic tip.
The image displays a technical drawing with dimensions. There is an elongated shape that tapers to a point at one end. Measurements are provided in millimeters.
The image shows a silver 3.5 mm jack plug with a non-slip, black rubber coating. The plug has three contact strips and is slightly conical in shape.
Mobile Preview: The image shows a soldering iron tip with a metallic handle. The handle has a non-slip, black rubber coating and ends in a sharp, long, metallic tip.
Mobile Preview: The image displays a technical drawing with dimensions. There is an elongated shape that tapers to a point at one end. Measurements are provided in millimeters.
Mobile Preview: The image shows a silver 3.5 mm jack plug with a non-slip, black rubber coating. The plug has three contact strips and is slightly conical in shape.
Notice / Inquire

Soldering tip round sloped RTP 012 B MS

dpvlink:
25598
Ø:
1.2 mm
Properties:
Further product information
 
at short notice at short notice
36,35 EUR

excl. 19% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Soldering tip round sloped RTP 012 B MS

The Weller soldering tip RTP 012 B MS is characterized by its precisely beveled round shape with a diameter of 1.2 mm and a length of 16.3 mm. This model meets the strict MIL-SPEC standards according to MIL-STD-2000, ensuring higher reliability and performance. The special insulation against ground reduces interference frequencies, making the soldering tip ideal for demanding applications in sensitive electronic environments.
Note that the RTP 012 B MS is specifically designed for use with the MS soldering iron WXPP MS from Weller and is not compatible with conventional soldering irons. This specification ensures optimal functionality and durability of the soldering tip, which is specially developed for professional users in electronics manufacturing.
Ø
Ø
1.2 mm
Length
Length
16.3 mm
Soldering tip shape
Soldering tip shape
round , sloped
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.

Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 614
Complete Catalog 2023 - 2024

Product Family

RTP - Round tip MS sloped

RTP soldering tips (MIL-SPEC version) with needle tip sloped for soldering irons WXPP MS

MS soldering tips are MIL-SPEC compliant, i.e. they are used according to MIL-STD-2000. In contrast to conventional soldering tips, they have additional insulation to ground, which avoids interference frequencies. MS soldering tips are not compatible with conventional handpieces, but must always be used with MS soldering irons.


Article image
Article description
ESD
Ø
Price
Compare
501.019.99 - Soldering tip round sloped RTP 004 B MS
501.019.99
Soldering tip round sloped RTP 004 B MS
0.4 mm
36,35 EUR
501.020.99 - Soldering tip round sloped RTP 012 B MS
501.020.99
Soldering tip round sloped RTP 012 B MS
1.2 mm
36,35 EUR
Show Compare List (0)

This product is compatible with (for example):

The image shows a sturdy, black holder with an adjustable metal clamp mounted on a base. It bears the brand "Weller" and is intended for precision work.
SD 1000 solder dispenser
Solder dispenser SD-1000
dpvlink
7479

62,20 EUR
Show product
The image shows a sturdy holder made of black metal. It has a rectangular base, a vertical stand, and a horizontal arm designed for holding devices.
Solder tin dispenser ESD DS-2500
Solder tin dispenser ESD DS-2500 with tool holder
dimensions.: 190 x 150 x 155 mm, weight 1 kg
dpvlink
17637

30,90 EUR
Show product
The image shows a sturdy, rectangular stand made of black metal. It features two vertical tubes that taper upwards, along with various mounts on the top.
Solder tin dispenser ESD DS-25002B for 2...
Solder tin dispenser ESD DS-2500B for 2 reels
dimensions.: 190 x 150 x 300 mm, weight 1.4 kg
dpvlink
17637

54,10 EUR
Show product
The image shows a black metal bracket. It has a triangular shape with several holes and an adjustable pin to attach various devices.
Solder tin reel holder ESD for second reel...
Solder tin holder ESD DS-2500AB
(Additional holder for second solder wire reel)
dpvlink
17637

24,75 EUR
Show product
The image shows a tool station for winding wires. It consists of a sturdy base, a spool with silver wire, and a stand that holds two markers and a pair of pliers.
Solder tin dispenser ESD DS-2500-K incl....
Solder tin dispenser ESD DS-2500-K incl. tools
Diagonal cutting pliers TRE 03 NB
Flat-nosed pliers PN2005
desoldering pump PD03
Tweezers 0SA
Phillips Screwdriver PG2-1
dimensions: 190 x 150 x 255 mm, weight 1.4 kg
dpvlink
17637

63,00 EUR
Show product
The image shows a temperature measuring device in a light blue casing. It has a large display showing the temperature at 23.5 °C, below which there are two buttons and a small probe.
Temperature measuring device WCU
ESD temperature measuring device WCU
Battery operation, digital display,
Temperature unit °C and °F
dpvlink
26514

381,90 EUR
Show product
The image shows a black holder with three tiered levels. On each level, there are several round, slightly raised depressions in turquoise. The inscription "Weller" is in white on the front.
Soldering tip holder WCTH
ESD Soldering tip holder WCTH
suitable for up to 16 active Weller RT
soldering tips
dpvlink
26512

19,35 EUR
Show product
The image displays a three-pronged metal clip. In the center, there is a coiled wire from which two wires with colored plastic handles (green and white) extend. At the top, there is a loop.
Sensors WCU for temperature measuring device...
Sensor WCU temperature meter WCU
PU = 10 pieces
Diameter 0.12 to 0.80 mm
dpvlink
30919

30,65 EUR
Show product
The image displays an electronic soldering iron stand. It is predominantly black with blue accents. On the front, there is a slot for the soldering iron and two buttons on the top.
-20%
-20%
Weller Soldering tip cleaner WATC 100F
Automatic Tip Cleaner WATC100F, 240 V
with fiber brushes, antistatic housing
Universal, fast cleaning of soldering tips and
Tweezers
dpvlink
28144

RRP 402,00 EUR
Only 321,60 EUR
Show product
The image displays an electronic soldering iron stand. It is predominantly black with blue accents. On the front, there is a slot for the soldering iron and two buttons on the top.
-20%
-20%
Weller Soldering tip cleaner WATC 100M
Automatic tip cleaner WATC100M, 240 V
with metal brushes, antistatic housing
Universal, fast cleaning of soldering tips and
tweezers
dpvlink
28144

RRP 402,00 EUR
Only 321,60 EUR
Show product
The image shows two round hair brushes with many short, wood-like bristles. The brushes have a black handle and are symmetrically arranged. They appear sturdy and are intended for hair styling.
Fiber brushes WATCBF
Fiber brushes WATCBF
for tip cleaners WATC100M/WATC100F
PU = 2 pieces
dpvlink
28147

86,15 EUR
Show product
The image shows a long, narrow wooden stick with a sharp, pointed edge. The surface is smooth and dark brown to black. The stick appears robust and stable.
Soldering tool type 35622
Soldering tool 35622 / SP-3010
fiber glass nylon reinforced plastic
dpvlink
20227

3,76 EUR
Show product
The image shows a gray wooden block in a rectangular shape. It has a rough surface and is flat with rounded edges. The dimensions are approximately twice as long as they are wide.
Polishing stone
Grinding stone to remove thick
oxide layers from soldering tips
Cleaning possible only in cold condition of the
soldering tip
dpvlink
13825

15,15 EUR
Show product
The image shows a small, round tin with a screw-on lid. On the surface, the name "Weller" and information about the contents, described as an activator for soldering irons, are displayed.
Tip activator
Soldering tip activator lead-free
dpvlink
7484

10,15 EUR
Show product
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC cleaning wool stainless steel
Spiral wool for WDC replacement (2 pcs)
dpvlink
30244

7,55 EUR
Show product
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC 2 cleaning wool steel
Spiral wool for WDC 2 replacement (2 pcs)
dpvlink
30244

7,95 EUR
Show product
The image shows a brush with a long wooden handle. The bristles are gray and soft. The handle features the inscription "Weller". The brush appears sturdy and handy.
Stainless steel brush (3 pieces)
Stainless steel wire brush
(3) packed
dpvlink
13823

16,10 EUR
Show product
The image shows a gold-colored, spiral-shaped object made of thin wires. It has an irregular, foamy shape and looks somewhat like a curly ball.
WDC 2 cleaning wool brass
Spiral wool for WDC 2 replacement
brass-plated
PU = 2 pcs
dpvlink
30244

6,15 EUR
Show product
The image shows a small, black pipe cleaner with a golden sponge on top. It has a semi-circular shape and a small shelf. The sponge is soft and textured.
WDC - Dry Cleaner
WDC Weller - Dry cleaner
dpvlink
7481

29,65 EUR
Show product
The image shows a small, black, wedge-shaped object with a round, golden surface texture. It has a smooth side and a lateral adjustment screw.
WDC 2 - Dry Cleaner
WDC Weller - Dry cleaner
for WDH safety rests
dpvlink
7481

19,80 EUR
Show product
The picture shows a cleaning kit: a black box with golden contents, a green tube, a gray sponge, and a wooden brush with metal bristles. All parts are arranged on a white background.
WDC Cleaning set complete
WDC - cleaning set consisting of:
WCD dry cleaner, WPB1 grindstone, tip activator,
stainless steel brush
dpvlink
7481

57,45 EUR
Show product
The image shows four tools: a black soldering station with a golden spiral, a round can with green contents, a gray grinding stone, and a wooden brush with metal bristles.
WDC 2 Cleaning set complete
WDC 2 - cleaning set consisting of:
WCD dry cleaner, tip activator,
stainless steel brush
dpvlink
7481

49,75 EUR
Show product
The image shows a round, metal tin with a screwable lid. The tin is partially open and contains gray, fine material. The lid reads "Timber".
FELDER tinner
FELDER tInner, ++lead-free++ approx. 15 g can
Flux DIN EN 29454, 1.2.3.B
(with adhesive pad on the bottom)
dpvlink
17086

6,45 EUR
Show product
The image shows two round brushes with a black plastic head and a dense, gray bristle field. They are designed for cleaning purposes and have a compact shape.
Metal brushes WATCBM
Metal brushes WATCBM
for tip cleaners WATC100M/WATC100F
PU = 2 pieces
dpvlink
28147

86,15 EUR
Show product