The image shows a slim, black screwdriver with a ceramic head and a round handle. The head is narrow and has a transparent protective cap.
Ceramic trimmer slotted XONIC 4845-ESD 1.8x15
(Product No.: 4845-ESD1.8x15)
The image shows a slim, black screwdriver with a ceramic head and a round handle. The head is narrow and has a transparent protective cap.
Notice / Inquire

Ceramic trimmer slotted XONIC 4845-ESD 1.8x15

dpvlink:
1687
Screwdriver type:
Slotted
Tip:
SL1,8
Shank length:
15 mm
Properties:
Further product information
 
chevron-down
available available
-15%
RRP 17,75 EUR
Only 15,09 EUR
per PCE

excl. 19% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Ceramic trimmer slotted XONIC 4845-ESD 1.8x15

  • Zirconia ceramic tips - safe trimming of highly sensitive electrical components.
  • No electromagnetic induction.
  • No eddy current loss at HF (high frequency).
  • 100 % electrical insulation.
  • 100 % non-magnetic.
  • 100 % antistatic.
  • Unsurpassed wear resistance - 10 x better than metal / 100 x better than plastic.
  • Total heat resistance of the blades up to 1000°C.
  • Extremely low thermal conductivity.
  • 100% stainless.
  • Highly resistant to all strong acids (except hydrofluoric acid).
  • Non-stick surface to prevent solder, soft solder or silver from sticking to surfaces.
  • The contamination-free blades make them suitable for clean rooms.

Screwdriver type
Screwdriver type
Slotted
Tip
Tip
SL1,8
Shank length
Shank length
15 mm
Handle length
Handle length
85 mm
Shank-Ø
Shank-Ø
1.8 mm
ESD
ESD
yes
Show accessories
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.
Slotted
The slotted head, also known as the flat slotted head, is one of the oldest and simplest screw head shapes. It has a single, straight slot on the top of the screw head, which is operated with a flat screwdriver (slotted screwdriver).

Accessories

Accessories

The image shows a red, rectangular tool for magnetization and demagnetization. It has two areas with symbols, instructions in German, and the "wiha" logo at the bottom edge.
Magnetizer
Magnetizer
Size: 50 x 50 x 29 mm / WxHxD


for magnetizing and demagnetizing of blades and similar tools made of steel
dpvlink
10806

11,25 EUR
Show product
Documents

Downloads

For this article you will find, for example, (operating) instructions, product and material information, care instructions, safety and technical data sheets. Please log in or register now to access the documents.

Login or register now

Product Family

XONIC 4845-ESD Ceramic trimmer slotted

  • Zirconia ceramic tips - safe trimming of highly sensitive electrical components.
  • No electromagnetic induction.
  • No eddy current loss at HF (high frequency).
  • 100 % electrical insulation.
  • 100 % non-magnetic.
  • 100 % antistatic.
  • Unsurpassed wear resistance - 10 x better than metal / 100 x better than plastic.
  • Total heat resistance of the blades up to 1000°C.
  • Extremely low thermal conductivity.
  • 100% stainless.
  • Highly resistant to all strong acids (except hydrofluoric acid).
  • Non-stick surface to prevent solder, soft solder or silver from sticking to surfaces.
  • The contamination-free blades make them suitable for clean rooms.

Article image
Article description
ESD
Screwdriver type
Tip
Shank length
Price
Compare
4845-ESD0.9x15 - Ceramic trimmer slotted XONIC 4845-ESD 0.9x15
4845-ESD0.9x15
Ceramic trimmer slotted XONIC 4845-ESD 0.9x15
Slotted
SL0,9
15 mm
17,95 EUR
4845-ESD1.3x15 - Ceramic trimmer slotted 4845-ESD 1.3x15
4845-ESD1.3x15
Ceramic trimmer slotted 4845-ESD 1.3x15
Slotted
SL1,3
15 mm
17,95 EUR
-15%
4845-ESD1.8x15 - Ceramic trimmer slotted XONIC 4845-ESD 1.8x15
4845-ESD1.8x15
Ceramic trimmer slotted XONIC 4845-ESD 1.8x15
Slotted
SL1,8
15 mm
RRP 17,75 EUR
Only 15,09 EUR
4845-ESD2.6x15 - Ceramic trimmer slotted XONIC 4845-ESD 2.6x15
4845-ESD2.6x15
Ceramic trimmer slotted XONIC 4845-ESD 2.6x15
Slotted
SL2,6
15 mm
17,75 EUR
Show Compare List (0)

This product is compatible with (for example):

This is a yellow toolbox with a flat lid and a handle on top. It has a black clasp and an iconic logo on the front.
ESD toolbox dissipative, yellow
ESD
ESD tool box, yellow E9 / dissipative
Dimensions 370 x 190 x 135 mm, weight 0.65 kg
electrostatically dissipative / E9 dissipative
(DIN EN 61340-5-1)
dpvlink
8008

120,80 EUR
excl. 19% tax
Show product
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
Hexagon ballpoint screwdriver XONIC 4838X-ESD...
ESD / Screwdriver type: Hexagonal / Tip: SW2,0 / Shank length: 50 mm
ESD screwdriver 4838X-ESD 2.0 x 50
(Hexagon ballpoint 2.0 x 50 mm)
dpvlink
1651

9,75 EUR
excl. 19% tax
Show product
The image shows a screwdriver with a black handle and a metallic blade. On the handle is written "non-insulating" and "Germany". The handle has an ergonomic shape.
Socket wrench XONIC 4840X-ESD 4.0x60
ESD / Screwdriver type: External hexagon / Socket wrench / Tip: SW4,0 / Shank length: 60 mm
ESD socket 4840X-ESD 4.0x60
(AF 4.0 mm)
dpvlink
1681

15,10 EUR
excl. 19% tax
Show product
The image shows a black Phillips screwdriver. The handle is ergonomic, with inscriptions for safety instructions. The blade is narrow and long, ideal for precise work.
Screwdriver XONIC 4875X-ESD PZD 1 x 80
ESD / Screwdriver type: Pozidriv / Tip: PZD1 / Shank length: 80 mm
ESD screwdriver 4875X-ESD 1 x 80
(Cross-tip blade PZD 1)
dpvlink
1647

5,35 EUR
excl. 19% tax
Show product
The image shows a black screwdriver with a long, thin metal head and a non-slip handle. The handle has an ergonomic shape and is labeled.
Torx screwdriver XONIC 4877X-ESD TX 06 x...
ESD / Screwdriver type: Torx / Tip: TX06 / Shank length: 50 mm
ESD screwdriver 4877X-ESD TX 06 x 50
(Torx blade TX 06 x 50)
dpvlink
1656

5,65 EUR
excl. 19% tax
Show product
The image shows a screwdriver with a slim, gray handle and a yellow upper part. The blade is long and thin, ideal for precise screwdriving.
Slotted screwdriver XONIC 4880X-ESD 0.8x60...
ESD / Screwdriver type: Slotted / Tip: SL0,8 / Thickness: 0.2 mm / Shank length: 60 mm
ESD screwdriver 4880X-ESD 0.8 x 60
(Slotted blade 0.8 x 0.2 mm)
dpvlink
1626

7,30 EUR
excl. 19% tax
Show product
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
Phillips screwdriver XONIC 4882X-ESD PH 000...
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH000 / Shank length: 60 mm
ESD screwdriver 4882X-ESD 000 x 60
(Cross-tip blade PH 000)
dpvlink
1639

7,75 EUR
excl. 19% tax
Show product
The image shows four screwdrivers with black handles and yellow prints. The blades vary in length and are pointed, suitable for delicate work on electronics.
ESD screwdriver set 4-piece XONIC
ESD / Screwdriver type: Crosstip (Philips) / Slotted
ESD screwdriver set 4 pieces
Slotted screwdriver 1.8 x 60, 3 x 100.
4 x 150 mm, Phillips screwdriver
PH 0 x 60
dpvlink
21582

18,25 EUR
excl. 19% tax
Show product

This product is similar to: