The image shows a narrow, red screwdriver bit with a cross-shaped tip. Numbers and the brand name "Wiha" are embossed on the bit.
Pozidriv echangeable blade slimBit 2831 VDE PZ2
(Product No.: 2831VDE.PZ2)
The image shows a narrow, red screwdriver bit with a cross-shaped tip. Numbers and the brand name "Wiha" are embossed on the bit.
Notice / Inquire

Pozidriv echangeable blade slimBit 2831 VDE PZ2

dpvlink:
21978
Tags:
Screwdriver type:
Pozidriv
Shank-Ø:
6.0 mm
Tip:
PZ2
max. Nm:
5.5 Nm
Properties:
Further product information
 
chevron-down
at short notice at short notice
7,65 EUR
per PCE

excl. 19% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Pozidriv echangeable blade slimBit 2831 VDE PZ2

The Pozidriv interchangeable slimBit 2831 VDE PZ2 from Wiha is specifically designed for electricians who need to securely reach even hard-to-access screws. Thanks to Wiha's innovative slimTECHNOLOGY, which allows for a blade up to 33% slimmer by integrating the protective insulation, this interchangeable blade provides optimal access to deep-set screws and spring elements.
The blade, with a shaft diameter of 6.0 mm and a length of 75 mm, is designed for use in the slimVario® bit holder and slimTorque VDE bit holder, which are specifically designed for the torque system with a maximum force of 5.5 Nm. The PZ2 tip ensures precise work with Pozidriv screws.
Each interchangeable blade is individually tested according to the IEC 60900 standard at 10,000 V AC and is approved for work up to 1,000 V AC, ensuring a high safety standard. Weighing just 11 g, the slimBit 2831 VDE PZ2 is lightweight and easy to handle. This tool combines safety and functionality for professional demands.
Screwdriver type
Screwdriver type
Pozidriv
Shank-Ø
Shank-Ø
6.0 mm
Tip
Tip
PZ2
max. Nm
max. Nm
5.5 Nm
Length
Length
75 mm
ESD
ESD
no
Weight
Weight
11 g
Weight
Weight
11 g
Show accessories
Pictograms
VDE
The VDE mark indicates that electrical products comply with the requirements of IEC 60900. It ensures the highest safety and quality standards for devices designed for use at voltages up to 1000 V AC (alternating current) and 1500 V DC (direct current).
Pozidriv
The Pozidriv head is a further development of the crosstip head and is often used in similar applications. In addition to the main arms of the crosstip head, the Pozidriv screw head has small lines placed between the arms to further reduce slippage of the tool.

Accessories

Accessories

The image shows three screwdrivers. At the top, a yellow-red screwdriver with a wide blade. In the middle, a red screwdriver with a special tip. At the bottom, a black screwdriver with a simple blade.
Torque handle TV 3 VDE 2872
Torque handle TV 3 / VDE, red/yellow
with scale, maximum torque 0.5-2.0 Nm,
adjustable ++ Wiha TorqueVario-S++
1000V EN 60900
dpvlink
9370

152,55 EUR
Show product
The image shows three screwdrivers. At the top, a yellow-red screwdriver with a wide blade. In the middle, a red screwdriver with a special tip. At the bottom, a black screwdriver with a simple blade.
Torque handle TV 4 VDE 2872
Torque handle TV 4 / VDE, red/yellow
with scale, maximum torque 0.8-5.0 Nm;
adjustable ++ Wiha TorqueVario-S++
1000V EN 60900
dpvlink
9370

158,50 EUR
Show product
The image shows three screwdrivers. At the top, a yellow-red screwdriver with a wide blade. In the middle, a red screwdriver with a special tip. At the bottom, a black screwdriver with a simple blade.
Torque handle TV 5 VDE 2872
Torque handle TV 5 / VDE, red/yellow
with scale, maximum torque 2.0- 7.0 Nm;
adjustable ++ Wiha TorqueVario-S++
1000V EN 60900
dpvlink
9370

169,35 EUR
Show product
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 433
Complete Catalog 2023 - 2024

Product Family

Wiha slimBit Pozidriv - exchangeable blade VDE

The blade diameter of conventional electrician's screwdrivers is often too large to reach deep-set screws. However, removing the insulation is not permitted and also puts your own safety at risk. With Wiha slimTECHNOLOGY, specially developed for electrical applications, the protective insulation has been integrated into the blade to enable blades that are up to 33% slimmer. This means that even low-lying screw and spring elements can be reached effortlessly with the slimBits.

The insulated slimBits are subjected to routine testing in accordance with the international IEC 60900 standard and enable safe working in the area of live parts up to 1,000 V AC. 6 mm slimBits can only be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).

  • Increases your safety - Wiha slimBits ensure good and protected access to low-lying screws.
  • Saves space - space-saving thanks to extensive interchangeable bit system.
  • Offers you full protection - each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

 


Article image
Article description
ESD
Screwdriver type
Shank-Ø
Tip
max. Nm
Price
Compare
2831VDE.PZ1 - Pozidriv echangeable blade slimBit 2831 VDE PZ1
2831VDE.PZ1
Pozidriv echangeable blade slimBit 2831 VDE PZ1
Pozidriv
6.0 mm
PZ1
3.8 Nm
7,65 EUR
2831VDE.PZ2 - Pozidriv echangeable blade slimBit 2831 VDE PZ2
2831VDE.PZ2
Pozidriv echangeable blade slimBit 2831 VDE PZ2
Pozidriv
6.0 mm
PZ2
5.5 Nm
7,65 EUR
Show Compare List (0)

This product is compatible with (for example):

The image shows a black toolbox with a removable lid. The box has a sturdy handle and is rectangular, suitable for storing tools or other items.
ESD Toolbox Compact 15
ESD
ESD compact 15, tool case,
dimensions: 170 x 425 x 215 mm,
(DIN EN 61340-5-1) Part no. COMPA 15 ESD
!!!! without partition system !!!
dpvlink
8010

71,55 EUR
excl. 19% tax
Show product
The image shows a narrow, cylindrical screwdriver or tool with a black handle and a silver metal head. It has a green marking and a clip for attachment.
ESD EC Electric screwdriver CGS10
ESD / Start type: lever start/ push start / Torque range: 0.1 - 1.0 Nm / Idle speed High: 980 / Idle speed Low: 100
SGT-CGS10-ESD EC Electric screwdriver "Kilews"
++CGS Series ++, lighting with LEDs
Lever start/push start/lever + push start
0.05 - 1.0 Nm, 90 Watt, speed 980rpm,
length: 280 mm, weight 0.680 kg
Bit holder B: 1/4" hex 6.35 mm (Hex)
!! Without control unit !!

Serial No. ......................
dpvlink
24714

2.228,00 EUR
excl. 19% tax
Show product
The image shows a gray cordless drill with a black attachment. It features a handle with a yellow trigger button and an elongated, round end suitable for screws.
ESD Cordless screwdriver with pistol grip...
ESD / Torque range: 0.5 - 2.0 Nm / Idle speed High: 2700 / Idle speed Low: 1900
SKC-PTA-BT20FB-ESD Industrial cordless screwdriver
++Series BT - maintenance-free brushless motor++
torque 0.50 - 2.0 Nm stepless, 10.8 Volt DC
Speed LO 1900 - HI 2700 rpm,
Length: 189 mm, weight (without battery) 0.700 kg
Bit holder B: 1/4" hexagon 6.35 mm (hex)
Scope: incl. 1 battery SKC-LB1025S
Serial no. ......................
dpvlink
26384

803,00 EUR
excl. 19% tax
Show product
The image shows a set of six screwdrivers on a stand. The handles are yellow with a rubberized surface, and the tips are metallic shiny and of varying lengths.
Slotted / Phillips screwdriver set, 7-piece,...
ESD / Screwdriver type: Slotted / Crosstip (Philips)
Kit slotted/Phillips screwdrivers, 7 pieces ESD
incl. holder
dpvlink
6987

34,30 EUR
excl. 19% tax
Show product
The image shows a red screwdriver with a gray, flat head. On the handle, the markings "wiha", "T9", and "2.5 Nm" are printed. The handle is non-slip with a textured surface.
TORX exchangeable blade slimBit 2831 VDE...
Screwdriver type: Torx / Tip: T9 / Shank-Ø: 6.0 mm / max. Nm: 1.3 Nm
TORX slimBit T9
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
20126

7,65 EUR
excl. 19% tax
Show product
The image displays a screwdriver with a slim, red handle and a black screw head. The handle is embossed with the brand name and technical details.
Slotted/Pozidriv exchangeable blade slimBit...
Screwdriver type: Slotted / Pozidriv / Tip: SL/PZ2 / Shank-Ø: 6.0 mm / max. Nm: 3.8 Nm
Slotted/Pozidriv slimBit SL/PZ2
for plus-minus clamping screws
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21984

7,65 EUR
excl. 19% tax
Show product
The image shows a red screwdriver bit with a flat and a Phillips head tip. The handle displays product details and the brand "Wiha". The bit is slim and handy.
Slotted/Philips exchangeable blade slimBit...
Screwdriver type: Slotted / Crosstip (Philips) / Tip: SL/PZH1 / Shank-Ø: 6.0 mm / max. Nm: 3.8 Nm
Slotted/Phillips slimBit SL/PH1
for plus-minus clamping screws
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21981

7,65 EUR
excl. 19% tax
Show product
The image displays a red screwdriver with a sleek design. On the handle, technical specifications such as "5.0 / 15.5 Nm" and the brand "wiha" are printed.
Hexagon exchangeable blade slimBit 2831 VDE...
Screwdriver type: Hexagonal / Tip: SW5,0 / Shank-Ø: 6.0 mm / max. Nm: 5.5 Nm
Hexagone slimBit VDE 5.0 x 75 mm
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21988

7,65 EUR
excl. 19% tax
Show product
The image shows a red screwdriver with a black metal tip. The handle displays information about torque and brand. The handle has a diamond-shaped structure for better grip.
Hexagon exchangeable blade slimBit 2831 VDE...
Screwdriver type: Hexagonal / Tip: SW2,0 / Shank-Ø: 6.0 mm / max. Nm: 1.8 Nm
Hexagone slimBit VDE 2.0 x 75 mm
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21988

7,65 EUR
excl. 19% tax
Show product
The image shows a red screwdriver with a flat, narrow head. It has a textured, ergonomic grip surface for better hold and bears the brand "wiha".
Square exchangeable blade slimBit 2831 VDE...
Screwdriver type: inner square / Tip: 2.3 / Shank-Ø: 6.0 mm / max. Nm: 5.5 Nm
Square slimBit Robertson 1, 2.3 mm
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21996

7,25 EUR
excl. 19% tax
Show product
The image shows a red screwdriver with a slim head. On the side, the inscriptions "wiha," "PH2 1.5 Nm," and a series of numbers are visible. The head is flat and made of metal.
Phillips echangeable blade slimBit 2831 VDE...
Screwdriver type: Crosstip (Philips) / Shank-Ø: 6.0 mm / Tip: PH2 / max. Nm: 5.5 Nm
Phillips slimBit PH2
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21975

7,65 EUR
excl. 19% tax
Show product
The image shows a red screwdriver with a black tip. The handle has dimensions and the brand name "wiha" printed on it. The dimensions are 0.5x3.0 and 0.6 Nm.
Slotted exchangeable blade 2831 VDE 3.0
Screwdriver type: Slotted / Tip: SL3,0 / Shank-Ø: 6.0 mm / max. Nm: 0.6 Nm
Slotted slimBit VDE 3.0 x 0.5 mm
for use with slimTorque VDE bit holder
++ Wiha SoftFinish electric++ 1000V EN 60900
dpvlink
21968

7,65 EUR
excl. 19% tax
Show product
The image shows a black cordless screwdriver with an ergonomic handle and a rotating front part used for driving screws. There is a key on the bottom for bit insertion.
ESD electric screwdriver BN512L
ESD / Torque range: 0.15 - 1.18 Nm / Idle speed High: 1000 / Idle speed Low: 650 / Screw size thread screw: 1.6- 3.0 mm / Screw size self-tapping: 1.6- 2.6 mm / Start type: lever start
SKD-BN512L-ESD electric screwdriver "Kilews"
+ series 500 - maintenance-free brushless motor +
Lever start (0.15 - 1.18 nm), 32 volt DC - 55 W
Speed LO 650 - HI 1000 U/Min.;
Length: 239 mm, 0.520 kg weight
bit holder B: 1/4" hex 6.35 mm
Without control unit!
Serial no….
dpvlink
20317

489,00 EUR
excl. 19% tax
Show product
The image displays a black heat gun with an elongated handle and a rounded nozzle. It has a cord and an orange button. The surface is textured to be non-slip.
ESD electric screwdriver BN203L
ESD / Torque range: 0.02 - 0.34 Nm / Idle speed High: 1000 / Idle speed Low: 700 / Screw size thread screw: 1.0- 2.3 mm / Screw size self-tapping: 1.0- 2.0 mm
SKD-BN203L-ESD electric screwdriver "Kilews"
+ series 200 - maintenance-free brushless motor +
Lever start (0.02 - 0.34 nm), 32 volt DC - 25 W
Speed LO 700 - HI 1000 U/Min.;
Length: 182 mm, 0.39 kg weight
bit holder B: 1/4" hex 6.35 mm
Without control unit!
Serial no….
dpvlink
20302

478,00 EUR
excl. 19% tax
Show product
The image shows a pair of pliers with metallic, shiny cutting surfaces and gray, non-slip plastic handles. It is used for cutting wire or similar material.
Diagonal cutting pliers 7803125 ESD
ESD / Bevel: without bevel / Head type/size: small / Max Ø soft: 1,63 mm / Max Ø medium: 1.02 mm / Version: with opening spring / Surface: polished
ESD precision diagonal cutting pliers 125 mm
++ KNIPEX Super-Knips++ INOX stainless steel
Cutting edge hardness approx. 54 HRC,
without bevel, ESD version (DIN EN 61340-5-1)
dpvlink
8830

21,15 EUR
excl. 19% tax
Show product
The image shows a pointed pair of pliers with ergonomic, gray and black handles. The tips of the pliers are narrow and sharp, ideal for cutting or gripping small objects.
Diagonal cutting pliers 3766DF ESD
ESD / Bevel: without bevel / Head type/size: extra small / Head shape: snipe nose / Max Ø soft: 1.45 mm / Max Ø medium: 0.81 mm
ESD diagonal cutting pliers, 120 mm, pointed head
and flattened, without bevel ++SensoPlus++
ESD version (DIN EN 61340-5-1 + IEC)
dpvlink
1440

45,75 EUR
excl. 19% tax
Show product
The image shows a screwdriver with a long, narrow metal end and a yellow, ergonomic handle. On the handle is "wiha" in black lettering.
TORX screwdriver 362 TX 09 x 60
ESD / Screwdriver type: Torx / Tip: TX09 / Shank length: 60 mm
ESD screwdriver TX 9 x 60
(Torx blade TX 9 x 60), ++ Wiha Softfinish ESD ++
dpvlink
6420

8,35 EUR
excl. 19% tax
Show product
The image shows a toolset with a red screwdriver, a black storage case, a charger with a USB cable, and two batteries.
Electric screwdriver speedE II electric VDE...
E-screwdriver speedE II electric VDE
7 pcs. set consisting of:
1x E-screwdriver handle speedE® II
1x Bit slimBit electric slot 3.5 mm x 75 mm
1x Bit slimBit electric PlusMinus/Pozidriv SL/PZ2 x 75 mm
1x charger for battery type 18500 Li-Ion with USB
1x Battery set 18500 Li-Ion 2 pcs. in Box
1x L-Boxx mini
dpvlink
30564

130,60 EUR
excl. 19% tax
Show product

This product is similar to: