Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco EPApro Gotschlich ideal tek SCS Simco
The image shows a white fan with a large, round grille at the front. It has a rotary knob on the side and a small display below, which may indicate the operational status.
Ionizing blower 5802i CXL - mobile tabletop model
ESD / Discharge time max.: 1 - 2 s / Ozone generation max.: 0.008 ppm
Ionizing blower 5810i CXL +SIMCO+
mobile tabletop model, Steady State DC,
automatic ermitter cleaning system,
base for table mounting, coverage 30x150 cm
incl. power supply unit
Serial No.:

Product No.: 7500.CXL
1.068,00 EUR
excl. 19% tax
Show product
The image shows a white-gray fan attached to a movable arm. The arm is made of metal and is green. The fan has a grid for air circulation and a small control light.
Spring joint arm for ionizer minION
Spring-loaded arm for MINion
incl. mounting bracket

Product No.: 7500.M.S
199,20 EUR
excl. 19% tax
Show product
The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
CPM 35 Ionizer Tester
ESD
CPM 35 Ionizer tester for fully automatic
testing of ionizing devices
incl. grounding cable and storage bag

Product No.: 7100.CPM35
1.024,00 EUR
excl. 19% tax
Show product
The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
WIM 47 Ionizer Monitor
ESD
Ionizer Monitor WIM 47
Monitoring device for fully automatic
monitoring of the ionization
Delivery:
1x Ionizer Monitor WIM 47
1x plug-in power supply unit with adapter (EU/USA)
1x Grounding cable
1x Quick Start Guide

Product No.: 7100.WIM47
1.011,00 EUR
excl. 19% tax
Show product
The image shows a square, black ionizer tester with a yellow top. In the center, there is a screen, and below are buttons for
Ionizer Tester CPM54
CPM 54 Ionizer Tester for standard-compliant
measurement of
the discharge time and offset voltage of
ionizers, personal charging (Body Voltage
test), color display
Scope of delivery:
Ionizer Tester CPM54
3 x Lithium Ion Batteries
Charger with EU plug
Instruction manual (DE/EN)
Calibration certificate (DE/EN)

Product No.: 7100.CPM54
3.120,00 EUR
excl. 19% tax
Show product
The image displays a long, rectangular device in light colors. It has multiple outputs on the bottom and controls on the front, as well as blue lettering with the name
AeroBar MP 5635 Ionizing bar 350 mm
Width : 34 mm / Height : 78 mm / Length : 450 mm / Active length: 350 mm / Emitters: 8 / Emitter spacing: 50 mm
AeroBar MP 5635 ionizing bar 350 mm, 24Volt DC
Emitter spacing 50mm, alarm output signal,
Air support, [ ISO Class 1 ]

**This product is excluded from exchange**

Product No.: 7500.AB-MP.18
Price on request
Show product
The image shows an elongated, gray device with a blue label. It has two small LED lights in different colors and is intended for wall mounting.
fusION - Mini Ionizer
fusION - mini ionizer (without blower), 24V DC
low space requirement,
dimensions: 51 x 33 x 89 mm (WxHxD),
emitter points: Tungsten
[ISO 6 / Cleanroom class 1,000]
Serial no.:

Product No.: 7500.FU
Price on request
Show product
The image shows a small, square fan. It has a black rotor in the center and a light, rectangular frame with four mounting holes in the corners.
Blower pluggable, 40 x 40 x 10 mm for mini ionizer fusION
fusION - blower attachable 40 x 40 x 10 mm
Power supply via device

Product No.: 7500.FU.FAN
Price on request
Show product
Image
Nozzle attachment 60° Standard for EPAtec ion spray can
EPAtec OP 60S nozzle attachment 60°, wide blowing
for 7501.AN-HP02

Product No.: 7501.OP-60S
Price on request
Show product
The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
 Discontinuing
-10%
 Discontinuing
-10%
Ionizing blower 5810i - overhead model with 2 fans
Width : 155 mm / Height : 96 mm / Length : 813 mm / Version: overhead unit, mit 2 fans / Coverage: 610 x 1220 mm
Ionizing blower 5810i - Overhead model +SIMCO+
coverage 61 x 122 cm, automatic
ermitter cleaning system, Steady State DC),
Cleanroom class ISO 14644, class 4
(Power cable not included)
Serial No.:

Product No.: 7500.C32X-E
Our standard price 1.701,00 EUR
Your price 1.530,90 EUR
excl. 19% tax
Show product
The image shows three black control boxes with colored buttons and glowing LEDs. At the top is a larger box with two control indicators, below are two smaller boxes with various functions.
 Discontinuing
-20%
 Discontinuing
-20%
Dual station DS 740 permanent monitoring system
Double station type DS-740, permanent monitoring
control monitor incl. 2 connection boxes
Connection type: banana plug 4 mm
park position snap 3 mm and MagSnap

Product No.: 7110.740
Our standard price 403,00 EUR
Your price 322,40 EUR
excl. 19% tax
Show product
113 to 123 (from a total of 123)