Protective lacquers
|
|
Brushing or spraying Mix the diluted lacquer well and let it rest for about 2 hours before spraying or brushing. Brush at room temperature with a natural fiber brush. Dip coating Dip the assemblies vertically. Dwell time approx. 1 minute. Pull them out slowly so that an even film is formed. For draining hang it over the tank. Drying Most of the protective lacquers have different drying times. | |
Protective lacquers are special lacquers developed to protect PCBs and the associated equipment against environmental influences. They protect wirings against chemicals, vibrations, humidity, wetness and high temperatures that could cause corrosion, mold formation and current leakage leading to a failure in case of an uncoated PCB. Protective lacquers improve the reliability and safety of PCBs and offer a life-time efficiency by creating a protective film that insulates the PCB protecting it against enviromental influences like chemicals, humidity and other pollutants. Protective lacquers facilitate a higher current and a shorter distance between the traces as they prevent current leakage. Information on the application Cleaning PCBs have to be cleaned thoroughly before coating so that a maximum of adhesion can be reached. Flux residues have to be removed to prevent corrosion. Environmental regulations To use at min. 16°C or a relative humidity of 75%. As all PCBs absorb humidity, it has to be removed before coating so that the protective lacquer can completely develop his characteristics. Pre- and vacuum-drying are ideal for his purpose. Film thickness Depends on the application method. | |
| ||
| ||
| *The SCC3 assortment can also cure at room temperature - in this case, however, the solvent resistance is lower. For further information see the technical data sheet. **depend on application and geometry 2K100, 2K500, UVCL, AFA, LTC and DCA have passed successfully the qualification of the BMW Group Standards GS95011.5 |
