The image shows an electric plate with digital controls. It has a large, flat surface and a movable upper part that can be pressed down.
The image displays technical drawings of a device measuring 51 cm (W) x 66 cm (H) x 38 cm (D). There is also a side view that is 28 cm deep and 25 cm high.
Preview: The image shows an electric plate with digital controls. It has a large, flat surface and a movable upper part that can be pressed down.
Preview: The image displays technical drawings of a device measuring 51 cm (W) x 66 cm (H) x 38 cm (D). There is also a side view that is 28 cm deep and 25 cm high.

Product Family

Vacuum packaging machines without chamber

The vacuum packaging machines in this series are available as compact table-top units with re-gassing device and high-quality stainless steel housing. The machines offer the following advantages:

  • fast process
  • less gas consumption
  • no limit to the bag length


During each process, only the relevant bag is gas flushed, which means that the process is completed more quickly with less gas consumption than with vacuum packaging machines with a chamber. This makes the machines easy to use and well suited for small batches.


Article image
Article description
Sealing bar length
Voltage
Height
Length
Max. bag width
Width
Compressed air supply
Price
Compare

This product is similar to:

The image displays two identically sized, rectangular sheets in a soft pink hue. They are stacked on top of each other, with a black print description in the center. The surface is smooth and slightly flexible.
Dissipative packaging bags type DPV-3000
400 x 500 x 0.10 mm
Pink, dissipative/antistatic (DIN EN 61340-5-1)

<< Shelf life from production date: 3 years, if stored properly >>

40,90 EUR
The image shows a transparent, shiny plastic bag. Technical or safety-related information is printed on it in yellow font. The bag appears smooth and sealed.
Shielding bag 3M-SCS, type 1000 "metal-in"
150 x 455 mm (6 x 18"), heat-sealable
(DIN EN 61340-5-1)

38,70 EUR
The image shows several silver packages lying open to the side, and beneath them is a green circuit board with multiple components and chips visible.
TOP
TOP
DRY Shield protective bag ESD type DPV-2000
"EPApack" 254 x 305 mm (10 x 12"), shielding bag
with moisture protection, DIN EN 61340-5-1

in compliance with MIL-PRF-81705 and ANSI/ ESD STM11.31

28,50 EUR
The image displays a small circuit board in the lower left corner, surrounded by two silver foil bags and a black coil on the right side of the picture.
Dry-Shield JEDEC protective bags 102 x 660 mm
Shielding / barrier bags with moisture protection
(DIN EN 61340-5-1)

+ correspond to JEDEC-STD-033 B +

58,80 EUR