Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Brands on sale

The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P PicoFinish
The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P 1.3 x 40
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,3 / Shank length: 40 mm
The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P 1.5 x 50
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,5 / Shank length: 50 mm
The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P 2.0 x 50
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,0 / Shank length: 50 mm
The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P 2.5 x 60
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,5 / Shank length: 60 mm
The image shows a screwdriver with a gray handle and red accents. The blade is thin and made of metal, ideal for screwing. The handle is ergonomically shaped.
Hexagon ballpoint screwdriver 264P 3.0 x 60
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0 / Shank length: 60 mm

5 Products
Product No.: 264P.60x2.5
from 7,60 EUR
excl. 19% tax
to the product family
The image shows a red, rectangular tool for magnetization and demagnetization. It has two areas with symbols, instructions in German, and the
Magnetizer
Magnetizer
Size: 50 x 50 x 29 mm / WxHxD


for magnetizing and demagnetizing of blades and similar tools made of steel

Product No.: 400.10
11,25 EUR
excl. 19% tax
Show product
The image displays a series of screwdrivers in various sizes. They have black handles with yellow markings for identification. The blades are metallic and pointed.
Preview: In the picture, there are five black screwdrivers with ergonomic handles. Each screwdriver has a different length and is labeled with greenish writing.
Preview: The image shows six screwdrivers with black handles. The surface of the handles has a yellow marking. The screwdrivers are arranged in various lengths.
Preview: The image shows six screwdrivers in a row. They have black handles with yellow lettering and vary in length. The blades are made of metal and are pointed.
Preview: The image displays a series of screwdrivers in various sizes. They have black handles with yellow markings for identification. The blades are metallic and pointed.
Triton ESD screwdriver sets SL / PH / TX
ESD-protective
In the picture, there are five black screwdrivers with ergonomic handles. Each screwdriver has a different length and is labeled with greenish writing.
ESD Screwdriver set 5-piece 4730ESD
ESD / Screwdriver type: Torx tamper-resistant (with hole)
The image shows six screwdrivers with black handles. The surface of the handles has a yellow marking. The screwdrivers are arranged in various lengths.
ESD Screwdriver Set 6 pieces 4797-ESD
ESD / Screwdriver type: Slotted / Torx
The image shows six screwdrivers in a row. They have black handles with yellow lettering and vary in length. The blades are made of metal and are pointed.
ESD Screwdriver set 6-piece 4741ESD
ESD / Screwdriver type: Pozidriv / Slotted
The image displays a series of screwdrivers in various sizes. They have black handles with yellow markings for identification. The blades are metallic and pointed.
ESD Screwdriver set 6-piece 4741S-ESD
ESD / Screwdriver type: Crosstip (Philips) / Slotted

4 Products
Product No.: 4741S-ESD
from 20,05 EUR
excl. 19% tax
to the product family
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
XONIC 4838X-ESD Hexagon ballpoint
ESD-protective
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
Hexagon ballpoint screwdriver XONIC 4838X-ESD 1.5 x 50
ESD / Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,5 / Shank length: 50 mm
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
Hexagon ballpoint screwdriver XONIC 4838X-ESD 2.0 x 50
ESD / Screwdriver type: Hexagonal / Tip: SW2,0 / Shank length: 50 mm
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
Hexagon ballpoint screwdriver XONIC 4838X-ESD 2.5 x 60
ESD / Screwdriver type: Hexagonal / Tip: SW2,5 / Shank length: 60 mm
The image shows a black screwdriver with a short, straight, silver head. The handle has a non-slip surface and is marked with lettering and symbols.
Hexagon ballpoint screwdriver XONIC 4838X-ESD 3.0 x 60
ESD / Screwdriver type: Hexagonal / Tip: SW3,0 / Shank length: 60 mm

4 Products
Product No.: 4838X-ESD1.5x50
from 9,40 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, narrow metal head and a non-slip handle in black and yellow. The handle has a textured surface for better grip.
Preview: The image shows a screwdriver with a long, narrow metal head and a non-slip handle in black and yellow. The handle has a textured surface for better grip.
Preview: The image shows a screwdriver with a long, thin metal shaft and a rubber handle. The handle is black with yellow patterns and numbers that relate to the blade.
Micro-screwdriver 1569 ESD socket wrench
ESD-protective
The image shows a screwdriver with a long, narrow metal head and a non-slip handle in black and yellow. The handle has a textured surface for better grip.
Micro-screwdriver 1569 ESD socket wrench SW 5.0 x 60
ESD / Screwdriver type: External hexagon / Socket wrench / Tip: SW5,0 / Shank-Ø: 7.0 mm / Shank length: 60 mm / Handle length: 97 mm
The image shows a screwdriver with a long, thin metal shaft and a rubber handle. The handle is black with yellow patterns and numbers that relate to the blade.
Micro-screwdriver 1569 ESD socket wrench SW 5.5 x 60
ESD / Screwdriver type: External hexagon / Socket wrench / Tip: SW5,5 / Shank-Ø: 7.8 mm / Shank length: 60 mm / Handle length: 97 mm

2 Products
Product No.: WE-1569ESD.SW5.0x60
12,55 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P PicoFinish
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 0.8 x 40
Screwdriver type: Slotted / Tip: SL0,8 / Thickness: 0.16 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 1.0 x 40
Screwdriver type: Slotted / Tip: SL1,0 / Thickness: 0.18 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 1.2 x 40
Screwdriver type: Slotted / Tip: SL1,2 / Thickness: 0.2 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 1.5 x 40
Screwdriver type: Slotted / Tip: SL1,5 / Thickness: 0.25 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 1.8 x 40
Screwdriver type: Slotted / Tip: SL1,8 / Thickness: 0.3 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 2.0 x 40
Screwdriver type: Slotted / Tip: SL2,0 / Thickness: 0.4 mm / Shank length: 40 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 2.5 x 50
Screwdriver type: Slotted / Tip: SL2,5 / Thickness: 0.4 mm / Shank length: 50 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 3.0 x 50
Screwdriver type: Slotted / Tip: SL3,0 / Thickness: 0.5 mm / Shank length: 50 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 3.5 x 60
Screwdriver type: Slotted / Tip: SL3,5 / Thickness: 0.6 mm / Shank length: 60 mm
The image shows a screwdriver with a long, flat steel blade. The handle is red and gray, featuring the
Slotted screwdriver 260P 4.0 x 60
Screwdriver type: Slotted / Tip: SL4,0 / Thickness: 0.8 mm / Shank length: 60 mm

10 Products
Product No.: 260P.50x3.0
from 5,35 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PicoFinish
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PH 000 x 40
Screwdriver type: Crosstip (Philips) / Tip: PH000 / Shank length: 40 mm
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PH 00 x 40
Screwdriver type: Crosstip (Philips) / Tip: PH00 / Shank length: 40 mm
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PH 0 x 50
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 50 mm
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PH 1 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 60 mm

4 Products
Product No.: 261P.PH0x50
from 5,90 EUR
excl. 19% tax
to the product family
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P PicoFinish
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 0.7 x 40
Screwdriver type: Hexagonal / Tip: SW0,7 / Shank length: 40 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 0.9 x 40
Screwdriver type: Hexagonal / Tip: SW0,9 / Shank length: 40 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 1.3 x 40
Screwdriver type: Hexagonal / Tip: SW1,3 / Shank length: 40 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 1.5 x 50
Screwdriver type: Hexagonal / Tip: SW1,5 / Shank length: 50 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 2.0 x 50
Screwdriver type: Hexagonal / Tip: SW2,0 / Shank length: 50 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 2.5 x 60
Screwdriver type: Hexagonal / Tip: SW2,5 / Shank length: 60 mm
The image shows a flathead screwdriver. The handle is red and black, with a non-slip surface. The blade is made of metal and is pointed.
Hexagon screwdriver 263P 3.0 x 60
Screwdriver type: Hexagonal / Tip: SW3,0 / Shank length: 60 mm

7 Products
Product No.: 263P.40x0.9
from 5,30 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P PicoFinish
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 2.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW2,0 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 2,5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW2,5 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 3.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW3,0 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 3.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW3,5 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 4.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW4,0 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 4.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW4,5 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 5.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,0 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 5.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,5 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 6.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW6,0 / Shank length: 60 mm
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P 7.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW7,0 / Shank length: 60 mm

10 Products
Product No.: 265P.60x5.0
from 10,75 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 SoftFinish®
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 2.0 x 65
Screwdriver type: Slotted / Tip: SL2,0 / Thickness: 0.4 mm / Shank length: 65 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 2.5 x 75
Screwdriver type: Slotted / Tip: SL2,5 / Thickness: 0.4 mm / Shank length: 75 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 3.0 x 100
Screwdriver type: Slotted / Tip: SL3,0 / Thickness: 0.5 mm / Shank length: 100 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 3.5 x 100
Screwdriver type: Slotted / Tip: SL3,5 / Thickness: 0.6 mm / Shank length: 100 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 4.0 x 100
Screwdriver type: Slotted / Tip: SL4,0 / Thickness: 0.8 mm / Shank length: 100 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 4.5 x 125
Screwdriver type: Slotted / Tip: SL4,5 / Thickness: 0.8 mm / Shank length: 125 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 5.5 x 125
Screwdriver type: Slotted / Tip: SL5,5 / Thickness: 1.0 mm / Shank length: 125 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 6.0 x 150
Screwdriver type: Slotted / Tip: SW6,0 / Thickness: 1.2 mm / Shank length: 150 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 6.5 x 150
Screwdriver type: Slotted / Tip: SW6,5 / Thickness: 1.2 mm / Shank length: 150 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 8.0 x 150
Screwdriver type: Slotted / Tip: SW8,0 / Thickness: 1.2 mm / Shank length: 150 mm
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 10.0 x 200
Screwdriver type: Slotted / Tip: SW10,0 / Thickness: 1.6 mm / Shank length: 200 mm

11 Products
Product No.: 302.100x4.0
from 4,00 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 SoftFinish®
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 4.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW4,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 5.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 5.5 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,5 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 6.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW6,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 7.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW7,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 8.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW8,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 9.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW9,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 10.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW10,0 / Shank length: 125 mm
The image shows a screwdriver with a black handle and red accents. The blade is silver and has a smooth, cylindrical shape. The handle reads
Hexagon socket wrench 341 13.0 x 125
Screwdriver type: External hexagon / Socket wrench / Tip: SW13,0 / Shank length: 125 mm

9 Products
Product No.: 341.125x5.5
from 8,30 EUR
excl. 19% tax
to the product family
The image shows a black screwdriver with a yellow imprint. The handle is ergonomically designed. The blade is long and straight, suitable for Phillips screws.
Preview: The image shows a black screwdriver with an ergonomic handle. The handle has green inscriptions and a curved end. The blade is narrow and straight, suitable for screws.
Preview: The image shows a black screwdriver with a yellow imprint. The handle is ergonomically designed. The blade is long and straight, suitable for Phillips screws.
Preview: The image shows a screwdriver with a black, non-slip handle. The handle has yellow lettering with information on the size and origin. The tip is straight and narrow.
TRITON 4723ESD PZD/ SDV Pozidriv / Supadriv
ESD-protective
The image shows a black screwdriver with an ergonomic handle. The handle has green inscriptions and a curved end. The blade is narrow and straight, suitable for screws.
Screwdriver PZD/SDV 0 x 60 TRITON 4723ESD
ESD / Screwdriver type: Pozidriv / Tip: PZD0 / Shank length: 80 mm
The image shows a black screwdriver with a yellow imprint. The handle is ergonomically designed. The blade is long and straight, suitable for Phillips screws.
Screwdriver PZD/SDV 1 x 80 TRITON 4723ESD
ESD / Screwdriver type: Pozidriv / Tip: PZD1 / Shank length: 80 mm
The image shows a screwdriver with a black, non-slip handle. The handle has yellow lettering with information on the size and origin. The tip is straight and narrow.
Screwdriver PZD/SDV 2 x 100 TRITON 4723ESD
ESD / Screwdriver type: Pozidriv / Tip: PZD2 / Shank length: 100 mm

3 Products
Product No.: 4723ESD.PZD/SDV1x80
from 4,15 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
XONIC 4882X-ESD PH / Cross-tip
ESD-protective
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
Phillips screwdriver XONIC 4882X-ESD PH 000 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH000 / Shank length: 60 mm
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
Phillips screwdriver XONIC 4882X-ESD PH 00 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH00 / Shank length: 60 mm
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
Phillips screwdriver XONIC 4882X-ESD PH 0 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
The image shows a screwdriver with a black handle and a long, narrow metal tip. The tip has a cross-shaped opening for screws.
Phillips screwdriver XONIC 4882X-ESD PH 01 x 80
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm

4 Products
Product No.: 4882X-ESD000x60
from 4,10 EUR
excl. 19% tax
to the product family
The image shows a black box with foam-padded interior. Inside, there is a yellow screwdriver and various removable bits.
-10%
-10%
SYSTEM 4 ESD set 27-piece
ESD / Screwdriver type: bit holder
SYSTEM 4 ESD set, 26-piece, ESD handle SYSTEM 4
with bit holder blade length variably adjustable
and 24 bits + metal storage box

Product No.: 7000EB26ESD.Set
RRP 104,25 EUR
Only 93,83 EUR
excl. 19% tax
Show product
The image shows a holder with six screwdrivers. They have black handles with yellow details. The screwdrivers vary in length and have different tip shapes.
ESD Electronic screwdriver set 6-pcs 1578A/6
ESD / Screwdriver type: Slotted / Crosstip (Philips)
Electronics screwdriver set 1578A/6-ESD
6 pieces + rack consisting of:
1578A-ESD1.2x40 / ESD1. 5x40/ESD1. 8x60/ESD2.5x80
1550ESD.PH0x60; 1550ESD.PH1x80
++ WERA micro - ESD version++

Product No.: WE-1578A/6-ESD
36,30 EUR
excl. 19% tax
Show product
The image shows a series of black screwdrivers in various sizes, arranged from left to right. Each has a long, thin metal shaft and an ergonomic handle.
Preview: The image shows a series of black screwdrivers in various sizes, arranged from left to right. Each has a long, thin metal shaft and an ergonomic handle.
Preview: The image shows four screwdrivers with black handles and yellow prints. The blades vary in length and are pointed, suitable for delicate work on electronics.
XONIC ESD screwdriver sets 4-piece SL/PH
ESD-protective
The image shows a series of black screwdrivers in various sizes, arranged from left to right. Each has a long, thin metal shaft and an ergonomic handle.
ESD screwdriver set 7-piece XONIC
ESD / Screwdriver type: Slotted / Crosstip (Philips)
The image shows four screwdrivers with black handles and yellow prints. The blades vary in length and are pointed, suitable for delicate work on electronics.
ESD screwdriver set 4-piece XONIC
ESD / Screwdriver type: Crosstip (Philips) / Slotted

2 Products
Product No.: 4883X-ESD
from 18,25 EUR
excl. 19% tax
to the product family
17 to 32 (from a total of 89)