Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Our Brands

CK Piergiacomi Wera Wiha
The image shows a tape measure or a caliper in silver color. It is long and has marked numbers for different lengths, probably in millimeters or centimeters.
SYSTEM 6 bit holder C6, 3.E6, 3
Screwdriver type: bit holder / Hexagonal / Shank-Ø: 6.0 mm
Bit holder socket for C 6.3 + E 6.3 (1/4") bits
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 7802
14,95 EUR
excl. 19% tax
Show product
The image shows a silver wrench with a length of about 20 cm. At one end, there is a square head, which bears the brand
SYSTEM 6 adapter blade 1/4"
Screwdriver type: Hexagonal / inner square / Tip: 635
Adapter blade for wrench socket
with 1/4" inner square
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 7803
13,25 EUR
excl. 19% tax
Show product
The image shows a black screwdriver with yellow grip details. The handle has ergonomic shapes for better grip. The tip is narrow and suitable for Phillips screws.
Preview: The image shows a screwdriver with a long, narrow metal head and an ergonomically shaped handle. The handle is black with yellow accents and textured zones.
Preview: The image shows a black screwdriver with yellow grip details. The handle has ergonomic shapes for better grip. The tip is narrow and suitable for Phillips screws.
Preview: The image shows a screwdriver with a black handle and yellow accents. The blade is long and shiny, suitable for Phillips screws. The handle is ergonomically shaped for better grip.
Micro-screwdriver 1550 ESD cross-tip
ESD-protective
Micro-screwdriver 1550 PH 00 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH00 / Shank-Ø: 2.5 mm / Shank length: 60 mm / Handle length: 97 mm
Micro-screwdriver 1550 PH 0 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank-Ø: 3.0 mm / Shank length: 60 mm / Handle length: 97 mm
Micro-screwdriver 1550 PH 1 x 80
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank-Ø: 4.0 mm / Shank length: 80 mm / Handle length: 97 mm

3 Products
Product No.: WE-1550ESD.PH0x60
from 5,40 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Preview: The image shows a screwdriver with a black handle and yellow details. The blade is straight, metallic, and has a star-shaped tip. There are size markings on the handle.
Preview: The image shows a screwdriver with an ergonomic, black-and-yellow handle. The tip is star-shaped and has a narrow metal blade. The brand logo and model name are visible.
Preview: The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Micro-screwdriver 1567 ESD TORX
ESD-protective
Micro-screwdriver 1567 TX 4 x 40
ESD / Screwdriver type: Torx / Tip: TX4 / Shank-Ø: 2.5 mm / Shank length: 40 mm / Handle length: 97 mm
Micro-screwdriver 1567 TX 5 x 40
ESD / Screwdriver type: Torx / Tip: TX5 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm
Micro-screwdriver 1567 TX 6 x 40
ESD / Screwdriver type: Torx / Tip: TX6 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm

3 Products
Product No.: WE-1567ESD.TX6x40
from 7,10 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, thin metal shaft and a rubber handle. The handle is black with yellow patterns and numbers that relate to the blade.
Preview: The image shows a screwdriver with a long, narrow metal head and a non-slip handle in black and yellow. The handle has a textured surface for better grip.
Preview: The image shows a screwdriver with a long, thin metal shaft and a rubber handle. The handle is black with yellow patterns and numbers that relate to the blade.
Micro-screwdriver 1569 ESD socket wrench
ESD-protective
Micro-screwdriver 1569 ESD socket wrench SW 5.0 x 60
ESD / Screwdriver type: External hexagon / Socket wrench / Tip: SW5,0 / Shank-Ø: 7.0 mm / Shank length: 60 mm / Handle length: 97 mm
Micro-screwdriver 1569 ESD socket wrench SW 5.5 x 60
ESD / Screwdriver type: External hexagon / Socket wrench / Tip: SW5,5 / Shank-Ø: 7.8 mm / Shank length: 60 mm / Handle length: 97 mm

2 Products
Product No.: WE-1569ESD.SW5.5x60
12,35 EUR
excl. 19% tax
to the product family
The image shows a series of screwdrivers in various sizes. The handles are gray with red ends. The heads are narrow and metallic, suitable for fine screws.
Preview: The image shows a set of six screwdrivers in a holder. The handles are gray with red accents. The screwdrivers have narrow, long tips pointing in different directions.
Preview: The image shows a series of screwdrivers in various sizes. The handles are gray with red ends. The heads are narrow and metallic, suitable for fine screws.
Preview: The image shows six screwdrivers in a holder. The handles are red and gray, the blades are long and silver. They are neatly lined up on a black base.
Preview: The image shows a stand with six electric toothbrushes. Each brush has a red handle and a gray design. They are mounted on a stable black base.
Preview: The image shows six screwdrivers with red handles and silver blades, standing on a black stand. The handles are ergonomically shaped and have a non-slip surface.
Preview: The image shows a set of six screwdrivers in various sizes. The handles are black with red accents. They are standing on a black holder.
Wiha PicoFinish® screwdriver sets
Slotted/Phillips screwdriver set, 6-piece 260P
Screwdriver type: Slotted / Crosstip (Philips)
Slotted/Phillips screwdriver set, 7-piece 260P
Screwdriver type: Slotted / Crosstip (Philips)
Hexagon ballpoint screwdriver set, 6-piece 264P
Screwdriver type: Hexagonal / Ballpoint
Hexagon socket wrench set, 6-piece 265P
Screwdriver type: External hexagon / Socket wrench
TORX® screwdriver set, 6-piece 267P
Screwdriver type: Torx
TORX® screwdriver set, 6-piece 267P
Screwdriver type: Torx

6 Products
Product No.: 260P.K7
from 31,45 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, slender steel end and an ergonomically shaped handle. The handle is red and black and features the logo
Phillips screwdriver 261P PicoFinish
Phillips screwdriver 261P PH 000 x 40
Screwdriver type: Crosstip (Philips) / Tip: PH000 / Shank length: 40 mm
Phillips screwdriver 261P PH 00 x 40
Screwdriver type: Crosstip (Philips) / Tip: PH00 / Shank length: 40 mm
Phillips screwdriver 261P PH 0 x 50
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 50 mm
Phillips screwdriver 261P PH 1 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 60 mm

4 Products
Product No.: 261P.PH0x50
from 5,70 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a long, slender, metallic head and an ergonomic handle. The handle is black with red accents and has a round support.
Hexagon socket wrench 265P PicoFinish
Hexagon socket wrench 265P 2.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW2,0 / Shank length: 60 mm
Hexagon socket wrench 265P 2,5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW2,5 / Shank length: 60 mm
Hexagon socket wrench 265P 3.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW3,0 / Shank length: 60 mm
Hexagon socket wrench 265P 3.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW3,5 / Shank length: 60 mm
Hexagon socket wrench 265P 4.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW4,0 / Shank length: 60 mm
Hexagon socket wrench 265P 4.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW4,5 / Shank length: 60 mm
Hexagon socket wrench 265P 5.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,0 / Shank length: 60 mm
Hexagon socket wrench 265P 5.5 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW5,5 / Shank length: 60 mm
Hexagon socket wrench 265P 6.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW6,0 / Shank length: 60 mm
Hexagon socket wrench 265P 7.0 x 60
Screwdriver type: External hexagon / Socket wrench / Tip: SW7,0 / Shank length: 60 mm

10 Products
Product No.: 265P.60x4.0
from 10,40 EUR
excl. 19% tax
to the product family
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 Hexagon ball head combination blade
SYSTEM 4 hexagon ballpoint - hexagon 1.3 1.3
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,3/SW1,3 / Shank-Ø: 4.0 mm
SYSTEM 4 hexagon ballpoint - hexagon 1.5 1.5
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,5/SW1,5 / Shank-Ø: 4.0 mm
SYSTEM 4 hexagon ballpoint - hexagon 2.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,0/SW2,0 / Shank-Ø: 4.0 mm
SYSTEM 4 hexagon ballpoint - hexagon 2.5 2.5
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,5/SW2,5 / Shank-Ø: 4.0 mm
SYSTEM 4 hexagon ballpoint - hexagon 3.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0/SW3,0 / Shank-Ø: 4.0 mm
SYSTEM 4 hexagon ballpoint - hexagon 4.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW4,0/SW4,0 / Shank-Ø: 4.0 mm

6 Products
Product No.: 269.SK25
9,00 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with an ergonomic, yellow handle. The handle has a black rubber surface that provides better grip. At the top end, there is a metal tip.
SYSTEM 4 SoftFinish® telescopic ESD 4.0
ESD / Screwdriver type: bit holder
ESD SYSTEM 4 - telescopic handle ESD
++ Wiha Softfinish ESD++

Product No.: 2691ESD.4
16,30 EUR
excl. 19% tax
Show product
The image displays a black tool roll with red accents. Inside the roll, there are several screwdriver bits, which are slender and vary in length, as well as a yellow screwdriver with a black handle.
SYSTEM 4 Set in roll-up bag
ESD / Screwdriver type: bit holder
SYSTEM 4 ESD reversible blade set, 11-piece., ESD
incl. roll bag

Product No.: 2691ESD.Set
94,30 EUR
excl. 19% tax
Show product
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 Slotted reversible blade
SYSTEM 6 slotted reversible blade 4.0 6.0
Screwdriver type: Slotted / Tip: SL4,0/SL6,0 / Shank-Ø: 6.0 mm
SYSTEM 6 slotted reversible blade 5.5 6.5
Screwdriver type: Slotted / Tip: SL5,5/SL6,5 / Shank-Ø: 6.0 mm
SYSTEM 6 slotted reversible blade 3.5 4.5
Screwdriver type: Slotted / Tip: SL3,5/SL4,5 / Shank-Ø: 6.0 mm

3 Products
Product No.: 284.35/45
7,70 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a narrow, flat head. The handle is striped red and black, ergonomically shaped for better grip. The blade is silver-colored and relatively long.
Slotted screwdriver 302 SoftFinish®
Slotted screwdriver 302 2.0 x 65
Screwdriver type: Slotted / Tip: SL2,0 / Thickness: 0.4 mm / Shank length: 65 mm
Slotted screwdriver 302 2.5 x 75
Screwdriver type: Slotted / Tip: SL2,5 / Thickness: 0.4 mm / Shank length: 75 mm
Slotted screwdriver 302 3.0 x 100
Screwdriver type: Slotted / Tip: SL3,0 / Thickness: 0.5 mm / Shank length: 100 mm
Slotted screwdriver 302 3.5 x 100
Screwdriver type: Slotted / Tip: SL3,5 / Thickness: 0.6 mm / Shank length: 100 mm
Slotted screwdriver 302 4.0 x 100
Screwdriver type: Slotted / Tip: SL4,0 / Thickness: 0.8 mm / Shank length: 100 mm
Slotted screwdriver 302 4.5 x 125
Screwdriver type: Slotted / Tip: SL4,5 / Thickness: 0.8 mm / Shank length: 125 mm
Slotted screwdriver 302 5.5 x 125
Screwdriver type: Slotted / Tip: SL5,5 / Thickness: 1.0 mm / Shank length: 125 mm
Slotted screwdriver 302 6.0 x 150
Screwdriver type: Slotted / Tip: SW6,0 / Thickness: 1.2 mm / Shank length: 150 mm
Slotted screwdriver 302 6.5 x 150
Screwdriver type: Slotted / Tip: SW6,5 / Thickness: 1.2 mm / Shank length: 150 mm
Slotted screwdriver 302 8.0 x 150
Screwdriver type: Slotted / Tip: SW8,0 / Thickness: 1.2 mm / Shank length: 150 mm
Slotted screwdriver 302 10.0 x 200
Screwdriver type: Slotted / Tip: SW10,0 / Thickness: 1.6 mm / Shank length: 200 mm

11 Products
Product No.: 302.65x2.0
from 3,85 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a red-yellow handle. The handle has an ergonomic shape and is labeled with
Slotted screwdriver 320N VDE SoftFinish® electric
Slotted screwdriver VDE 320N 2.0 x 60
Screwdriver type: Slotted / Tip: SL2,0 / Thickness: 0.4 mm / Shank length: 60 mm
Slotted screwdriver VDE 320N 2.5 x 75
Screwdriver type: Slotted / Tip: SL2,5 / Thickness: 0.4 mm / Shank length: 75 mm
Slotted screwdriver VDE 320N 3.0 x 100
Screwdriver type: Slotted / Tip: SL3,0 / Thickness: 0.5 mm / Shank length: 100 mm
Slotted screwdriver VDE 320N 3.5 x 100
Screwdriver type: Slotted / Tip: SL3,5 / Thickness: 0.6 mm / Shank length: 100 mm
Slotted screwdriver VDE 320N 4.0 x 100
Screwdriver type: Slotted / Tip: SL4,0 / Thickness: 0.8 mm / Shank length: 100 mm
Slotted screwdriver VDE 320N 4.5 x 125
Screwdriver type: Slotted / Tip: SL4,5 / Thickness: 1.0 mm / Shank length: 125 mm
Slotted screwdriver VDE 320N 4.5 x 175
Screwdriver type: Slotted / Tip: SL4,5 / Thickness: 1.0 mm / Shank length: 175 mm
Slotted screwdriver VDE 320N 5.5 x 125
Screwdriver type: Slotted / Tip: SL5,5 / Thickness: 1.0 mm / Shank length: 125 mm
Slotted screwdriver VDE 320N 5.5 x 175
Screwdriver type: Slotted / Tip: SL5,5 / Thickness: 1.0 mm / Shank length: 175 mm
Slotted screwdriver VDE 320N 6.0 x 150
Screwdriver type: Slotted / Tip: SL6,0 / Thickness: 1.2 mm / Shank length: 150 mm
Slotted screwdriver VDE 320N 6.5 x 150
Screwdriver type: Slotted / Tip: SL6,5 / Thickness: 1.2 mm / Shank length: 150 mm
Slotted screwdriver VDE 320N 8.0 x 175
Screwdriver type: Slotted / Tip: SL8,0 / Thickness: 1.2 mm / Shank length: 175 mm

12 Products
Product No.: 320N.60x2.0
from 6,45 EUR
excl. 19% tax
to the product family
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE SoftFinish® electric
Phillips screwdriver 321N VDE PH 0 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
Phillips screwdriver 321N VDE PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
Phillips screwdriver 321N VDE PH 2 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 100 mm
Phillips screwdriver 321N VDE PH 3 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH3 / Shank length: 150 mm
Phillips screwdriver 321N VDE PH 4 x 200
Screwdriver type: Crosstip (Philips) / Tip: PH4 / Shank length: 200 mm

5 Products
Product No.: 321N.PH2x100
from 7,55 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a red and black handle. The handle has a non-slip surface, and the blade is long and narrow, ideal for screwing.
TORX® screwdriver 362 SoftFinish®
TORX screwdriver 362 TX 04 x 60
Screwdriver type: Torx / Tip: TX04 / Shank length: 60 mm
TORX screwdriver 362 TX 05 x 60
Screwdriver type: Torx / Tip: TX05 / Shank length: 60 mm
TORX screwdriver 362 TX 06 x 60
Screwdriver type: Torx / Tip: TX06 / Shank length: 60 mm
TORX screwdriver 362 TX 07 x 60
Screwdriver type: Torx / Tip: TX07 / Shank length: 60 mm
TORX screwdriver 362 TX 08 x 60
Screwdriver type: Torx / Tip: TX08 / Shank length: 60 mm
TORX screwdriver 362 TX 09 x 60
Screwdriver type: Torx / Tip: TX09 / Shank length: 60 mm
TORX screwdriver 362 TX 10 x 80
Screwdriver type: Torx / Tip: TX10 / Shank length: 80 mm
TORX screwdriver 362 TX 15 x 80
Screwdriver type: Torx / Tip: TX15 / Shank length: 80 mm
TORX screwdriver 362 TX 20 x 100
Screwdriver type: Torx / Tip: TX20 / Shank length: 100 mm

9 Products
Product No.: 362.TX10x80
from 5,95 EUR
excl. 19% tax
to the product family
33 to 48 (from a total of 91)