Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Brands on sale

CK Piergiacomi Wera Wiha
The image depicts a long, narrow, silver-colored object with a ribbed surface and a slightly rounded end. It has a regular, uniform structure.
SYSTEM 4 Slotted reversible blade
SYSTEM 4 slotted reversible blade 1.5 3.0
Screwdriver type: Slotted / Tip: SL1,5/SL3,0 / Thickness: 0.25/0.5 mm / Shank-Ø: 4.0 mm
SYSTEM 4 slotted reversible blade 2.0 3.5
Screwdriver type: Slotted / Tip: SL2,0/SL3,5 / Thickness: 0.4/0.6 mm / Shank-Ø: 4.0 mm
SYSTEM 4 slotted reversible blade 2.5 4.0
Screwdriver type: Slotted / Tip: SL2,5/SL4,0 / Thickness: 0.4/0.8 mm / Shank-Ø: 4.0 mm

3 Products
Product No.: 269.15/30
9,35 EUR
excl. 19% tax
to the product family
The image shows a long, narrow metal cylinder with a ridged surface. It features a thin, protruding part at each end. The surface appears cool and smooth.
SYSTEM 4 Phillips reversible blade
SYSTEM 4 Phillips reversible blade PH000.PH00
Screwdriver type: Crosstip (Philips) / Tip: PH000/PH00 / Shank-Ø: 4.0 mm
SYSTEM 4 Phillips reversible blade PH0.PH1
Screwdriver type: Crosstip (Philips) / Tip: PH0/PH1 / Shank-Ø: 4.0 mm

2 Products
Product No.: 269.PH0/1
9,35 EUR
excl. 19% tax
to the product family
The image shows a long, silver pen with a non-slip surface. One end features the tip, while the other end is narrow and pointed.
SYSTEM 4 Pozidriv reversible blade PZ0.PZ1
Screwdriver type: Pozidriv / Tip: PZ0/PZ1 / Shank-Ø: 4.0 mm
Pozidriv reversible blade PZ 0 / PZ 1
Length 120 mm ++ Wiha SYSTEM 4++
++ Wiha SYSTEM 4++

Product No.: 269.PZ0/1
9,35 EUR
excl. 19% tax
Show product
The image shows a long, slender metal object that is wider at one end. It has a smooth surface with small, round indentations along its length.
SYSTEM 4 Bit holder
Screwdriver type: bit holder / Hexagonal / Shank-Ø: 4.0 mm
Bit holder for Wiha system 4
Length 135 mm ++ Wiha SYSTEM 4 ++

Product No.: U759.00
13,10 EUR
excl. 19% tax
Show product
The image shows a silver pen with a pointed tip. The pen features markings and inscriptions, some of which represent technical information.
SYSTEM 6 Combined slotted-Phillips reversible blade
SYSTEM 6 combined slotted-Phillips reversible blade 4.0.PH1
Screwdriver type: Slotted / Crosstip (Philips) / Tip: PH1/4 / Shank-Ø: 6.0 mm / Tip: / PH1/4
SYSTEM 6 combined slotted-Phillips reversible blade 6.0.PH2
Screwdriver type: Slotted / Crosstip (Philips) / Tip: PH2/6 / Shank-Ø: 6.0 mm / Tip: / PH2/6

2 Products
Product No.: 284.60/PH2
8,00 EUR
excl. 19% tax
to the product family
The image displays a screwdriver with an elongated, silver-colored handle. At the ends, there are two different blades: one for PZ1 and one for PZ2.
SYSTEM 6 Pozidriv reversible blade
SYSTEM 6 Pozidriv reversible blade PZ1.PZ2
Screwdriver type: Pozidriv / Tip: PZ1/PZ2 / Shank-Ø: 6.0 mm
SYSTEM 6 Pozidriv reversible blade PZ2.PZ3
Screwdriver type: Pozidriv / Tip: PZ2/PZ3 / Shank-Ø: 6.0 mm

2 Products
Product No.: 284.PZ1/2
8,00 EUR
excl. 19% tax
to the product family
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® Tamper-resistant reversible blade
SYSTEM 6 Torx® Tamper-resistant T6H.T8H
Screwdriver type: Torx tamper-resistant (with hole) / Tip: T6H/T8H / Shank-Ø: 6.0 mm
SYSTEM 6 Torx® Tamper-resistant T7H.T9H
Screwdriver type: Torx tamper-resistant (with hole) / Tip: T7H/T9H / Shank-Ø: 6.0 mm
SYSTEM 6 Torx® Tamper-resistant T10H.T15H
Screwdriver type: Torx tamper-resistant (with hole) / Tip: T10H/T15H / Shank-Ø: 6.0 mm
SYSTEM 6 Torx® Tamper-resistant T20H.T25H
Screwdriver type: Torx tamper-resistant (with hole) / Tip: T20H/T25H / Shank-Ø: 6.0 mm
SYSTEM 6 Torx® Tamper-resistant T30H.T40H
Screwdriver type: Torx tamper-resistant (with hole) / Tip: T30H/T40H / Shank-Ø: 6.0 mm

5 Products
Product No.: 284.T20H/25H
8,95 EUR
excl. 19% tax
to the product family
The image shows a black hex key with multiple fold-out tools. It has red and gray accents and features the
Preview: The image shows a compact tool handle with several fold-out hex keys. The handle is black with green accents and features the ?wiha? logo.
Preview: The image shows a black hex key with multiple fold-out tools. It has red and gray accents and features the
Preview: The image shows a compact black hex key with green grip sides. It is foldable and includes several hex keys in different sizes.
PocketStar® fold-out holder
TORX® PocketStar® fold-out holder
Screwdriver type: Torx
Hexagon ballpoint MagicRing® PocketStar® fold-out holder
Screwdriver type: Hexagonal / Ballpoint
TORX® Tamper resistant PocketStar® fold-out holder
Screwdriver type: Torx tamper-resistant (with hole)

3 Products
Product No.: 369R.P7
from 25,90 EUR
excl. 19% tax
to the product family
The image displays a set of hex keys. They are made of silver metal and are arranged in various lengths. The handle is black and yellow with the inscription
MagicRing® Hexagon L-key set (inch version)
Screwdriver type: Hexagonal
Hexagonal ball head MagicRing, 14 pcs.
matt chrome-plated, inch version in blister

Product No.: 369R.HZ14
53,65 EUR
excl. 19% tax
Show product
81 to 89 (from a total of 89)