Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Brands on sale

The image shows a screwdriver with an ergonomic, black-and-yellow handle. The tip is star-shaped and has a narrow metal blade. The brand logo and model name are visible.
Preview: The image shows a screwdriver with a black handle and yellow details. The blade is straight, metallic, and has a star-shaped tip. There are size markings on the handle.
Preview: The image shows a screwdriver with an ergonomic, black-and-yellow handle. The tip is star-shaped and has a narrow metal blade. The brand logo and model name are visible.
Preview: The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Micro-screwdriver 1567 ESD TORX
ESD-protective
The image shows a screwdriver with a black handle and yellow details. The blade is straight, metallic, and has a star-shaped tip. There are size markings on the handle.
Micro-screwdriver 1567 TX 4 x 40
ESD / Screwdriver type: Torx / Tip: TX4 / Shank-Ø: 2.5 mm / Shank length: 40 mm / Handle length: 97 mm
The image shows a screwdriver with an ergonomic, black-and-yellow handle. The tip is star-shaped and has a narrow metal blade. The brand logo and model name are visible.
Micro-screwdriver 1567 TX 5 x 40
ESD / Screwdriver type: Torx / Tip: TX5 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm
The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Micro-screwdriver 1567 TX 6 x 40
ESD / Screwdriver type: Torx / Tip: TX6 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm

3 Products
Product No.: WE-1567ESD.TX5x40
from 7,25 EUR
excl. 19% tax
to the product family
The image shows a narrow screwdriver with a black, non-slip handle and yellow accents. The blade is straight and thin, suitable for small screws.
Preview: The image shows a slim, black-and-yellow screwdriver. The handle is ergonomically designed and provides a non-slip surface. The blade is straight and narrow.
Preview: The image shows a narrow screwdriver with a black, non-slip handle and yellow accents. The blade is straight and thin, suitable for small screws.
Preview: The image shows a slim screwdriver. The handle is black with yellow accents and has a non-slip surface. The blade is straight and made of metal, suitable for screws.
Preview: The image shows a black cross screwdriver with yellow accents. The handle is ergonomically shaped, and the blade is straight and metallically shiny.
Preview: The image shows a screwdriver with a black handle featuring yellow and gray patterns. The tip is slim and straight, suitable for screws.
Preview: The image shows a screwdriver with a black handle and yellow accents. The blade is thin and straight. The handle has an ergonomic shape for a better grip.
Preview: The image shows a screwdriver with a slim, long metal part and a handle-like, rubberized grip in black and yellow. The handle has an ergonomic shape for better grip.
Preview: The image shows a blue screwdriver with yellow accents. It has a long, straight head and a comfortable handle that ensures good handling. The handle is designed to be slip-resistant.
Slotted micro-screwdriver 1578A ESD
ESD-protective
The image shows a slim, black-and-yellow screwdriver. The handle is ergonomically designed and provides a non-slip surface. The blade is straight and narrow.
Slotted micro-screwdriver 1578A 1.2 x 40
ESD / Screwdriver type: Slotted / Tip: SL1,2 / Thickness: 0.25 mm / Shank-Ø: 2.0 mm / Shank length: 40 mm / Handle length: 97 mm
The image shows a narrow screwdriver with a black, non-slip handle and yellow accents. The blade is straight and thin, suitable for small screws.
Slotted micro-screwdriver 1578A1.5 x 40
ESD / Screwdriver type: Slotted / Tip: SL1,5 / Thickness: 0.23 mm / Shank-Ø: 2.0 mm / Shank length: 40 mm / Handle length: 97 mm
The image shows a slim screwdriver. The handle is black with yellow accents and has a non-slip surface. The blade is straight and made of metal, suitable for screws.
Slotted micro-screwdriver 1578A 1.8 x 60
ESD / Screwdriver type: Slotted / Tip: SL1,8 / Thickness: 0.3 mm / Shank-Ø: 2.0 mm / Shank length: 60 mm / Handle length: 97 mm
The image shows a black cross screwdriver with yellow accents. The handle is ergonomically shaped, and the blade is straight and metallically shiny.
Slotted micro-screwdriver 1578A 2.0 x 60
ESD / Screwdriver type: Slotted / Tip: SL2,0 / Thickness: 0.4 mm / Shank-Ø: 2.5 mm / Shank length: 60 mm / Handle length: 97 mm
The image shows a screwdriver with a black handle featuring yellow and gray patterns. The tip is slim and straight, suitable for screws.
Slotted micro-screwdriver 1578A 2.5 x 80
ESD / Screwdriver type: Slotted / Tip: SL2,5 / Thickness: 0.4 mm / Shank-Ø: 2.5 mm / Shank length: 80 mm / Handle length: 97 mm
The image shows a screwdriver with a black handle and yellow accents. The blade is thin and straight. The handle has an ergonomic shape for a better grip.
Slotted micro-screwdriver 1578A 3.0 x 80
ESD / Screwdriver type: Slotted / Tip: SL3,0 / Thickness: 0.5 mm / Shank-Ø: 3.0 mm / Shank length: 80 mm / Handle length: 97 mm
The image shows a screwdriver with a slim, long metal part and a handle-like, rubberized grip in black and yellow. The handle has an ergonomic shape for better grip.
Slotted micro-screwdriver 1578A 3.5 x 80
ESD / Screwdriver type: Slotted / Tip: SL3,5 / Thickness: 0.6 mm / Shank-Ø: 4.0 mm / Shank length: 80 mm / Handle length: 97 mm
The image shows a blue screwdriver with yellow accents. It has a long, straight head and a comfortable handle that ensures good handling. The handle is designed to be slip-resistant.
Slotted micro-screwdriver 1578A 4.0 x 80
ESD / Screwdriver type: Slotted / Tip: SL4,0 / Thickness: 0.8 mm / Shank-Ø: 4.0 mm / Shank length: 80 mm / Handle length: 97 mm

8 Products
Product No.: WE-1578A-ESD1.5x40
from 4,30 EUR
excl. 19% tax
to the product family
The image shows a collection of hex keys in various sizes. They are made of metal and slightly curved, arranged in descending order of size, with a green holder.
TORX® screwdriver set
Screwdriver type: Torx
Wrench set, Torx, 13-PC., ProStar holder,
Titanium silver in blister

Product No.: 366.SZ13TS
55,90 EUR
excl. 19% tax
Show product
The image shows a yellow screwdriver with a slightly curved, narrow tip. The handle has a non-slip coating and bears the logo
Lifter ESD 3.5 x 50
ESD / Screwdriver type: Remover / Tip: 3.5/1 / Shank length: 50 mm
ESD lifter 3.5 x 50 mm, for removing
tight components from printed circuit boards
++Wiha screwdriver PicoFinish ESD++

Product No.: 278P.1001
11,05 EUR
excl. 19% tax
Show product
The image displays a black tool roll with red accents. Inside the roll, there are several screwdriver bits, which are slender and vary in length, as well as a yellow screwdriver with a black handle.
-10%
-10%
SYSTEM 4 Set in roll-up bag
ESD / Screwdriver type: bit holder
SYSTEM 4 ESD reversible blade set, 11-piece., ESD
incl. roll bag

Product No.: 2691ESD.Set
RRP 97,85 EUR
Only 88,07 EUR
excl. 19% tax
Show product
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 Hexagon ball head combination blade
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 1.3 1.3
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,3/SW1,3 / Shank-Ø: 4.0 mm
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 1.5 1.5
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,5/SW1,5 / Shank-Ø: 4.0 mm
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 2.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,0/SW2,0 / Shank-Ø: 4.0 mm
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 2.5 2.5
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,5/SW2,5 / Shank-Ø: 4.0 mm
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 3.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0/SW3,0 / Shank-Ø: 4.0 mm
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 4.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW4,0/SW4,0 / Shank-Ø: 4.0 mm

6 Products
Product No.: 269.SK15
9,35 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX® screwdriver 267P PicoFinish
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 01 x 40
Screwdriver type: Torx / Tip: TX01 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 02 x 40
Screwdriver type: Torx / Tip: TX02 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 03 x 40
Screwdriver type: Torx / Tip: TX03 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 04 x 40
Screwdriver type: Torx / Tip: TX04 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 05 x 40
Screwdriver type: Torx / Tip: TX05 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 06 x 40
Screwdriver type: Torx / Tip: TX06 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 07 x 40
Screwdriver type: Torx / Tip: TX07 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 08 x 40
Screwdriver type: Torx / Tip: TX08 / Shank length: 40 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 09 x 50
Screwdriver type: Torx / Tip: TX09 / Shank length: 50 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 10 x 50
Screwdriver type: Torx / Tip: TX10 / Shank length: 50 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 15 x 60
Screwdriver type: Torx / Tip: TX15 / Shank length: 60 mm
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 20 x 60
Screwdriver type: Torx / Tip: TX20 / Shank length: 60 mm

12 Products
Product No.: 267P.TX01x40
from 8,55 EUR
excl. 19% tax
to the product family
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T1.T2
Screwdriver type: Torx / Tip: T1/T2 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T3.T4
Screwdriver type: Torx / Tip: T3/T4 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T5.T6
Screwdriver type: Torx / Tip: T5/T6 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T6.T8
Screwdriver type: Torx / Tip: T6/T8 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T7.T9
Screwdriver type: Torx / Tip: T7/T9 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T10.T15
Screwdriver type: Torx / Tip: T10/T15 / Shank-Ø: 4.0 mm
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T15.T20
Screwdriver type: Torx / Tip: T15/T20 / Shank-Ø: 4.0 mm

7 Products
Product No.: 269.T06/08
9,35 EUR
excl. 19% tax
to the product family
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 Slotted reversible blade
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 slotted reversible blade 3.5 4.5
Screwdriver type: Slotted / Tip: SL3,5/SL4,5 / Shank-Ø: 6.0 mm
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 slotted reversible blade 4.0 6.0
Screwdriver type: Slotted / Tip: SL4,0/SL6,0 / Shank-Ø: 6.0 mm
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 slotted reversible blade 5.5 6.5
Screwdriver type: Slotted / Tip: SL5,5/SL6,5 / Shank-Ø: 6.0 mm

3 Products
Product No.: 284.35/45
8,00 EUR
excl. 19% tax
to the product family
The image shows a stainless steel ruler with a measurement scale. It has two sharp ends and a continuous, straight edge. The measurements are marked in millimeters and centimeters.
SYSTEM 6 Phillips reversible blade
The image shows a stainless steel ruler with a measurement scale. It has two sharp ends and a continuous, straight edge. The measurements are marked in millimeters and centimeters.
SYSTEM 6 Phillips reversible blade PH1.PH2
Screwdriver type: Crosstip (Philips) / Crosstip (Philips) / Tip: PH1/PH2 / Shank-Ø: 6.0 mm
The image shows a stainless steel ruler with a measurement scale. It has two sharp ends and a continuous, straight edge. The measurements are marked in millimeters and centimeters.
SYSTEM 6 Phillips reversible blade PH2.PH3
Screwdriver type: Crosstip (Philips) / Crosstip (Philips) / Tip: PH2/PH3 / Shank-Ø: 6.0 mm

2 Products
Product No.: 284.PH1/2
8,00 EUR
excl. 19% tax
to the product family
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 Hexagon ball head combination blade
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 2.5 2.5
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,5/SW2,5 / Shank-Ø: 6.0 mm
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 3.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0/SW3,0 / Shank-Ø: 6.0 mm
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 4.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW4,0/SW4,0 / Shank-Ø: 6.0 mm
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 5.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW5,0/SW5,0 / Shank-Ø: 6.0 mm
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 6.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW6,0/SW6,0 / Shank-Ø: 6.0 mm

5 Products
Product No.: 284.SK50
8,00 EUR
excl. 19% tax
to the product family
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T6.T8
Screwdriver type: Torx / Tip: T6/T8 / Shank-Ø: 6.0 mm
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T7.T9
Screwdriver type: Torx / Tip: T7/T9 / Shank-Ø: 6.0 mm
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T10.T15
Screwdriver type: Torx / Tip: T10/T15 / Shank-Ø: 6.0 mm
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T20.T25
Screwdriver type: Torx / Tip: T20/T25 / Shank-Ø: 6.0 mm
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T30.T38
Screwdriver type: Torx / Tip: T30/T40 / Shank-Ø: 6.0 mm

5 Products
Product No.: 284.T06/08
8,00 EUR
excl. 19% tax
to the product family
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 SoftFinish®
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 0 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 1 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 100 mm
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 2 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 100 mm
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 2 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 150 mm
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 PH 3 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH3 / Shank length: 150 mm

6 Products
Product No.: 311.PH0x60
from 5,85 EUR
excl. 19% tax
to the product family
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE SoftFinish® electric
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 0 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 2 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 100 mm
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 3 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH3 / Shank length: 150 mm
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 4 x 200
Screwdriver type: Crosstip (Philips) / Tip: PH4 / Shank length: 200 mm

5 Products
Product No.: 321N.PH2x100
from 7,85 EUR
excl. 19% tax
to the product family
The image displays six screwdrivers of various sizes. The handles are red with yellow accents and the inscription
TORX® VDE screwdriver set, 6-piece SlimFix
Screwdriver type: Torx
Torx screwdriver set, 6-piece VDE
"Wiha SoftFinish electric slimFix"
325.TX 8 x 60, 325.TX9x60
3251.T10, 3251.T15, 3251.T20, 3251.T25

Product No.: 3251N.K6.01
55,75 EUR
excl. 19% tax
Show product
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 SoftFinish®
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 1.5 x 75
Screwdriver type: Hexagonal / Ballpoint / Tip: SW1,5 / Shank length: 75 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 2.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,0 / Shank length: 100 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 2.5 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW2,5 / Shank length: 100 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 3.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0 / Shank length: 100 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 4.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW4,0 / Shank length: 100 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 5.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW5,0 / Shank length: 100 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 6.0 x 125
Screwdriver type: Hexagonal / Ballpoint / Tip: SW6,0 / Shank length: 125 mm
The image shows a screwdriver with a long, slender steel blade and an ergonomic handle. The handle is red and black with the inscription
Hexagon ballpoint screwdriver 367 8.0 x 150
Screwdriver type: Hexagonal / Ballpoint / Tip: SW8,0 / Shank length: 150 mm

8 Products
Product No.: 367.100x2.0
from 5,70 EUR
excl. 19% tax
to the product family
49 to 64 (from a total of 89)