Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco EPApro Gotschlich ideal tek SCS Simco
The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image shows a rectangular, black device with a blue front. On the blue surface are two small green buttons and a red light. A USB cable leads away from the device.
Preview: The image shows a black USB cable with a rectangular connector on one end. The other end has a flat USB plug. The cable is heavily coiled and has a textured surface on the connector part.
Preview: The image shows five thin, rectangular cards lying next to each other. In the bottom left, there is an RFID (radio waves) symbol depicted, showing wavy lines.
Preview: The image shows a long, yellow, trapezoidal plastic block. Next to it are three small, silver screws. The block could be part of an assembly system.
Preview: Image
Preview: The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image displays a small USB-WLAN adapter. It is primarily silver with a black base. On the front, there are two narrow openings and the model name TP-LINK.
Preview: The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
EPApro® Personnel Tester 1000 accessories
PC-RFID Reader, USB for EPApro®
External temperature/humidity sensor for EPApro®
ID card High Frequency for EPApro®
ID card Low Frequency for EPApro®
Divider for footwear electrode EPApro®
Footwear electrode for EPApro®
EPApro® calibration unit 1000
EPApro® WLAN Adapter
Test mat for EPApro®
Pedestal set for EPApro®

10 Products
Product No.: EPApro.1001.ZPM
from 31,50 EUR
excl. 19% tax
to the product family
The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: Image
Preview: The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: Image
Preview: The image displays a large green puzzle piece icon positioned on various devices such as a monitor, a tablet, and a smartphone against a bright background.
EPApro® Control Server
EPApro® Control Server license
EPApro® Personnel Tester device license
EPApro® Control Server - application module training
EPApro® Control Server technical add-on module individual measurement configuration
EPApro® Control Server technical add-on module Microsoft SQL connector

5 Products
Product No.: EPApro.1000.LI-2
Price on request
to the product family
The image shows an open, black suitcase with a foam-padded interior. Inside, there is a yellow device with a display, buttons, and additional accessories.
Preview: The image displays a compact, rectangular measuring device in bright yellow with a digital display and a large rotary knob. There are several buttons and a carrying strap on the side.
Preview: The image shows an open black suitcase with a yellow device and various accessories, surrounded by pink foam. The suitcase is sturdy and equipped for safe transport.
Preview: The image shows an open, black suitcase with a foam-padded interior. Inside, there is a yellow device with a display, buttons, and additional accessories.
Metriso® B530 Basic measuring device
Metriso B530 Basic meter single
Version: single device / Recommended calibration interval: 24 months bzw. according to test equipment list
Metriso B530 Basic test kit, complete with measuring electrodes type 870
Version: complete kit, with measuring electrodes type 870 / Recommended calibration interval: 24 months bzw. according to test equipment list
Metriso B530 Basic test kit, complete with measurement electrodes type 850
Version: complete kit, with measuring electrodes type 850 / Recommended calibration interval: 24 months bzw. according to test equipment list

3 Products
Product No.: 7100.B530.MK.850
from 890,00 EUR
excl. 19% tax
to the product family
Image
Preview: Image
Preview: Image
Belt barrier posts
Belt barrier post, yellow
Color: yellow / Post height: 960 mm / Plate diameter: 350 mm
Belt barrier post, black
Color: black / Post height: 960 mm / Plate diameter: 350 mm

2 Products
Product No.: 1801.G.P.Y
128,60 EUR
excl. 19% tax
to the product family
The image shows a small, white humidifier with a front ventilation grille. On the front, there is a blue-and-white logo and two control lights.
minION2 - Portable ionizer
minION2 - Portable Ionizer
Width : 98 mm / Height : 136 mm / Depth : 60 mm / Discharge time max.: 2 s / Coverage: 300 x 1200 mm
minION2 - Portable Ionizer with power supply unit
Width : 98 mm / Height : 136 mm / Depth : 60 mm / Discharge time max.: 2 s / Coverage: 300 x 1200 mm

2 Products
Product No.: 7500.M2.plus
from 632,00 EUR
excl. 19% tax
to the product family
The image shows a handy device with a black casing and a yellow surface. It has a digital display and several buttons, including a large red central button.
SRM 200 Surface resistance meter
ESD
SRM 200 - surface resistance meter
handheld meter for the testing of
conductive and disspative surfaces

Product No.: 7100.SRM200
567,00 EUR
excl. 19% tax
Show product
The image displays a digital electrofield meter. It features a rectangular shape, a gray front with a large display in the center, and two antennas on top. Buttons are arranged below it.
Preview: The image displays a digital electrofield meter. It features a rectangular shape, a gray front with a large display in the center, and two antennas on top. Buttons are arranged below it.
Preview: The image shows an open, black suitcase with foam inserts. Inside the suitcase, there is a charger, a spiral cable, and a free space for another device.
EFM 022 Electric field meter
EFM 022 Electric field meter
Accessory Kit for EFM 022

2 Products
Product No.: 7100.EFM022
from 200,00 EUR
excl. 19% tax
to the product family
Image
Single station ES-19.337
Single station ES-19.337 , permanent monitoring
Monitoring monitor 24V, incl. power supply 220V,
Parking Delay Switch
Connection type:
- Grounding cable DK 3 mm or DK 10 mm (parking position)
- BA plug 4 mm or DK 10 mm (operator)
- Table covering / grounding cable DK 10 / screw eyelet

Permanent monitoring for hand belts and table coverings with 1-pin grounding cables


Serial No.:

Product No.: 7110.337
363,00 EUR
excl. 19% tax
Show product
The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.WK
from 43,90 EUR
excl. 19% tax
to the product family
The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
Ionizing blower 5810i - overhead model
ESD-protective
Ionizing blower 5810i - overhead model with 2 fans
ESD / Width : 155 mm / Height : 96 mm / Length : 813 mm / Version: overhead unit, mit 2 fans / Coverage: 610 x 1220 mm
Ionizing blower 5810i - overhead model with 3 fans
ESD / Width : 155 mm / Height : 96 mm / Length : 1016 mm / Version: overhead unit, with 3 fans / Coverage: 610 x 1220 mm

2 Products
Product No.: 7500.C40X
from 1.701,00 EUR
excl. 19% tax
to the product family
The image displays an open, silver suitcase. Inside, there is a yellow device, numerous buttons, cables, and compartments, all neatly organized in a foam-padded interior.
ESD Audit case B530 with walking test set and electrode
ESD-protective
ESD audit case Metriso B530 with electrode type 850
ESD / Version: with electrode type 850 / Recommended calibration interval: 24 months bzw. according to test equipment list / Length : 575 mm / Width : 490 mm / Height : 250 mm
ESD audit case Metriso B530 with electrode type 870
ESD / Version: with electrode type 870 / Recommended calibration interval: 24 months bzw. according to test equipment list / Length : 575 mm / Width : 490 mm / Height : 250 mm

2 Products
Product No.: 7110.B530.SET.WT.850
from 4.414,00 EUR
excl. 19% tax
to the product family
Image
Preview: Image
Preview: The image shows a black power supply unit with two electrical cables leading out. On the right side, there is a small illustration of a handheld device with a long handle and a connector.
Preview: The image shows a black foot pedal with a non-slip surface. It has a cable that can be connected to an electrical device. Some technical information is displayed on the top.
Preview: The image displays a black power adapter with two plug pins for the socket. A black cable leads to the connector, which has a round socket. The cable is long and flexible.
Preview: The image shows a clear socket insert with two metallic contacts. The contacts are each long, flat pins protruding from a transparent plastic base.
Preview: The image displays a transparent filter with two connections. On the filter, the words
Accessories for ionizing guns
Filter Nozzle Set for ionizer gun Top Gun TG3
Power supply unit for ionizer gun ION 6115 AirForce
Foot switch für ionizer gun ION 6115 AirForce
Exchangeable wall transformer for Air Gun 980E
Exchangeable nozzle tip for Air Gun 980E
Exchangeable air filter for Air Gun 980E

6 Products
Product No.: 7500.TG3.Z1-2
from 76,45 EUR
excl. 19% tax
to the product family
The image displays a black surface resistance meter with a large white button in the center and two sockets at the bottom. Colored scales for resistance values are shown at the top.
SRM 110 Surface resistance tester
SRM 110 - surface resistance meter
incl. storage bag, grounding wire,
9V battery and factory calibration certificate

Serial no.:

Product No.: 7100.SRM110
268,00 EUR
excl. 19% tax
Show product
The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image displays an electronic device with a black casing and yellow labels. A cable connects it to a yellow round unit, which also has a connector.
Preview: The image shows a black device with yellow lettering, two buttons, and a connector. Next to it lies a black plug with two prongs and a short cable.
Safety Pips
Tester Safety Pips with warning signal
Width : 60 mm / Height : 26 mm / Length : 125 mm / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 9 V
Tester Safety Pips with warning signal incl. grounding plug
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: incl. grounding plug / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V
Tester Safety Pips with signal contact
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: with signal contact / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V

3 Products
Product No.: 7100.181
from 110,50 EUR
excl. 19% tax
to the product family
The image shows an open, black suitcase. Inside, there is a yellow device with a display, two round buttons, a cable, and another device. Everything is neatly arranged.
SRM® 200 Verification Kit
ESD
SRM 200 - Verification Kit with case
Pocket instrument for the verification of
conductive and dissipative surfaces

Scope of delivery:
1 SRM 200 with accessories
2 flat electrodes model 820
1 mini probe model 410
1 hand electrode model 45
2 measuring lines
1 conductive carrying case
calibration certificate
serial number:

Product No.: 7100.SRM200.VK
929,00 EUR
excl. 19% tax
Show product
The image shows a rectangular, gray device with a round ventilation grille at the front. On the side, there is a rotary switch. Below, there is a colored sticker with model information.
ION 6422e - mobile ionizer
Discharge time max.: 4 s / Ion balance +/-: 20 V / Ozone generation max.: 0.004 ppm
ION 6422e- mobile ionizer ++SIMCO/ION++
bench-top model, 24V DC or 24V 50-60 Hz
without power supply unit
[ISO 5 / clean room class 100]

Product No.: 7500.6422
684,00 EUR
excl. 19% tax
Show product
17 to 32 (from a total of 122)