Fume extraction for volume extraction

Volume extraction systems are used to capture soldering fumes and airborne pollutants over larger working areas. Uniform capture at the emission source reduces the spread of particles and gases, which improves the air quality at the workplace. The use of such systems contributes to compliance with occupational health and safety requirements and supports the healthy design of soldering workstations, particularly in the case of large-scale or parallel soldering processes.

Image
Preview: The image displays a compact, rectangular device in blue and black with a ribbed surface. It might be a soldering iron stand or a similar technology. The front has a slightly curved shape.
Preview: Image
NEW
NEW
ZeroSmog Shield solder fume extraction
ESD-protective
Zero Smog Shield Pro solder fume extraction
ESD / Max. vacuum: 490 Pa / Air flow/hour: 32 m³ / Power: 20 W / Noise level: 59 dB
ZeroSmog Shield solder fume extraction "Black Edition"
ESD / Max. vacuum: 285 Pa / Air flow/hour: 26 m³ / Power: 10 W / Noise level: 50 dB

2 Products
Product No.: FT91019190
from 180,90 EUR
excl. 19% tax
to the product family
The image shows a suction device with two flexible hoses mounted on a table. The device has a black and turquoise surface with a glowing logo.
Preview: The image shows a compact device with a black casing and blue accents. It has a flexible neck that leads to a round light source, and bears the inscription
Preview: The image displays a compact, rectangular device in black and blue with a flexible, long hose that transitions into a funnel shape. It is a suction device, labeled with
Preview: The image shows a suction device with two flexible hoses mounted on a table. The device has a black and turquoise surface with a glowing logo.
ZeroSmog Guard solder fume extracrion kits
ESD-protective
ZeroSmog Guard Light solder fume extracrion kit1 ALFA incl. suction hose
ESD / Noise level: 50 dB / Power: 74 W / Numbers of connections: 1 / Air flow/hour: 100 m³ / Max. vacuum: 2,700 Pa
ZeroSmog Guard solder fume extracrion kit1 ALFA incl. suction hose
ESD / Noise level: 50 dB / Power: 74 W / Numbers of connections: 1 / Air flow/hour: 100 m³ / Max. vacuum: 2,700 Pa
ZeroSmog Guard 2 solder fume extracrion kit2 ALFA incl. suction hose
ESD / Noise level: 55 dB / Power: 142 W / Numbers of connections: 2 / Air flow/hour: 200 m³ / Max. vacuum: 2,250 Pa

3 Products
Product No.: FT91026699
from 737,00 EUR
excl. 19% tax
to the product family
The image shows a flexible, gray arm with a hose attached to a table. At the end of the hose, there is a round opening. The arm can be moved into various positions.
Preview: The image shows a flexible, black hose with a curved shape. It is attached to a base and ends in a wide, flat opening.
Preview: The image shows a flexible, black hose with a silver end. The hose is slightly curved and has a holder at the base, which is used for attachment.
Preview: The image shows a flexible hose with a black, spiral surface, attached to a solid holder. The hose curves and ends in an open, round opening.
Preview: The image shows a flexible vacuum cleaner arm. It has a metallic body that transitions into a long, black hose. The hose ends in a wide, open nozzle.
Preview: The image shows a flexible, gray arm with a hose attached to a table. At the end of the hose, there is a round opening. The arm can be moved into various positions.
Preview: The image displays a metallic telescope tube mounted at an angle on a holder. It features a shiny silver surface, a black lens rim, and an adjustable mount.
Preview: The image displays a flexible, silver arm of a swivel or projection device. It has distinct joints and a mount that is attached to a table.
Preview: The image shows a telescopic extension with two elongated tubes made of silver metal. The tubes are attached at a joint and have black eyelets at the ends. There is a mount at the bottom.
Preview: The image displays a silver device resembling a telescope. It features a cylindrical body, a black mounting element, and a round, tapered opening at one end.
Preview: The image shows a silver, metallic part with two tubes connected at an angle. It has black rubber grips and a black adjustment knob in the center.
Preview: The image shows a telescope. It has a silver, cylindrical body with black ends. There is an adjustable mount on the bottom that stabilizes it.
Easy-Click-60 Extraction arms
ESD-protective
Extraction arm KIT 1WF funnel
ESD
Extraction arm KIT 1 WF nozzle
ESD
Extraction arm KIT 1 WF 32 nozzle
ESD
Extraction arm KIT 1S WF joint arm with funnel
ESD
Extraction arm KIT 1S WF 2-joint arm with funnel
ESD
Double extraction arm 1 joint
Double extraction arm 2 joints
Double extraction arm 1 joint
Extraction arm 1 joint for wall mounting
Extension rotating joint
Extraction arm with ball joint

11 Products
Product No.: 536.579.99
from 183,75 EUR
excl. 19% tax
to the product family
The image shows a device that looks like a compact, rectangular box. It has a silver body and a black top with two outputs. It stands on small rollers.
MG 140 Extraction unit
ESD-protective
MG140 Extraction unit
ESD
MG140 Extraction unit for cleanroom
ESD

2 Products
Product No.: 145-1000-ESD
from 1.948,75 EUR
excl. 19% tax
to the product family
The image displays a square, brown cardboard box with a black plastic frame. At the top, a white, textured surface is visible. On the front, there is a label with technical information.
Preview: The image shows a square, flat object in white. It has a uniform, smooth surface and appears soft and light. It could be a piece of foam or a similar material.
Preview: The image shows a square box made of cardboard-like material. A filter with a structured surface is visible on top. On the side, there is a label with technical information.
Preview: The image shows a square box made of brown cardboard with a white, diamond-shaped grid pattern on the top. Label on the side reads
Preview: The image shows a rectangular, flat plate in a bright, orange color. The surface appears somewhat uneven and fibrous, with no discernible patterns or details.
Preview: The image displays a square, flat object in white. The surface is even and soft, possibly a cushion or a mat. It has no discernible patterns or textures.
Preview: The image displays a square, soft material in a light, peach tone. The surface is slightly textured and appears to be fluffy. There is a caption in the center.
Preview: The image displays a square, brown cardboard box with a black plastic frame. At the top, a white, textured surface is visible. On the front, there is a label with technical information.
Preview: It is a square, flat container with a transparent, perforated top. The sides are made of brown cardboard, and the frame is dark. A label is visible.
Preview: The image shows a square, white cushion or pad. It is flat and has rounded corners, with a soft, smooth surface. The dimensions are uniform.
Preview: The image shows a square piece of material in soft pink. The surface is slightly textured and appears thin and somewhat transparent. It is lying flat on a surface.
Preview: The image shows a square, brown wooden box with a black border. The top is open and features white stripes. On the front, there is a label with information attached.
Preview: The image shows a square, brown cardboard box with a fine grid on the top. On the front side, there is a label with information and a small handle.
Preview: The image displays a rectangular black frame holding several stacked, folded filters in soft red and pink hues. The filters are soft and lightweight.
Preview: The image displays a trapezoidal waste bin. It features a sturdy, silver frame at the top and is covered with green, soft material that tapers to a point at the bottom.
Replacement filter for Zero Smog solder fume extraction units EL, TL, 4V and 6V
ESD-protective
Fine dust filter F5 for Zero Smog 2 and Zero Smog EL
ESD
Filter set E12 with 10 pre-filters F5 for Zero Smog 2 and Zero Smog EL
Particulate filter F7 for Zero Smog TL
Filter set for Zero Smog TL
Fine dust filter F5 for Zero Smog 4V
ESD
Fine dust filter F7 for Zero Smog 4V
ESD
Compact filters for Zero Smog 4V
ESD
Compact filters for adhesive vapors for Zero Smog 2 and 4V
Fine dust filter M5 for Zero Smog 6V
ESD
Fine dust filter F7 for Zero Smog 6V
ESD
Compact filter for Zero Smog 6V
Wide band gas filter for Zero Smog 6V
ESD
Bag filter F7 for Zero Smog 4V and 6V
ESD
Non-woven filter for Zero Smog 4V and 6V

14 Products
Product No.: 587.359.36
from 50,75 EUR
excl. 19% tax
to the product family
The image displays a gray device labeled
Preview: The image displays a device for extracting vapors. It features a rectangular, silver-colored body with four openings on top and a flexible, hose-like outlet pointing to the right.
Preview: The image displays a gray device labeled
Preview: The image shows a smoke extraction device. It has a large, gray body with several openings on top. A flexible hose leads to an open, black exit area.
Preview: The image shows a smoke extraction device with a rectangular, gray casing and two black, flexible hoses that are bent upwards providing exhaust air.
Zero Smog 4V solder fume extraction kits
ESD-protective
Solder fume extraction unit Zero Smog 4V Kit1 nozzle
ESD
Solder fume extraction unit Zero Smog 4V Kit2 Nozzle
ESD
Solder fume extraction unit Zero Smog 4V Kit1 funnel
ESD
Solder fume extraction unit Zero Smog 4V Kit1 funnel
ESD

4 Products
Product No.: 536.656.99
from 2.175,60 EUR
excl. 19% tax
to the product family
It shows a square, brown cardboard box with a black lid. On top are two round openings, and on the side there is a label with text and numbers.
Preview: The image shows a rectangular waste bin made of brown material. It has a black lid with two round openings. The bin stands stable on a flat base.
Preview: The image shows a long, rectangular mat in soft pink. The surface is soft and slightly textured, with a fluffy appearance reminiscent of cotton.
Preview: It shows a square, brown cardboard box with a black lid. On top are two round openings, and on the side there is a label with text and numbers.
Preview: The image shows a square, brown cardboard box with two round openings on the top. On the front, there is a label with the name
Preview: The image shows a rectangular container with a mesh surface and two side handles. The container is likely intended for storing or filtering materials.
Preview: The image shows a vertical, rectangular cardboard box with a black frame on top and a white label on the front. The box has an open top edge.
Preview: The image shows a square cardboard box with brown cardboard and a white lid. The box has black edges and a label with the inscription
Preview: The image shows a square, brown cardboard box with a black border at the top. There is a sticker with product information on the side. The box is empty.
Preview: The image shows a flat, rounded base in light gray with two upright, cylindrical, black tubes on top. The tubes are of equal size and stand parallel to each other.
Preview: The image shows a square, brown cardboard container with a black edge on top. On the front, there is a label with information and a logo.
Replacement filter for MG solder fume extraction units
ESD-protective
Compact filter for MG 130
Fine dust filter F7 for MG 130
Compact filter standard for MG 100S
Compact filter MEK for MG 100S
Compact filter solvents for MG 100S
Compact filter standard for MG 140
Compact filter cleanroom for MG 140
Compact filter solvents for MG 140
Fine-dust filter F8 for MG 140
Compact filter MEK for MG 140

10 Products
Product No.: 100-2000-ESD
from 38,30 EUR
excl. 19% tax
to the product family
The image shows a suction device with a square, silver top and a black bottom. A flexible, black hose extends from the machine to a wide nozzle.
Solder fume extraction unit Zero Smog EL Kit 1
Zero Smog EL Kit 1 solder fume extraction unit
incl. ALFA, 0F15, filter kit H13 (587.627.01)

Product No.: FT91012699
818,35 EUR
excl. 19% tax
Show product
The image displays a flexible, corrugated hose in black. It features smooth openings at both ends and is shaped in an arc. Ideal for connecting to devices or apparatuses.
Preview: A flexible, black hose with a wide opening on one side and a narrower one on the other. It has a ribbed surface and an arched shape.
Preview: The image displays a flexible, corrugated hose in black. It features smooth openings at both ends and is shaped in an arc. Ideal for connecting to devices or apparatuses.
Preview: The image shows a black light modifier shaped like a funnel. It has a wide, flat rim and a narrower opening at the top, with an attachment option.
Preview: The image shows a round, silver exhaust pipe with a black bracket. It has a smooth surface and a slightly tapered opening on one side.
Preview: The image shows a silver, cylindrical object with a wide, open end and a black, round connector at one end. It appears metallic and smooth.
Preview: The image displays a silver exhaust with a black edge. At the front, there is a round, metallic grille insert visible that protects the opening.
Preview: The image shows a triangular, black object with a round opening in the middle. It has a smooth surface and a slightly curved shape that resembles a funnel.
Preview: The ring is made of metallic material, has a matte surface, and is cylindrical. It is hollow inside and has a uniform, smooth structure. The edges are clean and even.
Preview: The image shows a black component with a round base and a conical body. In the middle, there is a white ring. It appears to be a part possibly intended for pipe or hose connections.
Preview: The image shows a curved pipe section made of black and white materials. It has a flat base with holes for mounting. There is a connector at one end.
Preview: The image shows a flexible, corrugated hose in a U-shape. It has black transitions at both ends and a gray striped surface.
Preview: The image shows a cylindrical object with black ends and a white middle section. It has a smooth, solid handle and a small button on the side.
Preview: The image displays a T-shaped object in silver and black, with three round, solid sections. It has screws visible on the surface. The structure appears sturdy.
Preview: The image shows an accessory optical part, usually black and silver in color. It has a cylindrical shape with a coarser, rubberized grip and a chrome-plated adjustment knob.
Preview: The image displays a telescope accessory: a black and white sight with a circular end, alongside two metallic C-shaped brackets. All parts provide stability.
Preview: The image displays two silver metal clips. Each has a C-shape with a long, straight shaft and a small, triangular end. They are arranged next to each other.
Preview: The image shows a black, cylindrical object with a thick, round end and a narrower, straight end. A white seal is visible, marking the transition between the parts.
Preview: The image shows a black, cylindrical adapter with a divided surface. Next to it are two oval rubber rings that serve as seals.
Accessories for volume extraction Easy-Click-60
ESD-protective
ESD sloped aluminium nozzle WF 32
ESD
Extraction arm flexible, 0.7 m
ESD
Extraction arm, flexible 1m
ESD
Easy-Click 60 ESD funnel-shaped nozzle
ESD
WF 60 sloped nozzle
ESD
Easy-Click 60 sloped nozzle
ESD
Easy-Click 60 sloped nozzle with grill insert
ESD
Easy-Click 60 nozzle
ESD
Adapter
Easy-Click 60 extraction hose straight
ESD
Easy-Click 60 extraction hose 90° bent
ESD
Easy-Click 60 extraction hose
ESD
Easy-Click 60 extraction hose
ESD
Easy-Click 60 double plug-in connection
ESD
Easy-Click 60 T-piece
Easy Click 60 WFV stop valve
Easy Click 60 stop valve
Table clamp set
Adapter 40/60
50/60 Hose connection adapter
ESD

20 Products
Product No.: 0F10
from 8,25 EUR
excl. 19% tax
to the product family
The image shows a device with a rectangular casing, from which two flexible hoses protrude. The hoses are black and slightly curved, running across a table.
Preview: The image depicts a device with two long, flexible hoses that bend upwards. It is placed on a table and has a black, square base with controls on the side.
Preview: The image shows a device with a rectangular casing, from which two flexible hoses protrude. The hoses are black and slightly curved, running across a table.
MG 130 extraction unit kits
ESD-protective
Fume extraction unit kit MG 130 Kit nozzle
ESD
Fume extraction unit MG 130 Kit funnel
ESD

2 Products
Product No.: FT91000103
from 1.339,05 EUR
excl. 19% tax
to the product family
The image displays a smoke extraction device with a silver casing and a flexible, black hose aimed at a work surface.
Preview: The image displays a smoke extraction device with a silver casing and a flexible, black hose aimed at a work surface.
Preview: The image shows a white device with two tubes on top, used for air purification. It has a straight rectangular shape and the inscription
MG 100S Extraction unit kits
ESD-protective
Extraction unit MG 100S Kit 1 with funnel
ESD
Extraction unit MG 100S Kit 2 with funnel
ESD

2 Products
Product No.: 100-1056-ESD
from 1.988,00 EUR
excl. 19% tax
to the product family
The image shows a silver air purifier with three black openings on top. It has a control area with buttons and a display on the front and is mounted on wheels.
Zero Smog 4V solder fume extraction
ESD-protective
Zero Smog 4V solder fume extraction
ESD
Zero Smog 4V solder fume extraction for adhesive vapors
ESD

2 Products
Product No.: 536.616.99
from 1.880,80 EUR
excl. 19% tax
to the product family
The image displays a gray device with a rounded lid and a hose that curves upward in an arch-like shape. The hose features a wide, open nozzle.
Preview: The image displays a gray device with a rounded lid and a hose that curves upward in an arch-like shape. The hose features a wide, open nozzle.
Preview: The image shows a device with two long, flexible hose arms extending from a rectangular casing on a table. The hoses are black and curved.
Preview: The image shows a device with two flexible hose arms extending from a square casing on a table. The hoses are black and round at the ends.
Zero Smog TL solder fume extraction kits
Solder fume extraction unit Zero Smog TL Kit 1 FN
Solder fume extraction unit Zero Smog TL Kit 2 FN
Solder fume extraction unit Zero Smog TL Kit 2 SN

3 Products
Product No.: FT91015699
from 1.226,10 EUR
excl. 19% tax
to the product family
The image displays a digital control unit with a blue screen. It shows values such as power (99%), time (01497 h), and features operable buttons below the screen.
Preview: The image displays a digital control unit with a blue screen. It shows values such as power (99%), time (01497 h), and features operable buttons below the screen.
Preview: The image shows a gray cable with two connectors. Both ends are specially shaped, one has a rounded side with several small holes, the other is rectangular with a blue edge.
Accessories for MG extraction units
ESD-protective
Remote control for MG units
ESD
Connecting cable for remote control WCB2

2 Products
Product No.: 700-3057
from 17,90 EUR
excl. 19% tax
to the product family
The image shows a rectangular, silver-colored device with two round outlet openings on top. It has a black top with the inscription
MG100S Extraction unit
ESD
MG100 solder fume extraction unit ESD, 230 V
control and monitoring system equipped with
microprocessor
suitable for the connection of 2 extraction arms

Product No.: 100-1000-ESD
1.822,40 EUR
excl. 19% tax
Show product
The image displays a compact device in black and turquoise. It has a smooth front with a blue light strip and several control symbols. Ideal for use in workshops.
Preview: The image shows a small, rectangular device, primarily in black with blue accents. On the front, the
Preview: The image displays a compactly designed switch device. It features a black front with a blue LED strip and a light blue top. The front is equipped with symbols for operation.
Preview: The image displays a compact device in black and turquoise. It has a smooth front with a blue light strip and several control symbols. Ideal for use in workshops.
ZeroSmog Guard solder fume extraction
ESD-protective
ZeroSmog Guard Light solder fume extracrion for 1 workstation
ESD / Noise level: 50 dB / Power: 74 W / Numbers of connections: 1 / Air flow/hour: 100 m³ / Max. vacuum: 2,700 Pa
ZeroSmog Guard solder fume extracrion for 1 workstation
ESD / Noise level: 50 dB / Power: 74 W / Numbers of connections: 1 / Air flow/hour: 100 m³ / Max. vacuum: 2,700 Pa
ZeroSmog Guard 2 solder fume extraction for 2 workstations
ESD / Noise level: 55 dB / Power: 142 W / Numbers of connections: 2 / Air flow/hour: 200 m³ / Max. vacuum: 2,250 Pa

3 Products
Product No.: FT91022699
from 573,35 EUR
excl. 19% tax
to the product family
1 to 16 (from a total of 23)