Image
Image
Image
Image
Image
Image
Preview: Image
Preview: Image
Preview: Image
Preview: Image
Preview: Image
Preview: Image

Product Family

Safety shoe RED EGO S3 Stinger / Maverick / Jester / Ezra

The Stinger / Maverick / Jester / Ezra safety shoes from U-Power set new standards in safety and design. This model from the RED EGO series features an upper made of Putek® Hexagon, which is not only abrasion-resistant but also water-repellent and breathable. The combination of a FiberToe toe cap and an ultra-light, puncture-resistant insole guarantees optimal protection for the feet. The slip-resistant EVA and rubber sole provides additional stability and emphasizes the shoe's distinctive look.

The safety shoes are completely metal-free and comply with safety class S3S with additional requirements such as heat resistance, oil resistance, and cold and heat insulation. It is available in sizes 35 to 48 and is suitable for both genders. Its ESD capability makes it ideal for work environments where electrostatic discharge can pose a risk.

The variants in this product family differ in the following characteristics:

  • BOA or lace fastening

Article image
Article description
ESD
Color
Size
Category
Form
Closure
Price
Compare
NEW
UP-20074RE - Safety shoe Maverick
black / yellow
35-48
S3S
low shoe
lace fastening
NEW
UP-20084RE - Safety shoe Stinger
black / light blue
35-48
S3S
low shoe
lace fastening
NEW
UP-20094RE - Safety shoe Jester
black / grey
35-48
S3S
low shoe
lace fastening
NEW
UP-20144RE - Safety shoe Ezra
black / grey
35-48
S3S
low shoe
Boa®
Show Compare List (0)

This product is compatible with (for example):

The image shows a spray can with a black lid and a gray body. On the front it says "WOLY PROTECTOR" and "Waterproof". A blue fabric surface is depicted, moistened with water droplets.
Protector 3 x 3 WOLY, 250 ml aerosol
Highly effective impregnation spray for all
smooth and suede leather and textiles, also with
climate membrane (TeX materials).

14,65 EUR
excl. 19% tax
The image shows a black spray bottle with a round, transparent lid. The label on the bottle reads "WOLY HIGH TECH LOTION" in white and blue lettering.
High-tech lotion WOLY, 75 ml
Rich care emulsion specially for high-tech
materials in smooth leather, as well as for
reptile and patent leather.

11,05 EUR
excl. 19% tax
The image shows a black sock with a medium-high shaft. At the foot end, a yellow logo or symbol is visible. The sock appears simple and unobtrusive.
ESD socks Basic / ELTEN
Color: black
Sizes 35-38, 39-42, 43-46, 47-50

86% cotton, 12% polyester, 1% elastane, 1% Bekinox®

5,85 EUR
excl. 19% tax
The image shows a gray packaging of an instant shine sponge from the brand Bama. It features the product name in uppercase letters and includes instructions for use. The background is plain.
Instant gloss sponge Bama, 5 ml
Especially for smooth leather shoes. Protects and
gives intense gloss
Color: neutral

4,35 EUR
excl. 19% tax
The image shows a gray spray can with the brand name "Bama". It features purple lettering that reads "A Wax Care". The design is minimalist and displays a stylized illustration of shoes.
Fine wax care Bama, 250 ml
Especially for smooth leather shoes. Cares,
protects and gives shine. Special care for
sensitive and high-quality smooth leather
Color: neutral

10,55 EUR
excl. 19% tax
The image shows a silver spray can with the imprint "Bama Clean & Care". The can has a round lid and a colored lower area with a description of how to use it.
Cleaning and care foam Bama, 300 ml
Active foam for effective cleaning
for all shoe materials

13,10 EUR
excl. 19% tax
The image displays a spray can with a silver cap and colorful labeling. The product name "Bama" is clearly visible. It is a shoe care product with various application instructions.
Active Universal Care Bama, 300 ml
cares, protects, refreshes the colors and
maintains breathability. For all materials

12,10 EUR
excl. 19% tax
In the image, there is a spray can visible. It has a gray color with purple and red accents. The logo "Bama" is prominently placed. The product protects against water and stains.
Impregnation Bama, 400 ml
Protects against water and stains.
Without the addition of PFCs

9,00 EUR
excl. 19% tax
The image shows a pair of black socks with a high shaft. On one side, the word "Sievi" is visible in red color. The socks have reinforced heels.
ESD socks Sievi
ESD / Size: 36-46
ESD socks "Sievi", color grey
Sizes 36-39 , 40-42 , 43-46


66% cotton, 31% polyamide, 2% elastane, 1% carbon fiber

8,99 EUR
excl. 19% tax
In the picture is a black sock with various textures and patterns. The sock features colored accents in blue and orange and is cut to mid-calf length.
  End of Life
-22%
  End of Life
-22%
ESD socks Bata >ALL SEASONS WOOL<
antibacterial, dissipative, color: anthraqcite
available sizes: 35-38, 39-42, 43-46, 47-50
DIN EN 61340-5-1

-Lagerabverkauf / Sonderpreis-


Our standard price 8,90 EUR
Your price 6,94 EUR
excl. 19% tax
The image shows a gray sock. It has a higher shaft, reinforced areas at the heel and toe, and a fine pattern. The "Panther" lettering is highlighted in orange.
  End of Life
-25%
  End of Life
-25%
ESD socks Bata >ALL SEASONS COTTON<
antibacterial, dissipative, color: grey
available sizes: 35-38, 39-42, 43-46, 47-50
DIN EN 61340-5-1

-Lagerabverkauf / Sonderpreis-


Our standard price 7,80 EUR
Your price 5,85 EUR
excl. 19% tax
The image shows a white sock being worn on a foot. At the top edge, there is a ribbed pattern, and on the side, a black logo is visible. The foot is slightly raised.
ESD Line socks, dissipative
Color: white/grey, size L / 41-42
(DIN EN 61340-5-1)

8,07 EUR
excl. 19% tax
The image shows a white sock being worn on a foot. At the top edge, there is a ribbed pattern, and on the side, a black logo is visible. The foot is slightly raised.
ESD Line socks, dissipative
Color: white/grey, size M / 39-40
(DIN EN 61340-5-1)

8,07 EUR
excl. 19% tax
The image shows a white sock being worn on a foot. At the top edge, there is a ribbed pattern, and on the side, a black logo is visible. The foot is slightly raised.
ESD Line socks, dissipative
Color: white/grey, size S / 36-38
(DIN EN 61340-5-1)

8,07 EUR
excl. 19% tax
The image shows a white sock being worn on a foot. At the top edge, there is a ribbed pattern, and on the side, a black logo is visible. The foot is slightly raised.
ESD Line socks, dissipative
Color: white/grey, size XL / 43-45
(DIN EN 61340-5-1)

8,07 EUR
excl. 19% tax
The image shows a white sock being worn on a foot. At the top edge, there is a ribbed pattern, and on the side, a black logo is visible. The foot is slightly raised.
ESD Line socks, dissipative
Color: white/grey, size XXL / 46-48
(DIN EN 61340-5-1)

8,07 EUR
excl. 19% tax
The image shows a tall, black sock with gray and blue accents on the toe. The top edge is elastic, and the fabric appears soft and comfortable.
ESD socks Bata Cool LS 1 black - professional...
ESD / Color: black / grey / Sex: unisex
ESD socks Bata Cool LS 1 black-professional,.
antibacterial, dissipative, color: black/grey
available sizes: 35-38, 39-42, 43-46, 47-50
DIN EN 61340-5-1

6,55 EUR
excl. 19% tax
The image shows a black sock. It is ankle-high, made of a smooth material, and has a blue line on the side. The sock appears simple and functional.
ESD socks Bata Cool LS 2 black-professional,.
antibacterial, dissipative, color: black
available sizes: 35-38, 39-42, 43-46, 47-50
DIN EN 61340-5-1

6,60 EUR
excl. 19% tax
The image shows a black sock with a high shaft. On the outside, there is a yellow logo with a mountain symbol woven in. The foot area has a gray structure.
ESD socks 8201 light JALAS
Color: black/grey
Sizes 36-38, 39-41, 42-43, 44-45, 46-47

Material: 50% Lenzing modal, 36% nylon, 12% polyester, 1% spandex, 1% carbon fiber

6,21 EUR
excl. 19% tax
The image shows a pair of short, black socks with gray, textured patterns. They are ergonomically shaped and have a slim fit, ideal for athletic shoes.
Sneaker ESD socks "Sievi", color grey
Sizes 36-39 , 40-42 , 43-46


40% polyamide, 42% microlon polyamide, 14% polypropylene, 2% elastane, 2% carbon fiber

10,83 EUR
excl. 19% tax