ESD protection

Effective ESD protection is crucial to prevent damage to sensitive electronic components caused by electrostatic discharge. It comprises customizable solutions that are tailored to the specific requirements of the respective working environment.
Key components include personal grounding systems, ESD floor coverings and workstation sets that ensure a safe working environment that complies with standards. In addition, ionizing devices, marking systems and special cleaning agents support reliable protection in production. These measures protect both the products and the employees and ensure compliance with the relevant ESD standards.

The image shows a cleaning cart with a red trash bag, mop, and bucket. It has four wheels and various holders for cleaning agents and accessories.
ESD Cleaning trolley type RW-1205.ESD
ESD
ESD cleaning trolley type RW-1200.ESD
++ for the maintenance cleaning in the EPA++
sturdy metal frame, chrome-plated
dimensions: 62 x 57 x 100 mm,
4 ESD swivel castors 75 mm
consisting of:
-1 x X-shaped frame with 4 ESD swivel castors 100 mm
- 1 x supporting frame for 120 liter garbage bags
- 1 x supporting frame with 2 wire baskets


electrically conductive (DIN EN 61340-5-1)

Product No.: 2900.RW-1205.ESD
347,00 EUR
excl. 19% tax
Show product
The image shows a rollable metal waste cart with two separate, transparent, pink trash bags. It has four wheels and is sturdily constructed.
ESD recycling cart double capacity
ESD
ESD recycling cart double capacity, chrome-plated
dimensions: 82x50x106 mm
( for 2 x 120 liter garbage bags)
consisting of:
- 1 x basic frame single capacity, with 4 ESD swivel castors 100 mm
- 2 x supporting frame for 120 liter garbage bags
- 2 x sidestay
- 2 x garbage bag clip (3 pieces)

electrically conductive (DIN EN 61340-5-1)

Product No.: 2900.TW-200.ESD
337,90 EUR
excl. 19% tax
Show product
The image shows a black shovel with a long, thin handle. The shovel has a wide, flat scoop that is suitable for picking up material.
ESD Dustpan with long handle
ESD
Dustpan ESD with long handle
Total height 1260 mm, volume 6 liters
dissipative (DIN EN 61340-5-1)

Product No.: 6105.KS.L
169,60 EUR
excl. 19% tax
Show product
The image shows a white bracket with a long, vertical arm that has two holes at the top for wall mounting. At the bottom, there is a swivel mechanism that secures the bracket.
Preview: The image shows a mechanical arm that is movable at two joints. At one end, there is a clamp to attach the tool. The color is light and metallic.
Preview: The image shows a white bracket with a long, vertical arm that has two holes at the top for wall mounting. At the bottom, there is a swivel mechanism that secures the bracket.
Tarifold IDP-STAT® accessories
Tarifold IDP-STAT pivoting arm
Tarifold IDP-STAT telescopic table-top holder

2 Products
Product No.: 5600.120
from 57,45 EUR
excl. 19% tax
to the product family
The image displays a black barrier with yellow horizontal stripes. In the center, there is a yellow symbol shaped like a triangle featuring a fire icon and the inscription
EPA barrier banner incl. 2 cartridges
ESD
EPA stop banner incl. 2 cartridges with
metal connectors, dissipative vinyl, washable
dimensions.: 1220 x 840 mm, holm length 1340 mm
Exterior printed with EPA logo
2 post pipes are required for installation
(not included)

Product No.: 1801.B.V
356,25 EUR
excl. 19% tax
Show product
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide

Product No.: 7100.PGT120.COM.TC18
Price on request
Show product
The image shows a white fan with a large, round grille at the front. It has a rotary knob on the side and a small display below, which may indicate the operational status.
Ionizing blower 5802i CXL - mobile tabletop model
ESD / Discharge time max.: 1 - 2 s / Ozone generation max.: 0.008 ppm
Ionizing blower 5810i CXL +SIMCO+
mobile tabletop model, Steady State DC,
automatic ermitter cleaning system,
base for table mounting, coverage 30x150 cm
incl. power supply unit
Serial No.:

Product No.: 7500.CXL
Price on request
Show product
The image shows a white-gray fan attached to a movable arm. The arm is made of metal and is green. The fan has a grid for air circulation and a small control light.
Spring joint arm for ionizer minION
Spring-loaded arm for MINion
incl. mounting bracket

Product No.: 7500.M.S
199,20 EUR
excl. 19% tax
Show product
The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
Preview: The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
Preview: The image displays a compact electric device with a digital display and three buttons. It features a black border and a light, textured background.
Ionizer Tester type CPM35 for verification tests
ESD-protective
CPM 35 Ionizer Tester
ESD
CPM 35 Rubber case with foot
ESD / Version: case with foot

2 Products
Product No.: 7100.CPM35
from 41,00 EUR
excl. 19% tax
to the product family
The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: It is a black, rectangular device with an outlet on top and a serial interface on the bottom. On the side, there is a switch labeled
WIM 47 Ionizer Monitor
ESD-protective
WIM 47 Ionizer Monitor
ESD
WIM 47 Switch Box

2 Products
Product No.: 7100.WIM47
from 157,00 EUR
excl. 19% tax
to the product family
The image shows a square, black ionizer tester with a yellow top. In the center, there is a screen, and below are buttons for
Ionizer Tester CPM54
CPM 54 Ionizer Tester for standard-compliant
measurement of
the discharge time and offset voltage of
ionizers, personal charging (Body Voltage
test), color display
Scope of delivery:
Ionizer Tester CPM54
3 x Lithium Ion Batteries
Charger with EU plug
Instruction manual (DE/EN)
Calibration certificate (DE/EN)

Product No.: 7100.CPM54
3.120,00 EUR
excl. 19% tax
Show product
The image displays a long, rectangular device in light colors. It has multiple outputs on the bottom and controls on the front, as well as blue lettering with the name
AeroBar MP 5635 Ionizing bar
AeroBar MP 5635 Ionizing bar 350 mm
Width : 34 mm / Height : 78 mm / Length : 450 mm / Active length: 350 mm / Emitters: 8 / Emitter spacing: 50 mm
AeroBar MP 5635 Ionizing bar 500 mm
Width : 34 mm / Height : 78 mm / Length : 600 mm / Active length: 500 mm / Emitters: 11 / Emitter spacing: 50 mm
AeroBar MP 5635 Ionizing bar 900 mm
Width : 34 mm / Height : 78 mm / Length : 1000 mm / Active length: 900 mm / Emitters: 13 / Emitter spacing: 75 mm
AeroBar MP 5635 Ionizing bar 1050 mm
Width : 34 mm / Height : 78 mm / Length : 1150 mm / Active length: 1050 mm / Emitters: 15 / Emitter spacing: 75 mm
AeroBar MP 5635 Ionizing bar 1500 mm
Width : 34 mm / Height : 78 mm / Length : 1600 mm / Active length: 1500 mm / Emitters: 31 / Emitter spacing: 75 mm

5 Products
Product No.: 7500.AB-MP.18
Price on request
to the product family
The image shows an elongated, gray device with a blue label. It has two small LED lights in different colors and is intended for wall mounting.
fusION - Mini Ionizer
fusION - mini ionizer (without blower), 24V DC
low space requirement,
dimensions: 51 x 33 x 89 mm (WxHxD),
emitter points: Tungsten
[ISO 6 / Cleanroom class 1,000]
Serial no.:

Product No.: 7500.FU
Price on request
Show product
The image shows a small, square fan. It has a black rotor in the center and a light, rectangular frame with four mounting holes in the corners.
Preview: The image shows a small, square fan. It has a black rotor in the center and a light, rectangular frame with four mounting holes in the corners.
Preview: The image displays a rectangular, gray housing part with two green LEDs and an opening. At the top, there is a square fan with a black blade surface.
Accessories for built-in ionizers
Blower pluggable, 40 x 40 x 10 mm for mini ionizer fusION
Power supply unit 230V AC / 24V DC for mini ionizer fusION

2 Products
Product No.: 7500.FU.FAN
Price on request
to the product family
Image
Nozzle attachments for ionizing spray nozzles
Nozzle attachment 60° Standard for EPAtec ion spray can
Nozzle attachment 200 mm for EPAtec ion spray can
Nozzle attachment 300 mm for EPAtec ion spray can
Nozzle attachment 400 mm for EPAtec ion spray can
Nozzle attachment 200 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment 300 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment 500 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment hose adapter for EPAtec ion spray can

8 Products
Product No.: 7501.OP-60S
Price on request
to the product family
The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
-10%
-10%
Ionizing blower 5810i - overhead model with 2 fans
Width : 155 mm / Height : 96 mm / Length : 813 mm / Version: overhead unit, mit 2 fans / Coverage: 610 x 1220 mm
Ionizing blower 5810i - Overhead model +SIMCO+
coverage 61 x 122 cm, automatic
ermitter cleaning system, Steady State DC),
Cleanroom class ISO 14644, class 4
(Power cable not included)
Serial No.:

Product No.: 7500.C32X-E
Our standard price 1.701,00 EUR
Your price 1.530,90 EUR
excl. 19% tax
Show product
337 to 352 (from a total of 353)